Cat 2C3000 Specifications
The Caterpillar 2C3000 is a 3,000 lb capacity cushion
tire forklift designed for reliable indoor material handling in warehouses and
distribution centers. Powered by a Nissan K21 dual-fuel engine configured for
gasoline or LPG operation, this model delivers 50 hp for consistent performance
in pallet staging, order picking, and general warehousing applications. The
2C3000 features a powershift transmission for smooth directional changes,
hydrostatic power steering for precise maneuverability in confined aisles, and a
single-piece cast drive axle for enhanced durability.
The operator compartment includes ergonomic
hydraulic levers, a fully adjustable seat, and comprehensive
instrumentation for system monitoring. With its compact 70.0 in turning
radius and 38.0 in overall width, this forklift navigates narrow aisles
efficiently while maintaining stability through its 47.0 in wheelbase.
Standard features include an inching pedal for precise load positioning
and six load rollers for mast stability.
Engine Model: Nissan K21
Power Type: Gasoline / LP Gas (dual-fuel)
Continuous Output SAE Gross: 50 hp (37.4 kW) @ 2,400 rpm
Maximum Torque SAE Gross: 111 lb-ft (151 Nm) @ 2,000 rpm
Number of Cylinders: 4
Displacement: 126 cu.in (2.1 L)
Fuel System: Dual-fuel carburetion with LPG converter
Engine Protection System: Monitors vital fluids and maintenance requirements
Lubrication System Type: Pressure lubrication with full-flow filtration
Oil Capacity (with filter change): 5.5 L (5.8 US qt)
Recommended Oil: API service class SF or higher, SAE 10W-30
Cooling System Type: Pressurized, water-cooled with centrifugal pump
Coolant Capacity: 9.0 L (9.5 US qt)
Transmission Type: Powershift transmission
Drive Control Type: Single-speed powershift with torque converter
Number of Speeds Forward / Reverse: 1/1
Travel Speed (with load): 9.5 mph (15.5 km/h)
Travel Speed (without load): 10.0 mph (16.5 km/h)
Drive Axle (Front): One-piece, single-cast drive axle reducing potential leak
points and absorbing shock
Steer Axle (Rear): Heavy-duty construction with oscillating capability
Service Brake Type: Foot-operated, hydraulic
Parking Brake Type: Hand-operated, mechanical
System Voltage: 12 V
Battery: Maintenance-free commercial type
Alternator: High-output
Starting System: Electric starter with ignition system
Wheel Configuration (x = driven): 2x front / 2 rear
Number of Wheels Front / Rear: 2 / 2
Tire Type: Cushion
Tire Size (front, standard): 18 x 6 x 12
Tire Size (rear): 14 x 5 x 10
Steering Type: Hydrostatic power steering with tilt steering column and memory
function
Steering System: Fully hydrostatic using hydraulic oil flow
Steering Control: Precise movement with reduced operator effort
Hydraulic Pump Type: Gear pump
Hydraulic Flow: 19.0 gpm (72.0 L/min)
System Relief Pressure (main): 2,250 psi (155 bar)
Hydraulic Fluid Capacity: 10.5 US gal (40.0 L)
| Service Refill Capacities |
Fuel Tank (LPG): 8.0 US gal (30.3 L)
Engine Oil (with filter): 5.8 US qt (5.5 L)
Cooling System: 9.5 US qt (9.0 L)
Hydraulic System: 10.5 US gal (40.0 L)
Transmission: 3.5 US qt (3.3 L)
Drive Axle: 2.0 US qt (1.9 L)
Mast Type Available: Two-stage (simplex) or three-stage
(triplex) with free lift
Mast Lowered Height (two-stage): 83.0 in (2,110 mm)
Lift Height (standard, two-stage): 131.0 in (3,330 mm)
Free Lift Height (two-stage): 4.5 in (115 mm)
Overall Height with Mast Raised (two-stage): 179.0 in (4,550 mm)
Mast Tilt (forwards / backwards): 5° / 10°
Mast Channels: Specially-shaped channels with large mast rollers for extended
life
Load Rollers: Six load rollers for greater contact and stability
Fork Carriage Type: DIN 15173 Class compatible
Fork Dimensions (thickness x width x length): 1.4x3.9x42.0 in (35x100x1,070 mm)
Fork Spread (out-to-out, minimum / maximum): 7.9 in / 32.3 in (200 mm / 820 mm)
Fork Carriage Width: 32.3 in (820 mm)
Rated Capacity: 3,000 lb (1,500 kg)
Load Center Distance: 24.0 in (500 mm)
Load Moment Constant: 15.3 in (388 mm)
Lift Speed (with rated load): 120 fpm (620 mm/s)
Lift Speed (without load): 125 fpm (630 mm/s)
Lowering Speed (loaded / empty): 99 fpm / 99 fpm (500 mm/s / 500 mm/s)
Drawbar Pull (loaded, 60 min rating): 3,750 lb (16,700 N)
Drawbar Pull (loaded, 5 min rating): 3,950 lb (17,600 N)
Gradeability (loaded at 1 mph / 1.6 km/h): 45%
Gradeability (maximum, loaded): 50%
Gradeability (maximum, empty): 23%
Overall Length: 82.0 in (2,080 mm)
Length to Fork Face: 82.0 in (2,080 mm)
Overall Width (with standard tires): 38.0 in (970 mm)
Overall Width (with optional duals): 39.5 in (997 mm)
Wheelbase: 47.0 in (1,190 mm)
Track Width (front, standard tires): 32.0 in (818 mm)
Track Width (front, optional duals): 33.5 in (845 mm)
Track Width (rear): 32.5 in (820 mm)
Ground Clearance (at lowest point at mast): 3.0 in (75 mm)
Ground Clearance (at center of wheelbase): 4.5 in (116 mm)
Height to Top of Overhead Guard: 81.0 in (2,055 mm)
Height (with lowered mast): 83.0 in (2,110 mm)
Height (with extended mast): 179.0 in (4,550 mm)
Seat Height: 42.0 in (1,070 mm)
Minimum Outside Turning Radius: 70.0 in (1,775 mm)
Right Angle Stack Aisle (zero clearance without load): 85.0 in (2,165 mm)
Empty Operating Weight: 6,040 lb (2,740 kg)
Axle Loading (with rated load, front / rear): 7,870 lb / 2,350 lb (3,570 kg /
1,070 kg)
Axle Loading (without load, front / rear): 3,720 lb / 2,350 lb (1,690 kg / 1,070
kg)
Engine Oil and Filter Change: Every 250 hours or 3
months
Engine Air Filter Element: As indicated by restriction gauge (check daily)
Fuel Filter Replacement: Every 500 hours or 6 months
Hydraulic Oil Filter Replacement: Every 1,000 hours
Hydraulic Oil Change: Every 2,000 hours
Transmission Fluid and Filter Change: Every 1,000 hours
Drive Axle Oil Change: Every 1,000 hours
Coolant Change: Every 2,000 hours or 2 years
Chassis Greasing: Every 50 hours or weekly
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |