Hyster H50XT Specifications
The Hyster H50XT is a versatile, rider-seated forklift
built to handle loads up to 2268 kg (5000 lb) with a 610 mm (24 in) load centre.
Powered by a 2.4 L, 4-cylinder PSI engine operating on LPG, it delivers 46 kW
(62 hp) at 2700 rpm and torque of 168 Nm (124 lb-ft) at 1600 rpm. The truck is
distinguished by its sturdy construction, reliable electronic powershift
transmission with Monotrol pedal directional control, and a focus on operator
safety and efficiency with features like hydrostatic power steering, a VISTA
PLUS mast, and an adjustable steer column.
Fitted with pneumatic tyres, it is well-suited for both indoor and outdoor
improved surfaces. With a laden travel speed of 18.4 km/h (11.4 mph) and a
gradeability of 30.2 percent, it provides efficient performance in distribution,
manufacturing, and warehousing applications. The Hyster H50XT incorporates
advanced features including the Hyster Stability System (HSS), cowl-mounted
hydraulic control levers, aluminum core anti-clog radiator, and an ergonomic
operator compartment with integrated dashboard display.
Manufacturer: HYSTER
Model: H50XT
Power Source: LPG / Dual Fuel
Operator Type: Sit-Down Rider
Load Capacity / Rated Load: 2268 kg (5000 lb)
Load Centre: 610 mm (24 in)
Load Distance, Centre of Drive Axle to Fork: 471 mm (18.5 in)
Wheelbase: 1623 mm (63.9 in)
Service Weight: 4040 kg to 4042 kg (8910 lb to 8915 lb)
Axle Loadings, Laden Front/Rear: 5453 kg (12024 lb) / 853 kg (1881 lb)
Axle Loadings, Unladen Front/Rear: 1676 kg (3695 lb) / 2363 kg (5210 lb)
Step Height: 415 mm (16.3 in)
Tyres: Pneumatic
Engine Manufacturer/Type: PSI 2.4L, 4-cylinder
Engine Power: 46 kW (62 hp) at 2700 rpm according to ISO 1585
Rated Speed: 2700 rpm
Rated Torque: 168 Nm (124 lb-ft) at 1600 rpm
Number of Cylinders: 4
Displacement: 2351 cc to 2343 cc (143 cu.in to 143 cu.in)
Engine Lubrication: Wet sump
Engine Cooling: Liquid-cooled with aluminum core, anti-clog radiator
Fuel Tank (LPG/Dual Fuel): 69 L (18.2 gal)
Transmission Type: Electronic powershift transmission
Transmission Speed Forward / Reverse: 1 / 1
Travel Speed, Laden/Unladen: 18.4 km/h (11.4 mph) / 18.6 km/h (11.6 mph)
Drive Axle: Front (2 driven wheels)
Steer Axle: Rear with durable construction for low maintenance
Service Brake: Hydraulic, foot-operated
Parking Brake: Mechanical, hand-operated
Drivetrain Features: Monotrol pedal directional control, electronic inching,
hydraulic inching available, neutral start switch.
Voltage: 12 V
Battery Type: Maintenance Free
Cold Cranking Amps: 475 CCA
Electrical Features: Integrated dashboard display ; IP66 sealed electrical
connectors enhance durability and simplify maintenance; CANbus communication
network; Hall-effect sensors; Pacesetter VSM on-board computer monitors fluid
levels and powertrain status, reducing daily service checks and preventing major
repairs; state-of-the-art on-board diagnostics reduce repair time and minimize
expensive parts swapping.
Frame Construction: Fully welded heavy gauge frame with
integral tie downs
Wheel Drive (WD): 2-wheel drive (front)
Wheels, Number Front/Rear: 2x/2 (total 4)
Tyre Size-Front: 7.00x12-12 (pneumatic)
Tyre Size-Rear: 6.00x9 (pneumatic)
Overall Width (Standard Tread): 1162 mm (45.7 in)
Overall Width (Wide Tread): 1322 mm (52 in)
Steering Type: Hydrostatic power steering
Steering Control: Hydraulic; adjustable tilt steer column allows operators to
easily obtain a comfortable driving position.
Auxiliary Hydraulic Pressure Relief for Attachments:
17.6 MPa (2550 psi).
Hydraulic Tank Capacity (drain & refill): 42 L (11.1 gal).
Hydraulic System Features: Full-flow filtration; smart placement of control
valve and hydraulic lines away from heat sources reduces operating temperature,
extending life of seals and hoses; use of leak-free O-ring face seal (ORFS)
fittings reduces leaks for enhanced reliability.
Hydraulic Controls: Cowl-mounted mechanical hydraulic control levers; optional
TouchPoint E-hydraulic mini-levers available.
Mast Type: 2-Stage limited free-lift (LFL) VISTA PLUS
mast standard; optional 3-Stage full free lift (FFL) available. Upright
Construction: High strength design improves capacity retention at high lifts;
excellent visibility and rigidity.
Tilt of Mast/Carriage Forward/Backward: 6 degrees / 6 degrees
Height, Mast Lowered: 2170 mm to 2184 mm (86 in)
Free Lift (Standard LFL): 140 mm (5 in)
Free Lift (Optional FFL): 1490 mm (58 in)
Lift Height: 3292 mm to 3300 mm (129 in to 130 in)
Height, Mast Extended with Load Backrest: 3715 mm to 3734 mm (147 in)
Height, Mast Extended without Load Backrest: 3904 mm (154 in)
Maximum Fork Height: 3300 mm (130 in)
Forks (thickness/width/length): 40x100x1067 mm (1.6x3.9x42 in)
Fork Carriage Width: 1067 mm (42 in)
Fork Carriage Type: Hook-type carriage with 1219 mm (48 in) tall load backrest
Load Capacity: 5,000 lb (2,268 kg)
Load Centre: 24 in (610 mm)
Lift Speed (2-Stage LFL), Laden: 0.65 m/s (128 ft/min)
Lift Speed (2-Stage LFL), Unladen: 0.68 m/s (134 ft/min)
Lift Speed (3-Stage FFL), Laden: 0.61 m/s (120 ft/min)
Lift Speed (3-Stage FFL), Unladen: 0.64 m/s (126 ft/min)
Lowering Speed (2-Stage LFL), Laden: 0.58 m/s (114 ft/min)
Lowering Speed (2-Stage LFL), Unladen: 0.50 m/s (98 ft/min)
Lowering Speed (3-Stage FFL), Laden: 0.58 m/s (114 ft/min)
Lowering Speed (3-Stage FFL), Unladen: 0.50 m/s (98 ft/min)
Max Drawbar Pull, Laden/Unladen: 22300 N (4916 lb) / 10060 N (2217 lb)
Drawbar Pull at 1.0 mph, Laden/Unladen: 18840 N (4154 lb) / 10060 N (2217 lb)
Gradeability, Laden/Unladen at 1.0 mph: 30.2 percent / 27.6 percent
Wheelbase: 1623 mm (63.9 in)
Height of Overhead Guard (Standard): 2228 mm to 2230 mm (87.7 in to 87.8 in)
Height of Overhead Guard (Optional): 2128 mm (83.8 in)
Step Height: 415 mm (16.3 in)
Truck Length to Face of Forks: 2589 mm to 2590 mm (101.9 in)
Overall Width (Standard Tread): 1162 mm (45.7 in)
Overall Width (Wide Tread): 1322 mm (52 in)
Ground Clearance, Lowest Point Unladen: 84 mm (3.3 in)
Ground Clearance, Lowest Point Laden (subtract 6 mm): 78 mm (3.1 in)
Ground Clearance, Centre of Wheelbase Unladen: 190 mm to 191 mm (7.5 in)
Aisle Width, Right Angle Stack (Add Length of Load): 2707 mm to 2710 mm (106.6
in)
Equal Aisle, 90-Degree Intersecting Aisle: 2056 mm (80.9 in)
Turning Radius, Minimum Outside: 2236 mm to 2240 mm (88 in)
Service Weight: 4040 kg to 4042 kg (8910 lb to 8915 lb)
Axle Loadings, Laden Front/Rear: 5453 kg (12024 lb) / 853 kg (1881 lb)
Axle Loadings, Unladen Front/Rear: 1676 kg (3695 lb) / 2363 kg (5210 lb)
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |