Cat P6000 Specifications
The Caterpillar P6000 is a 6,000 lb capacity pneumatic
tire forklift powered by gasoline or LPG, engineered for versatile material
handling applications in both indoor and outdoor environments. Powered by a
Nissan K25 engine delivering 63 horsepower, this model combines reliable
performance with the durability expected from Caterpillar equipment. The unit
features a Powershift transmission, hydraulic service brakes, and a two-stage
mast configuration. With its compact dimensions and maneuverability, the P6000
represents Caterpillar's commitment to producing efficient, high-performance
material handling equipment capable of operating in various industrial settings.
Engine Model: Nissan K25
Engine Type: Four-cycle, water-cooled, spark-ignited
Fuel Type: Gasoline or LPG
Number of Cylinders: 4
Displacement: 152 cu.in (2,491 cc)
Continuous Output (SAE gross): 63.0 HP (47.0 kW) at 2,700 rpm
Maximum Torque (SAE gross): 139 lb-ft (188 Nm) at 1,600 rpm
Rated Speed: 2,700 rpm
Torque Speed: 1,600 rpm
Lubrication Type: Forced circulation with gear pump
Oil Filter: Full-flow cartridge type
Recommended Oil Viscosity: SAE 10W-30 or 15W-40
Cooling Type: Water-cooled, forced circulation
Water Pump: Centrifugal type with belt drive
Radiator: Corrugated fin type with pressure cap
Thermostat: Wax pellet type
Cooling Fan: Suction type
Recommended Coolant: Ethylene glycol based antifreeze mixture
Transmission Type: Powershift
Number of Speeds: 1 forward / 1 reverse
Torque Converter: Single-stage, single-phase
Control: Hydraulic with column-mounted shift lever
Travel Speed (with load): 10.5 mph (17.0 km/h)
Travel Speed (without load): 11.0 mph (18.0 km/h)
Drive Axle (Front): Full-floating type
Steer Axle (Rear): Mounted with trunnion-type articulation
Service Brakes: Foot-operated, hydraulic
Service Brake Type: Hydraulic
Parking Brake: Hand-operated, mechanical
Parking Brake Type: Mechanical hand lever
System Voltage: 12V
Battery: Lead-acid
Alternator: High-output
Starter Motor: High-torque
Frame Construction: Welded steel plate
Drive Configuration: 4x2 (front wheel drive)
Counterweight: Integrated into chassis design
Front Wheel Type: Disc wheel
Rear Wheel Type: Disc wheel
Front Tire Size (standard): 28 x 9-15-12PR
Rear Tire Size (standard): 6.50 x 10-10PR
Tire Type: Pneumatic
Steering Type: Power steering
Steering Control: Hydraulic with steering wheel
Steering Pump: Gear type, engine driven
Steering Cylinder: Double-acting hydraulic
Hydraulic System Type: Open center
Hydraulic Pump Type: Gear pump
Relief Pressure (for attachments at main): 2,625 psi (185 bar)
Hydraulic Controls: Cowl-mounted with ergonomic design
Mast Type: Standard two-stage mast
Maximum Fork Height (standard): 130.0 in (3,320 mm)
Maximum Fork Height (optional three-stage mast): 186 in (4,724 mm)
Free Fork Height: 5.9 in (150 mm)
Lowered Mast Height: 85.5 in (2,165 mm)
Lowered Mast Height (optional three-stage): 84.0 in (2,134 mm)
Extended Mast Height: 180.0 in (4,550 mm)
Mast Tilt Forward: 6°
Mast Tilt Backward: 10°
Fork Carriage Width: 39.4 in (1,000 mm)
Maximum Fork Spread: 39.4 in (1,000 mm)
Fork Thickness: 1.8 in (45 mm)
Fork Width: 5.0 in (125 mm)
Fork Length: 42.0 in (1,070 mm)
Fork Spacing (minimum out-to-out): 9.8 in (250 mm)
Fork Spacing (maximum out-to-out): 39.4 in (1,000 mm)
Rated Load Capacity: 6,000 lb (3,000 kg)
Load Center Distance: 24 in (500 mm)
Lift Speed (with load): 99 ft/min (500 mm/s)
Lift Speed (without load): 100 ft/min (520 mm/s)
Lowering Speed (with load): 98 ft/min (500 mm/s)
Lowering Speed (without load): 98 ft/min (500 mm/s)
Drawbar Pull (loaded, 60 min rating): 4,150 lb (18,400 N)
Drawbar Pull (loaded maximum, 5 min rating): 4,725 lb (21,000 N)
Gradeability (loaded at 1 mph): 27.0%
Gradeability (maximum loaded): 30.9%
Gradeability (maximum empty): 17.3%
Overall Length to Fork Face: 107 in (2,720 mm)
Overall Width (standard): 50.0 in (1,275 mm)
Overall Width (with optional duals): 67.5 in (1,715 mm)
Wheelbase: 67.0 in (1,700 mm)
Front Tread Width (standard tires): 42.0 in (1,060 mm)
Front Tread Width (optional duals): 47.5 in (1,205 mm)
Rear Tread Width: 38.5 in (980 mm)
Ground Clearance (lowest point at mast): 5.4 in (135 mm)
Ground Clearance (center of wheelbase): 7.0 in (178 mm)
Height to Top of Overhead Guard: 84.0 in (2,125 mm)
Seat Height: 40.0 in (1,015 mm)
Minimum Outside Turning Radius: 94.0 in (2,380 mm)
Minimum Aisle Width (90° stack, zero clearance, w/o load): 113.3 in (2,870 mm)
Empty Weight: 9,300 lb (4,250 kg)
Axle Load with Rated Load (front): 14,300 lb (6,500 kg)
Axle Load with Rated Load (rear): 1,670 lb (760 kg)
Axle Load without Load (front): 3,825 lb (1,730 kg)
Axle Load without Load (rear): 5,500 lb (2,525 kg)
Engine Oil Change Interval: 250 hours
Engine Oil Filter Change Interval: 250 hours
Transmission Fluid Change Interval: 1,000 hours
Hydraulic Oil Change Interval: 2,000 hours
Hydraulic Filter Change Interval: 500 hours
Coolant Change Interval: 2,000 hours or 2 years
Differential Oil Change Interval: 1,000 hours
Air Cleaner Element Replacement: When indicator shows restriction
Fuel Filter Replacement: 500 hours
Recommended Engine Oil: API SL or higher for LPG/gasoline service
Recommended Transmission Fluid: Caterpillar TO-4 or equivalent
Recommended Hydraulic Fluid: ISO VG 46 anti-wear hydraulic oil.
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |