Cat P5000 Specifications
The Caterpillar P5000 is a 5,000 lb capacity pneumatic
tire forklift engineered for versatile material handling applications in indoor
and outdoor environments. Powered by a Nissan K25 engine operating on gasoline
or LP gas, this model combines reliable performance with operational efficiency.
The truck features a single-speed powershift transmission for smooth directional
changes and a hydraulic system delivering 2,625 psi for attachment
compatibility.
With an 88 in outside turning radius and
gradeability reaching 37.8 percent loaded, the P5000 provides capable
performance in warehouses, distribution centers, construction sites, and
lumber yards. The design incorporates robust construction for durable
daily use, straightforward controls for operator convenience, and easy
access to service points for simplified maintenance. The P5000 was
manufactured by Caterpillar as part of their P-series forklift line,
offering various mast configurations including simplex, duplex, and
triplex options with lift heights ranging from 131 to 188 in.
Engine manufacturer and model: Nissan K25
Engine type: 4-cylinder, 4-cycle, liquid-cooled, overhead valve
Engine continuous output SAE gross: 63.0 HP (47.0 kW) at 2,700 rpm
Engine rated speed: 2,700 rpm
Engine maximum torque SAE gross: 139 lb-ft (188 Nm) at 1,600 rpm
Engine torque speed: 1,600 rpm
Engine displacement: 152 cu.in (2,490 cc)
Number of cylinders: 4
Fuel system: Carbureted for gasoline/LPG operation
Fuel type: Gasoline or LP gas
Lubrication system: Full-pressure lubrication with oil filter
Cooling system: Liquid-cooled with pressurized radiator
Transmission type: Powershift with torque converter
Transmission specification: Single-speed powershift
Number of speeds forward: 1
Number of speeds reverse: 1
Travel speed with load: 10.5 mph (17.0 km/h)
Travel speed without load: 11.5 mph (18.5 km/h)
Drive axle type: Heavy-duty drive axle with differential
Steer axle type: Heavy-duty steer axle with kingpin design
Service brake type: Hydraulic, foot-operated
Parking brake type: Mechanical, hand-operated
System voltage: 12V
Battery capacity: 850 CCA
Alternator output: 50 A
Alternator type: Belt-driven
Starter motor: 12V
Frame construction: Robust chassis, all-welded
heavy-duty plate steel
Counterweight construction: Cast iron
Wheel configuration: 2x driven front / 2 rear
Number of wheels front: 2
Number of wheels rear: 2
Tire type: Pneumatic
Tire size front (standard): 7.00 x 12-12PR
Tire size rear: 6.00 x 9-10PR
Steering type: Hydrostatic power steering
Steering control: Steering wheel with hydraulic control unit
Steering pump type: Gear pump, integral with hydraulic system
Hydraulic system type: Open center
Maximum operating pressure: 2,625 psi (185 bar)
Hydraulic pump type: Gear pump
Hydraulic control valves: Lever-operated
Number of lift cylinders: 2
Number of tilt cylinders: 2
Lift cylinder type: Double-acting
Tilt cylinder type: Double-acting
Mast type standard: Two-stage (simplex)
Mast type optional: Triplex three-stage mast available
Maximum fork height (standard two-stage mast): 131.0 in (3,340 mm)
Maximum lift height (triplex mast): 188 in (4,775 mm)
Free fork height (standard mast): 5.7 in (145 mm)
Mast height lowered (standard): 84.6 in (2,140 mm)
Overall height with mast raised (standard): 180 in (4,550 mm)
Overall height with mast raised (triplex): 188 in (4,775 mm)
Mast tilt forward: 6 degrees
Mast tilt backward: 10 degrees
Full free lift: Available on triplex configurations
Fork carriage: Tilt carriage
Forks thickness: 1.6 in (40 mm)
Forks width: 4.0 in (100 mm)
Forks length: 42 in (1,070 mm) standard
Fork length: 48 in available on some configurations
Fork size: 1.6 x 4.0 x 42 in (40 x 100 x 1,070 mm)
Fork spacing minimum out-to-out: 8.7 in (220 mm)
Fork spacing maximum out-to-out: 39.4 in (1,000 mm)
Load distance from axle to fork face: 17.9 in (455 mm)
Rated load capacity: 5,000 lb (2,500 kg)
Load centre distance: 19.7 in (500 mm)
Lifting speed with load: 125 fpm (630 mm/s)
Lifting speed without load: 130 fpm (650 mm/s)
Lowering speed with load: 98 fpm (500 mm/s)
Lowering speed without load: 98 fpm (500 mm/s)
Drawbar pull loaded (60 minute rating): 4,175 lb (18,600 N)
Drawbar pull loaded maximum (5 minute rating): 4,750 lb (21,100 N)
Gradeability at 1 mph with load: 33.0 percent
Gradeability maximum loaded: 37.8 percent
Gradeability maximum empty: 16.4 percent
Overall length to fork face: 100 in (2,540 mm)
Overall length with forks: 144 in (3,658 mm) shipping length
Overall width with standard tires: 45.5 in (1,150 mm)
Overall width with optional duals: 64.5 in (1,640 mm)
Overall width: 45.3 in (1,150 mm) on some configurations
Wheelbase: 63.0 in (1,600 mm)
Tread width front (standard tires): 38.0 in (960 mm)
Tread width front (optional duals): 47.5 in (1,205 mm)
Tread width rear: 38.5 in (980 mm)
Ground clearance at lowest point at mast: 4.6 in (117 mm)
Ground clearance at center of wheelbase: 6.3 in (160 mm)
Height to top of overhead guard: 83.0 in (2,100 mm)
Height seat: 38.0 in (959 mm)
Minimum outside turning radius: 88 in (2,230 mm)
Minimum aisle-90° stack-zero clearance without load: 105.9 in (2,685 mm)
Operating weight: 7,900 lb (3,583 kg)
Axle loading with rated load front: 12,000 lb (5,400 kg)
Axle loading with rated load rear: 1,470 lb (670 kg)
Axle loading without load front: 3,175 lb (1,440 kg)
Axle loading without load rear: 4,775 lb (2,170 kg)
Engine Oil Change Interval: 250 hours
Engine Oil Filter Change Interval: 250 hours
Transmission Fluid Change Interval: 1,000 hours
Hydraulic Oil Change Interval: 2,000 hours
Hydraulic Filter Change Interval: 500 hours
Coolant Change Interval: 2,000 hours or 2 years
Differential Oil Change Interval: 1,000 hours
Air Cleaner Element Replacement: When indicator shows restriction
Fuel Filter Replacement: 500 hours
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |