Cat P5000D Specifications
The Caterpillar P5000D is a 5,000 lb capacity
diesel-powered pneumatic tire forklift engineered for versatile indoor and
outdoor material handling applications. Powered by a Mitsubishi S4S diesel
engine producing 59 hp, this model delivers reliable performance in environments
such as construction sites, lumber yards, and agricultural settings. The P5000D
features a single-speed powershift transmission for smooth directional changes,
hydrostatic power steering for precise maneuverability, and pneumatic tires for
enhanced traction on uneven surfaces.
The operator compartment includes ergonomic
controls, excellent visibility through the mast channels, and
comprehensive instrumentation for system monitoring. With its 88.0 in
turning radius and 45.5 in overall width, this forklift navigates
confined spaces efficiently while maintaining stability through its 63.0
in wheelbase. The hydraulic system delivers 120 fpm lift speeds at 2,625
psi operating pressure for responsive load handling.
Engine Model: Mitsubishi S4S
Power Type: Diesel
Continuous Output SAE Gross: 59.0 hp (44.1 kW) @ 2,300 rpm
Maximum Torque SAE Gross: 135 lb-ft (183 Nm) @ 1,800 rpm
Number of Cylinders: 4
Displacement: 203 cu.in (3.3 L)
Fuel System: Direct injection diesel
Engine Design: Four-cylinder configuration for smooth power delivery
Lubrication System Type: Pressure lubrication with full-flow filtration
Oil Capacity: 10.5 L (11.1 US qt)
Recommended Oil: API service class CF or higher, SAE 15W-40
Cooling System Type: Pressurized, water-cooled with centrifugal pump
Coolant Capacity: 12.0 L (12.7 US qt)
Transmission Type: Powershift transmission
Drive Control Type: Powershift with torque converter
Number of Speeds Forward / Reverse: 1/1
Transmission Design: Single-speed powershift with hydraulic modulation
Travel Speed (with load): 10.0 mph (16.5 km/h)
Travel Speed (without load): 11.0 mph (17.5 km/h)
Drive Axle (Front): Heavy-duty design with planetary reduction
Steer Axle (Rear): Robust construction with oscillating capability
Service Brake Type: Foot-operated, hydraulic
Parking Brake Type: Hand-operated, mechanical
System Voltage: 12V
Battery: Heavy-duty commercial type
Alternator: High-output
Starting System: Electric starter with glow plug pre-heat for cold starts
Wheel Configuration (x = driven): 2x front / 2 rear
Number of Wheels Front / Rear: 2 / 2
Tire Type: Pneumatic
Tire Size (front, standard): 7.00 x 12-12 PR
Tire Size (rear): 6.00 x 9-10 PR
Steering Type: Hydrostatic power steering
Steering System: Fully hydraulic power steering
Steering Control: Precise movement with reduced operator effort
Hydraulic System Type: Open center
Hydraulic Pump Type: Gear pump
Hydraulic System Design: High-efficiency, direct-drive
System Relief Pressure (main): 2,625 psi (185 bar)
Control Valves: Precision metering for smooth operation
Hydraulic Fluid Capacity: 12.0 US gal (45.4 L)
| Service Refill Capacities |
Fuel Tank: 15.9 US gal (60.0 L)
Engine Oil (with filter): 11.1 US qt (10.5 L)
Cooling System: 12.7 US qt (12.0 L)
Hydraulic System: 12.0 US gal (45.4 L)
Transmission: 4.0 US qt (3.8 L)
Drive Axle: 3.0 US qt (2.8 L)
Mast Type Available: Two-stage (simplex) or three-stage
(triplex) with free lift
Overall Height with Mast Raised (two-stage): 180.0 in (4,550 mm)
Mast Lowered Height (two-stage): 84.6 in (2,140 mm)
Lift Height (standard, two-stage): 131.0 in (3,340 mm)
Lift Height (three-stage, optional): 162.0 to 188.0 in (4,115 to 4,775 mm)
Free Lift Height (two-stage): 5.7 in (145 mm)
Mast Tilt (forwards / backwards): 6° / 10°
Mast Construction: Rolled channel design with full roller carriage
Mast Features: Side shift and fork positioner available
Fork Carriage Type: DIN 15173 Class compatible
Fork Carriage Width: 39.4 in (1,000 mm)
Fork Dimensions (thickness x width x length): 1.6x4.0x42.0 in (40x100x1,070 mm)
Fork Spread (out-to-out, min / max): 8.7 in / 39.4 in (220 mm / 1,000 mm)
Rated Capacity: 5,000 lb (2,500 kg)
Load Center Distance: 24.0 in (500 mm)
Load Moment Constant: 17.9 in (455 mm)
Lift Speed (with rated load): 120 fpm (620 mm/s)
Lift Speed (without load): 125 fpm (630 mm/s)
Lowering Speed (loaded / empty): 98 fpm / 98 fpm (500 mm/s / 500 mm/s)
Drawbar Pull (loaded, 60 min rating): 3,950 lb (17,600 N)
Drawbar Pull (loaded, 5 min rating): 4,425 lb (19,600 N)
Gradeability (loaded at 1 mph / 1.6 km/h): 30.0%
Gradeability (maximum, loaded): 34.2%
Gradeability (maximum, empty): 16.4%
Overall Length: 100.0 in (2,540 mm)
Length to Fork Face: 100.0 in (2,540 mm)
Overall Width (with standard tires): 45.5 in (1,150 mm)
Overall Width (with optional duals): 64.5 in (1,640 mm)
Wheelbase: 63.0 in (1,600 mm)
Track Width (front, standard tires): 38.0 in (960 mm)
Track Width (front, optional duals): 47.5 in (1,205 mm)
Track Width (rear): 38.5 in (980 mm)
Ground Clearance (at lowest point at mast): 4.6 in (117 mm)
Ground Clearance (at center of wheelbase): 6.3 in (160 mm)
Load Back Rest Height: 48 in (1,220 mm)
Height to Top of Overhead Guard: 83.0 in (2,100 mm)
Seat Height: 38.0 in (959 mm)
Minimum Outside Turning Radius: 88.0 in (2,230 mm)
Right Angle Stack Aisle (zero clearance without load): 105.9 in (2,685 mm)
Right Angle Stack Aisle (with 48 x 48 in load): 110.0 in (2,794 mm)
Empty Operating Weight: 8,100 lb (3,700 kg)
Axle Loading (w/rated load, front / rear): 12,100 lb / 1,620 lb (5,500 kg / 740
kg)
Axle Loading (w/o load, front / rear): 3,250 lb / 4,925 lb (1,480 kg / 2,230 kg)
Engine Oil and Filter Change: Every 250 hours or 3
months
Engine Air Filter Element: As indicated by restriction gauge (check daily)
Fuel Filter Replacement: Every 500 hours or 6 months
Hydraulic Oil Filter Replacement: Every 1,000 hours
Hydraulic Oil Change: Every 2,000 hours
Transmission Fluid and Filter Change: Every 1,000 hours
Drive Axle Oil Change: Every 1,000 hours
Coolant Change: Every 2,000 hours or 2 years
Chassis Greasing: Every 50 hours or weekly
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |