Hyster H3.00XM Specifications
The Hyster H3.00XM is an LPG-powered, counterbalanced
forklift truck manufactured from approximately 1998 to 2005. This sit-down rider
model is engineered for demanding indoor and outdoor material handling tasks
requiring a rated load capacity of 3000 kg. The machine is powered by the Mazda
M4 2.0G engine producing 30 kW at 2800 rpm, featuring electronic ignition and
4-cylinder configuration.
The H3.00XM offers robust performance with a single-speed Hyster Powershift
transmission matched with a torque converter, providing excellent tractive and
travel speed performance. The tilting steering column and fully adjustable, full
suspension seat allow each operator to select the most comfortable driving
position, and power steering promotes operator productivity. The full range of
Vista 2-stage limited and full free lift and 3-stage masts are designed for good
visibility and smooth, durable operation, with 2-stage masts having flush-faced
channels to reduce chance of load damage during operation.
The Hyster H3.00XM is a four-wheeled forklift with a load capacity of 3000 kg or
6614 lb at a 500 mm or 19.7 in load centre. The nominal load at the centre of
gravity is 3 t. Its design prioritises stability and manoeuvrability in
demanding environments. The machine is fitted with pneumatic-shaped tyres as
standard. The tyre configuration is 2x2, indicating two wheels on the front
drive axle and two wheels on the rear steer axle.
The transmission type is W (powershift) with a single-speed Hyster Powershift
transmission matched with a torque converter providing excellent tractive and
travel speed performance with ratios of 3.12:1 with Mazda engine. The unladen
weight of the machine is 4497 kg or 9914 lb.
Weight distribution with load places 6732 kg or 14841 lb on the front axle and
675 kg or 1488 lb on the rear axle. Without load, weight distribution shifts to
1723 kg or 3799 lb on the front axle and 2774 kg or 6116 lb on the rear axle.
Basic Technical Data: The forklift is powered by the
Mazda M4 2.0G engine producing 30 kW or 40.2 hp at 2800 rpm governed speed
according to ISO 1585. The engine displacement is 2000 cc with 4 cylinders.
Alternative diesel configurations utilize Perkins engines producing 43 kW or 58
hp at 2600 rpm. The Mazda electronic ignition engine provides reliable
performance for LPG operation.
Lubrication: The engine lubrication system is a forced-feed type, employing a
gear pump to circulate oil throughout the engine block and cylinder head,
ensuring all moving components are adequately lubricated for reduced friction
and prolonged engine life. The system includes a full-flow oil filter to remove
contaminants. The hydraulic system features a 30.4 litre fluid capacity with
double gear main pump and full-time, full-flow, 10 micron return line filter.
Cooling: Engine temperature is regulated by a liquid cooling system. This system
comprises a radiator, a water pump, a thermostat, and a cooling fan. The water
pump circulates coolant through the engine jackets to absorb heat, which is then
dissipated as it passes through the radiator core.
Transmission: The Hyster H3.00XM is equipped with a
single-speed Hyster Powershift transmission with drive control via torque
converter. The transmission provides excellent tractive and travel speed
performance with ratios of 3.12:1 when matched with the Mazda engine. Auction
listings indicate automatic transmission for similar models.
Travel Speed: The forklift achieves a laden travel speed of 18.8 km/h or 11.7
mph and an unladen speed of 20.3 km/h or 12.6 mph.
Axles: The front axle is a rigid, drive axle that carries the majority of the
load, while the rear axle is a steer axle designed to oscillate, allowing all
wheels to maintain ground contact on uneven surfaces. The wheelbase measures
1625 mm or 64.0 in. The track width front is 972 mm to 1107 mm or 38.3 in to
43.6 in depending on configuration, and rear track width is 967 mm or 38.1 in.
Auction listings indicate 2 driving wheels and 2 steering wheels configuration.
Brakes: The service brake system is hydraulic, providing reliable and controlled
stopping power. Brakes have 310 mm or 12.2 in drum diameter and 405 cm2 or 62.8
in2 lining area, and are self-energising and self-adjusting. The parking brake
is mechanical.
The electrical system operates on a 12V architecture.
The system includes the Mazda electronic ignition for reliable engine operation.
The tilting steering column and fully adjustable, full suspension seat allow
each operator to select the most comfortable driving position. Power steering
promotes operator productivity.
Wheel Drive: The Hyster H3.00XM features a 2-wheel
drive configuration, with the front wheels providing the tractive effort (2x/2
configuration).
Wheels: The forklift uses a 2x/2 wheel configuration, meaning two wheels on the
front axle and two on the rear. The front wheels are the driven wheels.
Tires: This model is fitted with pneumatic-shaped tyres as standard. The front
tyre size is 28x9-15. The rear tyre size is 6.50x10. Some units are equipped
with solid rubber tyres. Superelastic tyres are available as an option.
Steering: The steering system is power steering with tilting steering column,
promoting operator productivity. The tilting steering column allows operators to
select the most comfortable driving position. The minimum outside turning radius
is 2300 mm or 90.6 in. The length from centre drive axle to face of forks is 480
mm or 18.9 in.
The hydraulic system is designed for efficient lifting
and tilting operations with 30.4 litre or 8.0 gal fluid capacity, double gear
main pump, and full-time, full-flow, 10 micron return line filter. It operates
at a working pressure for attachments of 155 bar or 2248 psi. The pump delivers
an oil flow for attachments of 67 L/min or 17.7 gpm.
The Hyster H3.00XM can be equipped with a full range of
Vista 2-stage limited and full free lift and 3-stage masts designed for good
visibility and smooth, durable operation. Specifications for a standard mast
include a lowered height of 2195 mm or 86.4 in. The mast has a free lift of 100
mm or 3.9 in. The standard lift height is 3160 mm or 124.4 in.
At full lift, the mast extends to 3905 mm or 153.7 in. The fork carriage is
CLASS 3A according to DIN 15173. The fork carriage width is 1070 mm or 42.1 in.
Standard fork dimensions are 45 mm or 1.77 in thick, 100 mm or 3.94 in wide, and
1200 mm or 47.2 in long. The load distance from centre drive axle to fork face
is 480 mm or 18.9 in. The mast and fork carriage can tilt forward by 6 degrees
and backward by 5 degrees.
Load Capacity: 6,614 lb (3000 kg)
Load Centre: 19.7 in (500 mm)
Lift speed with load is 0.46 m/s or 90.6 fpm, and
without load is 0.53 m/s or 104.3 fpm. Lowering speed with load is 0.50 m/s or
98.4 fpm, and without load is 0.42 m/s or 82.7 fpm. Drawbar pull with load, 60
minute rating is 13400 N or 3012 lbf, and without load is 13100 N or 2945 lbf.
Maximum drawbar pull with load, 5 minute rating
is 15900 N or 3575 lbf, and without load is 13700 N or 3080 lbf.
Gradeability with load, 30 minute rating is 19% and without load is 21%.
Maximum gradeability with load, 5 minute rating is 23% and without load
is 21%.
The overall length including forks is 3870 mm or 152.4
in, while the length to face of forks is 2670 mm or 105.1 in. The overall width
is 1340 mm or 52.8 in. The construction height is 2195 mm or 86.4 in. The height
of the overhead guard is 2178 mm or 85.7 in. The seat height is 1055 mm or 41.5
in, and the towing coupling height is 380 mm or 15.0 in.
Ground clearance under mast with load is 130 mm or 5.1 in, and at centre of
wheelbase is 175 mm or 6.9 in. The aisle width for pallets 1000 mm by 1200 mm
wide is 3980 mm or 156.7 in, and for pallets 800 mm by 1200 mm long is 3780 mm
or 148.8 in. The outer turning radius is 2300 mm or 90.6 in. The service weight
without load is 4497 kg or 9914 lb.
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |