Cat 2C5000 Specifications
The Cat 2C5000 is a 5,000 lb (2,500 kg) capacity
cushion tire forklift powered by a gasoline or LPG engine. This four-wheel,
sit-down counterbalanced truck is designed for indoor warehouse and industrial
applications where maneuverability on smooth surfaces is required. Power is
provided by a Nissan K25 engine, generating 63 hp (46.9 kW), mated to a
single-speed powershift transmission enabling travel speeds up to 11.5 mph (18.0
km/h) and lift speeds reaching 130 fpm (660 mm/s). The truck features a standard
two-stage mast providing 131.5 in (3,340 mm) of maximum fork height with 5.1 in
(130 mm) of free lift. The 2C5000 incorporates cushion tires suitable for
warehouse environments, with 21 x 7 x 15 front tires and 16 x 6 x 10.5 rear
tires. Additional features include hydraulic power steering and a load backrest
extension.
Engine model: Nissan K25
Power source: Gasoline / LP Gas
Continuous output SAE gross: 63 hp (46.9 kW)
Rated speed: 2,700 rpm
Maximum torque SAE gross: 139 lb-ft (188 Nm)
Torque speed: 1,600 rpm
Number of cylinders: 4
Displacement: 152 cu in (2.5 L)
Lubrication system type: forced circulation
Oil pump type: gear
Cooling system type: water-cooled, pressurized
Radiator type: fin and tube
Transmission type: Powershift
Number of speeds forward / reverse: 1/1
Transmission control: single lever
Travel speed loaded: 11.0 mph (17.5 km/h)
Travel speed empty: 11.5 mph (18.0 km/h)
Front axle type: drive axle with reduction differential
Rear axle type: steering axle
Service brake type: foot-operated, hydraulic
Parking brake type: hand-operated, mechanical
System voltage: 12V
Alternator type: Belt-driven
Starter motor: 12V
Wheels (x=driven): number front / rear: 2x / 2
Tire type: cushion
Tire size: front, standard: 21 x 7 x 15
Tire size: rear: 16 x 6 x 10.5
Steering system: hydraulic power steering
Steering control: steering wheel
Steering pump type: gear
Hydraulic pump type: direct-drive gear pump
Hydraulic flow: 23.5 gpm (89.1 L/min)
Relief pressure for attachments at main: 2,250 psi (155 bar)
Relief pressure for main lift circuit: 2,250 psi (155 bar)
Control valve type: monoblock
Number of hydraulic control valve sections: 2
Mast type (standard): two-stage
Lift with standard two-stage mast: max fork height: 131.5 in (3,340 mm)
Lift with standard two-stage mast: free fork height: 5.1 in (130 mm)
Mast type (optional): three-stage
Mast type (optional): four-stage
Tilt forward / backward: 5° / 9°
Mast carriage class: Class II
Load backrest extension: 48 in (1,220 mm) high
Height with lowered mast: 83.0 in (2,110 mm)
Height with extended mast: 179.5 in (4,560 mm)
Fork thickness x width x length: 1.6x3.9x42 in (40x100x1,070 mm)
Fork spacing out-to-out min / max: 7.9 / 36.0 in (200 / 920 mm)
Capacity: at rated load center: 5,000 lb (2,500 kg)
Capacity: at load center-distance: 24 in (500 mm)
Lift speed loaded / empty: 125 fpm / 130 fpm (640 mm/s
/ 660 mm/s)
Lowering speed loaded / empty: 99 fpm / 99 fpm (500 mm/s / 500 mm/s)
Drawbar pull: loaded (60 min. rating): 4,620 lb (20,500 N)
Drawbar pull: loaded maximum (5 min. rating): 5,840 lb (26,000 N)
Gradeability: loaded at 1 mph: 37%
Gradeability: maximum loaded / empty: 43% / 20%
Length to fork face: 92.5 in (2,340 mm)
Overall width with standard tires: 42.0 in (1,064 mm)
Overall width with optional duals: 44.5 in (1,128 mm)
Tread width: front, standard tires: 35.0 in (886 mm)
Tread width: front, optional duals: 37.5 in (950 mm)
Tread width: rear tires: 35.0 in (890 mm)
Wheelbase: 55.0 in (1,400 mm)
Ground clearance at lowest point at mast: 3.1 in (80 mm)
Ground clearance at center of wheel base: 5.4 in (139 mm)
Height to top of overhead guard: 81.5 in (2,070 mm)
Height: seat height: 42.4 in (1,080 mm)
Minimum outside turning radius: 79.5 in (2,020 mm)
Load moment constant: 16.3 in (414 mm)
Minimum aisle-90° stack-zero clearance without load: 96.0 in (2,440 mm)
Empty weight: 8,110 lb (3,680 kg)
Axle load with rated load front / rear: 2,800 lb / 5,340 lb (1,270 kg / 2,420
kg)
Axle load without load front / rear: 11,470 lb (5,200 kg) total
Engine oil change interval: 250 hours under normal
conditions
Transmission oil change interval: 1,000 hours
Hydraulic oil change interval: 2,000 hours
Coolant change interval: 2,000 hours or 2 years
Brake fluid replacement interval: 1,000 hours or 1 year
Air filter element replacement interval: as indicated by restriction indicator
Drive axle oil change interval: 1,000 hours
Steering system oil change interval: 1,000 hours
Valve lash adjustment interval: 500 hours
Ignition system service interval: 250 hours
Engine idle speed adjustment: 650-700 rpm
Brake pedal free play adjustment: 0.4-0.8 in (10-20 mm)
Parking brake lever travel adjustment: 5-7 notches
Hydraulic control lever free play: 0.04-0.12 in (1-3 mm)
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |