Bobcat TL30.60 Specifications
The Bobcat TL30.60 telehandler is a compact, powerful,
and highly maneuverable material-handling machine designed for professional
operations in construction, agriculture, industrial yards, landscaping, and
municipal services. With its 3,000-kg (6,614-lb) rated lift capacity and
5.96-6.0-meter (19 ft 7 in) maximum lift height, the TL30.60 offers a balance of
strength, stability, visibility, and compact physical dimensions that outperform
many similar-sized telehandlers.
The machine’s combination of permanent 4WD,
four steering modes, high-flow hydraulics, and a reinforced boom design
make it suitable for daily pallet handling, bulk loading, bale stacking,
material placement, small-space operations, and attachment-based work.
This model is equipped with the Bobcat D34 turbocharged diesel engine, a
modern powerplant designed for high reliability, optimized fuel
consumption, strong torque at low rpm, and emissions compliance. The D34
engine is widely used across Bobcat’s R-Series telehandler lineup due to
its robust design, simplified servicing, and dependable performance in
long-duty cycles. Paired with a hydrostatic transmission, the TL30.60
provides precise control at low speeds as well as smooth acceleration
for site mobility.
The telehandler’s reinforced chassis, protected hydraulic routing,
sealed axles, and heavy-duty boom design improve durability. The
ergonomically designed R-Series cab provides excellent forward
visibility, reduced noise and vibration, improved all-weather comfort,
intuitive controls, and a high-quality operator interface. The Power
Quick-Tach attachment system enables rapid tool changes, improving
productivity across multiple job types.
The Bobcat TL30.60 features the Bobcat D34 diesel
engine, a 3.4-liter turbocharged four-cylinder engine engineered to provide
smooth performance, high torque output, and lower emissions. The engine is tuned
for telehandler duty cycles where frequent lifting, idling, and variable load
work require predictable and stable torque at moderate rpm.
Engine Technical Data
- Engine type: 4-cylinder, 4-stroke, turbocharged diesel
- Displacement: 3.4 liters (207 cu.in)
- Power rating: approx. 74-100 hp (55-75 kW) depending on emissions package
- Torque: approx. 300-450 Nm (221-332 lb-ft), typical for D34 industrial
configuration
- Fuel system: high-pressure common-rail electronic injection
- Aspiration: turbocharged, air-to-air intercooled
- Emissions: Stage V / Tier 4 Final compliant
- Fuel type: Ultra-low sulfur diesel (ULSD)
- Idle speed: approx. 800-900 rpm
- Maximum governed speed: approx. 2,200-2,400 rpm
Lubrication System
- Type: full-pressure wet-sump
- Oil capacity: approx. 10-12 L (10.5-12.7 qt)
- Recommended oil: SAE 15W-40 (API CK-4 or higher)
- Filtration: spin-on full-flow oil filter
- Normal oil pressure: 30-55 psi under typical operating rpm
Cooling System
- Coolant type: water/ethylene-glycol 50/50 mixture
- Cooling capacity: approx. 15-18 L (15.8-19 qt)
- System pressure: approx. 14-17 psi (100-120 kPa)
- Water pump: belt-driven centrifugal
- Radiator: multi-row industrial core
- Fan: hydraulic or mechanical, depending on region
The TL30.60 is equipped with a hydrostatic drive system
designed for precise inching, smooth travel transitions, and strong pushing
power.
Transmission
- Transmission type: hydrostatic, variable displacement
- Maximum travel speed: approx. 30 km/h (18.6 mph)
- Low (creep) speed range: approx. 7-9 km/h (4-5.5 mph)
- Control: single-lever joystick or shuttle lever
- Transmission fluid: high-grade hydrostatic transmission oil
- Fluid capacity: approx. 10-15 L (10.5-16 qt)
Axles
- Drive system: permanent 4WD
- Axle type: heavy-duty planetary reduction
- Front axle: fixed for stability
- Rear axle: oscillating for terrain adaptability
- Oscillation: approx. 8-12°
- Axle oil: SAE 80W-90 or SAE 85W-140 depending on climate
- Axle capacity: approx. 3-4 L (3.1-4.2 qt) per axle
Brakes
- Service brakes: hydraulic wet-disc brakes (sealed, oil-immersed)
- Parking brake: spring-applied, hydraulic-release system
- Braking performance: fade-resistant, minimal maintenance
- System voltage: 12 V DC
- Alternator output: approx. 90-120 A
- Battery capacity: approx. 100-140 Ah
- Starter power: 2.5-3.5 kW
- ECU: electronic management for engine and safety systems
- Wiring: sealed, abrasion-protected harnesses
- Instrument panel: digital multifunction display showing engine status,
warnings, hydraulic indicators, travel mode, filter condition
- Frame: reinforced welded-steel chassis, heavy-duty
plates at boom mounts
- Wheel drive: 4WD, constant traction
- Standard tires: approx. 12-16.5 rough-terrain industrial tires
- Optional tires: Agricultural tread, Solid industrial, Flotation or non-marking
tires
- Ground clearance: approx. 290-310 mm (11.4-12.2 in)
- Undercarriage: steel skid plates and line protection
- Steering type: hydrostatic
- Steering modes: Front-wheel steer, Four-wheel coordinated steer, Crab steer
- Steering pump flow: approx. 20-25 L/min (5.2-6.6 gpm)
- Turning radius (outside wheels): approx. 3.4-3.8 m (134-150 in)
- Rear axle: oscillating for improved stability
- Hydraulic system type: load-sense industrial
hydraulic circuit
- Maximum hydraulic pressure: approx. 250-270 bar (3,600-3,900 psi)
- Pump type: engine-driven gear or gear/piston hybrid
- Auxiliary hydraulic flow: approx. 80 L/min (21.1 gpm)
- Hydraulic fluid: ISO VG 32/46
- Reservoir capacity: approx. 60-80 L (63-84 qt)
- Cylinders: double-acting lift, tilt, and extend cylinders
- Auxiliary couplers: standard quick-attach hydraulic ports at boom head
- Filtration: return-line filter with restriction indicator
| Service Refill Capacities |
- Engine oil: 10-12 L (10.5-12.7 qt)
- Coolant: 15-18 L (15.8-19 qt)
- Transmission oil: 10-15 L (10.5-16 qt)
- Axle oil: 3-4 L per axle
- Hydraulic oil: 60-80 L (63-84 qt)
- Fuel tank: approx. 80-100 L (21-26 gal)
- Rated lifting capacity: 3,000 kg (6,614 lb)
- Maximum lift height: approx. 5.96-6.0 m (19.5-19.7 ft)
- Maximum forward reach: approx. 3.0-3.2 m (9.8-10.5 ft)
- Lift capacity at max height: approx. 2,000-2,200 kg (4,409-4,850 lb)
- Lift capacity at max reach: approx. 900-1,100 kg (1,984-2,425 lb)
- Travel speed: 30 km/h (18.6 mph)
- Drawbar pull: approx. 28-35 kN (6,300-7,900 lbf)
- Boom breakout force: approx. 30-35 kN
- Bucket breakout force: approx. 40-45 kN
- Auxiliary hydraulic flow: 80 L/min
- Overall length: approx. 4.8-5.0 m (189-197 in)
- Length to fork heel: approx. 4.2-4.4 m (165-173 in)
- Overall width: approx. 1.85-2.0 m (73-79 in)
- Overall height: approx. 2.1-2.2 m (82-87 in)
- Wheelbase: approx. 2.35 m (92.5 in)
- Ground clearance: approx. 290-310 mm (11.4-12.2 in)
- Standard forks: 1,200 mm (47 in)
- Optional forks: 1,000-1,500 mm (39-59 in)
- Carriage width: approx. 1,200-1,500 mm
- Maximum fork height: approx. 6.0 m (19.7 ft)
- Maximum reach: approx. 3.0-3.2 m
- Free-lift: minimal (telehandler geometry)
- Turning radius: approx. 3.4-3.8 m
- Operating weight: approx. 5,000-5,300 kg (11,023-11,684 lb)
- Working weight with attachments: approx. 5,300-5,600 kg
250-Hour Service:
- Replace engine oil and filter
- Lubricate all grease points
- Clean radiator, oil cooler
- Inspect battery and connections
500-Hour Service:
- Replace fuel filters
- Inspect hydraulic return filter
- Check axle oil
- Inspect driveline joints
1,000-Hour Service:
- Replace hydraulic return filter
- Replace axle oil
- Inspect boom pads and slides
- Torque wheel fasteners
2,000-Hour Service:
- Replace hydraulic oil
- Replace coolant
- Full boom structural inspection
- Hydraulic pressure/flow testing
- Drivetrain inspection
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |