Hyster S50FT Specifications
The Hyster S50FT is a versatile, rider-seated forklift
built to handle loads up to 2268 kg (5000 lb) with a 610 mm (24 in) load centre.
Powered by a 2.4 L, 4-cylinder PSI engine operating on LPG, it delivers 44 kW
(59 hp) at 2700 rpm and torque of 164 Nm (121 lb-ft) at 2000 rpm. An optional
Kubota 2.5L dual-fuel engine is also available, producing 44 kW (59 hp) at 2500
rpm with torque of 177 Nm (131 lb-ft) at 1000 rpm.
The truck is distinguished by its sturdy construction, reliable electronic
powershift transmission, and a focus on operator safety and efficiency with
features like hydrostatic power steering, a 2-stage VISTA PLUS mast, and the
Hyster Stability System (HSS). Fitted with cushion tyres, it is well-suited for
improved indoor surfaces.
With a laden travel speed of 17.8 km/h to 18.2 km/h (11.1 mph to 11.3 mph) and a
gradeability of 33 percent, it provides efficient performance in distribution,
manufacturing, and warehousing applications. The Hyster S50FT incorporates
advanced features including a 3-function hydraulic control valve, single pedal
inch brake, rubber floor mat, integral tie downs, and an ergonomic operator
compartment with an infinitely adjustable steer column.
Manufacturer: HYSTER
Model: S50FT
Power Source: LPG / Dual Fuel
Operator Type: Sit-Down Rider
Load Capacity / Rated Load: 2268 kg (5000 lb)
Load Centre: 610 mm (24 in)
Load Distance, Centre of Drive Axle to Fork: 390 mm (15.4 in)
Wheelbase: 1430 mm to 1450 mm (56.3 in to 60.0 in)
Service Weight: 3895 kg to 3910 kg (8587 lb to 8620 lb)
Axle Loadings, Laden Front/Rear: 5396 kg (11897 lb) / 767 kg (1690 lb)
Axle Loadings, Unladen Front/Rear: 1543 kg (3402 lb) / 2352 kg (5185 lb)
Tyres: Cushion
LPG Engine (PSI
2.4L)
Engine Manufacturer/Type: PSI 2.4L, 4-cylinder
Engine Power: 44 kW (59 hp) at 2700 rpm according to ISO 1585
Rated Speed: 2700 rpm
Rated Torque: 164 Nm (121 lb-ft) at 2000 rpm
Number of Cylinders: 4
Displacement: 2351 cc to 2401 cc (143 cu.in to 146.5 cu.in)
Engine Lubrication: Wet sump
Engine Cooling: Liquid-cooled
Fuel Tank (LPG): 40.5 L (10.7 gal)
Dual Fuel Engine (Kubota 2.5L)
Engine Manufacturer/Type: Kubota 2.5L, 4-cylinder dual fuel
Engine Power: 44 kW (59 hp) at 2500 rpm
Rated Speed: 2500 rpm
Rated Torque: 177 Nm (131 lb-ft) at 1000 rpm
Number of Cylinders: 4
Displacement: 2491 cc (152 cu.in)
Engine Lubrication: Wet sump
Engine Cooling: Liquid-cooled
Transmission Type: Electronic powershift transmission
Transmission Speed Forward / Reverse: 1 / 1
Travel Speed, Laden/Unladen: 17.8 km/h to 18.2 km/h (11.1 mph to 11.3 mph) /
18.0 km/h to 18.4 km/h (11.2 mph to 11.4 mph)
Drive Axle: Front (2 driven wheels)
Steer Axle: Rear
Service Brake: Hydraulic, foot-operated
Parking Brake: Mechanical, hand-operated
Drivetrain Features: Single pedal inch brake, forward/reverse direction lever,
neutral start switch
Electrical System
Voltage: 12 V
Battery Type: Maintenance Free
Cold Cranking Amps: 475 CCA
Starting System: Electric starter
Alternator: Standard equipment
Frame Construction: Fully welded heavy gauge frame with
integral tie downs
Wheel Drive (WD): 2-wheel drive (front)
Wheels, Number Front/Rear: 2 / 2 (total 4)
Tyre Size-Front: 21x7x15 (cushion)
Tyre Size-Rear: 16x5x10.5 (cushion)
Overall Width (Standard Tread): 1067 mm to 1068 mm (42.0 in)
Overall Width (Wide Tread): 1242 mm (48.9 in)
Steering Type: Hydrostatic power steering
Steering Control: Hydraulic; infinitely adjustable tilt steer column allows
operators to easily obtain a comfortable driving position
Steering Angle: 90 degrees in both directions
Auxiliary Hydraulic Pressure Relief for Attachments:
15.4 MPa to 15.5 MPa (2250 psi)
Hydraulic System Features: Full-flow filtration; 3-function (1 auxiliary)
hydraulic control valve standard
Hydraulic Controls: Cowl-mounted mechanical hydraulic control levers
Hydraulic Tank Capacity (drain & refill): 36.1 L (9.5 gal)
Mast Type: 2-Stage limited free-lift (LFL) VISTA PLUS
mast standard; optional 2-Stage full free-lift (FFL) and 3-Stage full free-lift
(FFL) available. Upright Construction: VISTA PLUS mast design for excellent
visibility.
Tilt of Mast/Carriage Forward/Backward: 5 degrees / 5 degrees
Height, Mast Lowered: 2135 mm to 2160 mm (84 in to 85 in)
Free Lift (Standard LFL): 140 mm (5 in)
Free Lift (Optional FFL): 1575 mm (62 in)
Lift Height: 3292 mm to 3320 mm (129 in to 131 in)
Height, Mast Extended with Load Backrest: 4515 mm (178 in)
Height, Mast Extended without Load Backrest: 3840 mm (151 in)
Maximum Fork Height: 3300 mm (130 in)
Fork Dimensions (thickness/width/length): 40x100x1067 mm (1.6x3.9x42 in)
Fork Carriage Width: 980 mm (38.5 in)
Fork Spread-Maximum Outer Edge: 974 mm (38.3 in)
Load Capacity: 5,000 lb (2,268 kg)
Load Centre: 24 in (610 mm)
Lift Speed (2-Stage LFL), Laden: 0.62-0.63 m/s (122-124
ft/min)
Lift Speed (2-Stage LFL), Unladen: 0.64-0.65 m/s (126-128 ft/min)
Lift Speed (Opt 2-Stage FFL), Laden: 0.54 m/s (106 ft/min)
Lift Speed (Opt 2-Stage FFL), Unladen: 0.57 m/s (112 ft/min)
Lift Speed (3-Stage FFL), Laden: 0.58-0.59 m/s (114-116 ft/min)
Lift Speed (3-Stage FFL), Unladen: 0.61 m/s (120 ft/min)
Lowering Speed (2-Stage LFL), Laden: 0.58 m/s (114 ft/min)
Lowering Speed (2-Stage LFL), Unladen: 0.50 m/s (98 ft/min)
Lowering Speed (Opt 2-Stage FFL), Laden: 0.50 m/s (98 ft/min)
Lowering Speed (Opt 2-Stage FFL), Unladen: 0.42 m/s (83 ft/min)
Lowering Speed (3-Stage FFL), Laden: 0.54 m/s (106 ft/min)
Lowering Speed (3-Stage FFL), Unladen: 0.47 m/s (93 ft/min)
Drawbar Pull at 1.0 mph, Laden/Unladen: 20040 N (4418 lb) / 7600 N (1676 lb)
Maximum Drawbar Pull: 23960 N (5282 lb)
Gradeability, Laden/Unladen at 1.0 mph: 30 percent / 21 percent
Maximum Gradeability: 33 percent
Wheelbase: 1450 mm (60.0 in)
Height of Overhead Guard (Std): 2128-2136 mm (84-85 in)
Height of Overhead Guard (Opt): 2061 mm (82 in)
Coupling Height: 309 mm (12.2 in)
Step Height: 350 mm (13.8 in)
Truck Length to Face of Forks: 2280-2341 mm (89.8-92.2 in)
Overall Width (Standard Tread): 1067 mm to 1070 mm (42.0 in)
Ground Clearance, Lowest Point Unladen: 91-130 mm (3.6-5.1 in)
Ground Clearance, Lowest Point Laden (subtract 6 mm): 85-124 mm (3.3-4.9 in)
Ground Clearance, Centre of Wheelbase Unladen: 125-190 mm (4.9-7.5 in)
Aisle Width, Right Angle Stack (Add Length of Load): 2390-2450 mm (94.1-96.5 in)
Equal Aisle, 90-Degree Intersecting Aisle (with pallet 42"x48"): 1897 mm (74.7
in)
Turning Radius, Minimum Outside: 2000-2062 mm (78.7-81.2 in)
Service Weight: 3895 kg to 3910 kg (8587 lb to 8620 lb)
Axle Loadings, Laden Front/Rear: 5396 kg (11897 lb) / 767 kg (1690 lb)
Axle Loadings, Unladen Front/Rear: 1543 kg (3402 lb) / 2352 kg (5185 lb)
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |