Cat 2P5000 Specifications
The Cat 2P5000 is a 5,000 lb (2,500 kg) capacity
pneumatic tire forklift powered by a gasoline or LP gas engine. This four-wheel,
sit-down counterbalanced truck is designed for indoor and outdoor material
handling applications. Power is provided by a Nissan K25 engine mated to a
single-speed powershift transmission, enabling travel speeds up to 11.0 mph
(18.5 km/h) and lift speeds reaching 130 fpm (650 mm/s). The truck features
hydraulic power steering, a robust chassis with a 63.0 in (1,600 mm) wheelbase,
and a standard two-stage mast providing 131 in (3,330 mm) of maximum fork
height. Service and maintenance information is thoroughly documented in
manufacturer publications covering all major systems.
Engine model: Nissan K25
Power source: gasoline / LP gas
Continuous output S.A.E. gross: 61 hp (45.8 kW)
Rated speed: 2,700 rpm
Maximum torque S.A.E. gross: 129 lb-ft (186 Nm)
Torque speed: 1,600 rpm
Number of cylinders: 4
Displacement: 152 cu in (2.5 L)
Lubrication system type: forced circulation
Oil pump type: gear
Engine oil capacity including filter: 5.8 qt (5.5 L)
Cooling system type: water-cooled, pressurized
Coolant capacity: 2.6 gal (9.8 L)
Radiator type: fin and tube
Transmission
Transmission type: Powershift
Transmission model: TCM
Number of speeds forward / reverse: 1/1
Transmission control: single lever
Travel speed
Travel speed loaded: 10.0 mph (17.0 km/h)
Travel speed empty: 11.0 mph (18.5 km/h)
Axles
Front axle type: semi-floating, full-floating
Rear axle type: steering axle with kingpin
Axle load with rated load front / rear (est.): 11,570 lb / 1,420 lb (5,450 kg /
670 kg)
Axle load without load front / rear (est.): 3,190 lb / 4,800 lb (1,440 kg /
2,180 kg)
Drive axle ratio: 5.286:1
Brakes
Service brake type: foot-operated, hydraulic, self-adjusting
Service brake design: drum type on all wheels
Parking brake type: hand-operated, mechanical, drum type on transmission
System voltage: 12 V
Battery capacity: 75 Ah
Alternator output: 50 A
Starter motor output: 1.4 kW
Wheels and tires
Wheels (x=driven): number front / rear: 2x / 2
Tire type: pneumatic
Tire size: front, standard: 7.0x12-12PR
Tire size: front, optional duals: 7.0 x 12-12PR
Tire size: rear: 6.00 x 9-10PR
Tread width: front, standard tires: 38.0 in (970 mm)
Tread width: front, optional duals: 47.5 in (1,210 mm)
Tread width: rear tires: 38.5 in (980 mm)
Wheel base: 63.0 in (1,600 mm)
Wheel disc mounting: 6 lug
Steering system: hydraulic power steering
Steering control: steering wheel
Steering pump type: gear
Steering pump flow: 3.2 gpm (12.1 L/min)
Steering wheel turns stop to stop: 4.8
Hydraulic pump type: gear
Hydraulic pump flow at rated speed: 12.5 gpm (47.3 L/min)
Relief pressure for attachments at main: 2,625 psi (181 bar)
Relief pressure for main lift circuit: 2,625 psi (181 bar)
Control valve type: monoblock
Number of hydraulic control valve sections: 2
| Service Refill Capacities |
Fuel tank capacity: 14.5 gal (55 L)
Engine oil including filter: 5.8 qt (5.5 L)
Transmission oil capacity: 2.6 gal (9.8 L)
Drive axle oil capacity: 1.8 qt (1.7 L)
Hydraulic system total capacity: 9.5 gal (36 L)
Hydraulic tank capacity: 7.5 gal (28 L)
Cooling system capacity: 2.6 gal (9.8 L)
Mast type (standard): two-stage
Lift with standard two-stage mast: maximum fork height: 131 in (3,330 mm)
Lift with standard two-stage mast: free fork height: 5.7 in (140 mm)
Mast type (optional): three-stage
Lift with three-stage mast: maximum fork height: 188 in (4,780 mm)
Lift with three-stage mast: free fork height: 55.7 in (1,415 mm)
Mast type (optional): two-stage full free
Lift with two-stage full free mast: maximum fork height: 131 in (3,330 mm)
Lift with two-stage full free mast: free fork height: 55.7 in (1,415 mm)
Tilt forward / backward: 6° / 10°
Mast carriage class: Class II
Mast carriage width: 44.0 in (1,118 mm)
Capacity: at rated load center: 5,000 lb (2,500 kg)
Capacity: at load center - distance: 24 in (500 mm)
Lift speed loaded / empty: 125 fpm / 130 fpm (630 mm/s
/ 650 mm/s)
Lowering speed loaded / empty: 98 fpm / 98 fpm (500 mm/s / 500 mm/s)
Drawbar pull: loaded (60 min. rating): 3,705 lb (16,481 N)
Drawbar pull: loaded maximum (5 min. rating): 4,345 lb (19,326 N)
Gradeability: loaded at 1 mph (1.6 km/h): 28.7%
Gradeability: maximum loaded / empty: 39.8% / 16.5%
Length to fork face: 100 in (2,550 mm)
Overall length including forks: 142 in (3,610 mm)
Overall width with standard tires: 45.5 in (1,160 mm)
Overall width with optional duals: 64.5 in (1,640 mm)
Height to top of overhead guard: 83 in (2,105 mm)
Height: seat height: 45.8 in (1,160 mm)
Height with lowered mast: 84.5 in (2,150 mm)
Height with extended mast: 180 in (4,570 mm)
Fork thickness x width x length: 1.6 x 4 x 42 in (40 x 100 x 1,070 mm)
Fork spacing out-to-out minimum / maximum: 8.7 / 39.4 in (220 / 1,000 mm)
Minimum outside turning radius: 87.8 in (2,230 mm)
Load moment constant: 18.1 in (459 mm)
Ground clearance at lowest point at mast: 4.6 in (117 mm)
Ground clearance at center of wheel base: 6.6 in (167 mm)
Ground clearance under frame: 5.5 in (140 mm)
Minimum aisle - 90° stack - zero clearance without load: 105.9 in (2,689 mm)
Minimum aisle - 90° stack - 40 x 48 in pallet length: 126.4 in (3,210 mm)
Empty weight: 7,990 lb (3,620 kg)
Empty weight with optional duals: 8,340 lb (3,780 kg)
Empty weight with three-stage mast: 8,420 lb (3,820 kg)
Operating weight with rated load: 12,990 lb (5,890 kg)
Engine oil change interval: 250 hours under normal
conditions
Transmission oil change interval: 1,000 hours
Hydraulic oil change interval: 2,000 hours
Coolant change interval: 2,000 hours or 2 years
Brake fluid replacement interval: 1,000 hours or 1 year
Air filter element replacement interval: 500 hours or as indicated by
restriction indicator
Drive axle oil change interval: 1,000 hours
Steering system oil change interval: 1,000 hours
Valve lash adjustment interval: 500 hours
Ignition system service interval: 250 hours
Engine idle speed adjustment: 650-700 rpm
Brake pedal free play adjustment: 0.4-0.8 in (10-20 mm)
Parking brake lever travel adjustment: 5-7 notches
Hydraulic control lever free play: 0.04-0.12 in (1-3 mm).
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |