Hyster S50CT Specifications
The Hyster S50CT is a versatile, rider-seated forklift
built to handle loads up to 2268 kg (5000 lb) with a 610 mm (24 in) load centre.
Powered by a 2.4 L, 4-cylinder PSI engine operating on LPG, it delivers 33 kW
(44 hp) at 2600 rpm and torque of 160 Nm (118 lb-ft) at 1200 rpm. The truck is
distinguished by its sturdy construction, reliable powershift transmission with
single pedal control, and a focus on operator safety and efficiency with
features like hydrostatic power steering, a 3-function hydraulic control valve
with optional integral sideshifter, and the Hyster Stability System (HSS).
Fitted with cushion tyres, it is well-suited for improved indoor surfaces. With
a laden travel speed of 18.2 km/h (11.3 mph) and a gradeability of 30 percent,
it provides efficient performance in distribution, manufacturing, and
warehousing applications. The Hyster S50CT incorporates advanced features
including the Operator Presence System (OPS), single pedal inch brake, and a 300
mm (12 in) steering wheel with spinner knob for enhanced maneuverability.
Manufacturer: HYSTER
Model: S50CT
Power Source: LPG (Gas LP)
Operator Type: Sit-Down Rider
Load Capacity / Rated Load: 2268 kg (5000 lb)
Load Centre: 610 mm (24 in)
Load Distance, Centre of Drive Axle to Fork: 388 mm (15.3 in)
Wheelbase: 1450 mm (57.1 in)
Service Weight: 3596 kg (7928 lb)
Axle Loadings, Laden Front/Rear: 5243 kg (11559 lb) / 621 kg (1369 lb)
Axle Loadings, Unladen Front/Rear: 1413 kg (3115 lb) / 2183 kg (4812 lb)
Tyres: Cushion
Engine Manufacturer/Type: PSI 2.4L, 4-cylinder
Engine Power: 33 kW (44 hp) at 2600 rpm according to ISO 1585
Rated Speed: 2600 rpm
Rated Torque: 160 Nm (118 lb-ft) at 1200 rpm
Number of Cylinders: 4
Displacement: 2351 cc to 2343 cc (143 cu.in to 143 cu.in)
Engine Lubrication: Wet sump
Engine Cooling: Liquid-cooled
Transmission Type: Powershift, electronically
controlled
Transmission Speed Forward / Reverse: 1 / 1
Travel Speed, Laden/Unladen: 18.2 km/h (11.3 mph) / 18.4 km/h (11.4 mph)
Drive Axle: Front (2 driven wheels)
Steer Axle: Rear with power steering
Service Brake: Hydraulic, foot-operated
Parking Brake: Mechanical, hand-operated
Drivetrain Features: Single pedal inch brake, forward/reverse direction lever,
neutral start switch
Voltage: 12 V
Battery Type: Maintenance-free
Cold Cranking Amps: 475 CCA
Starting System: Electric starter
Alternator: Standard equipment
Frame Construction: Fully welded heavy gauge frame with
integral tie downs
Wheel Drive (WD): 2-wheel drive (front)
Wheels, Number Front/Rear: 2 / 2 (total 4)
Tyre Size-Front: 21x7x15 (cushion) ; pneumatic-shaped solid non-marking optional
Tyre Size-Rear: 16x5x10.5 (cushion) ; pneumatic-shaped solid non-marking
optional
Overall Width: 1068 mm (42.0 in)
Steering Type: Hydrostatic power steering
Steering Control: Hydraulic; adjustable tilt steer column allows operators to
easily obtain a comfortable driving position; 300 mm (12 in) diameter steering
wheel with wheel spinner knob.
Relief Pressure for Attachments: 15.9 MPa (2306 psi).
Hydraulic Controls: Lever or joystick.
Hydraulic Tank Capacity (drain & refill): 29.9 L (7.9 gal).
Hydraulic System Features: Full-flow filtration; 3-function (1 auxiliary)
hydraulic control valve standard; optional integral sideshifter available for
precise load positioning; optional 38.5 in wide integral sideshifter.
Mast Type: 2-Stage limited free-lift (LFL) standard;
optional 3-Stage full free-lift (FFL) available with heights up to 4325 mm (170
in). Upright Construction: VISTA mast design for excellent visibility.
Tilt of Mast/Carriage Forward/Backward: 5 degrees / 5 degrees
Height, Mast Lowered: 2035 mm to 2160 mm (81 in)
Free Lift (with LBR): 823 mm (32 in)
Free Lift (without LBR): 1540 mm (60 in)
Lift Height: 4325 mm (170 in)
Height, Mast Extended with Load Backrest: 5537 mm (218 in)
Height, Mast Extended without Load Backrest: 4820 mm (190 in)
Fork Dimensions (thickness/width/length): 40x100x1067 mm (1.6x3.9x42 in)
Fork Carriage Width: 977 mm (38.5 in)
Fork Spread-Maximum Outer Edge: 852 mm (33.5 in)
Fork Spread-Minimum Inner Edge: 158 mm (6.2 in)
Load Capacity: 5,000 lb (2,268 kg)
Load Centre: 24 in (600 mm)
Lift Speed (2-Stage LFL), Laden/Unladen: 0.63 m/s (124
ft/min) / 0.65 m/s (128 ft/min)
Lift Speed (3-Stage FFL), Laden/Unladen: 0.59 m/s (116 ft/min) / 0.61 m/s (120
ft/min)
Lowering Speed (3-Stage FFL), Laden/Unladen: 0.49 m/s (96 ft/min) / 0.42 m/s (83
ft/min)
Drawbar Pull at 1.0 mph, Laden/Unladen: 13700 N (3020 lb) / 7600 N (1676 lb)
Gradeability, Laden/Unladen at 1.0 mph: 25 percent / 22 percent
Maximum Gradeability, Laden/Unladen: 30 percent / 22 percent
Wheelbase: 1450 mm (57.1 in)
Height of Overhead Guard: 2136 mm (85 in)
Step Height: 345 mm (13.6 in)
Coupling Height: 309 mm (12.2 in)
Truck Length to Face of Forks: 2341 mm (92.2 in)
Overall Width: 1068 mm (42.0 in)
Ground Clearance, Laden under Mast: 87 mm (3.4 in)
Ground Clearance, Centre of Wheelbase, Unladen: 116 mm (4.6 in)
Aisle Width, Right Angle Stack (Add Length of Load): 2450 mm (96.5 in)
Equal Aisle, 90-Degree Intersecting Aisle (with pallet 42"x48"): 1930 mm (76.0
in)
Turning Radius, Minimum Outside: 2062 mm (81.2 in)
Internal Turning Radius: 75 mm (3.0 in)
Service Weight: 3596 kg (7928 lb)
Axle Loadings, Laden Front/Rear: 5243 kg (11559 lb) / 621 kg (1369 lb)
Axle Loadings, Unladen Front/Rear: 1413 kg (3115 lb) / 2183 kg (4812 lb)
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |