Cat P3000 Specifications
The Caterpillar P3000 is a 3,000 lb capacity pneumatic
tire forklift powered by gasoline or LPG, engineered for versatile material
handling applications in both indoor and outdoor environments. Powered by a
Nissan K21 engine delivering 54.5 horsepower, this model combines reliable
performance with the durability expected from Caterpillar equipment. The unit
features a Powershift transmission, hydraulic service brakes, and a two-stage
mast configuration. With its compact design and maneuverability, the P3000
represents Caterpillar's commitment to producing efficient, high-performance
material handling equipment capable of operating in various industrial settings.
Engine Model: Nissan K21
Engine Type: Four-cycle, water-cooled, spark-ignited
Fuel Type: Gasoline or LPG
Number of Cylinders: 4
Displacement: 126 cu.in (2,066 cc)
Continuous Output (SAE gross): 54.5 HP (41.0 kW) at 2,875 rpm
Maximum Torque (SAE gross): 110 lb-ft (155 Nm) at 1,600 rpm
Rated Speed: 2,875 rpm
Torque Speed: 1,600 rpm
Lubrication Type: Forced circulation with gear pump
Oil Filter: Full-flow cartridge type
Recommended Oil Viscosity: SAE 10W-30 or 15W-40
Cooling Type: Water-cooled, forced circulation
Water Pump: Centrifugal type with belt drive
Radiator: Corrugated fin type with pressure cap
Thermostat: Wax pellet type
Cooling Fan: Suction type
Recommended Coolant: Ethylene glycol based antifreeze mixture
Transmission Type: Powershift
Number of Speeds: 1 forward / 1 reverse
Torque Converter: Single-stage, single-phase
Control: Hydraulic with column-mounted shift lever
Travel Speed (with load): 11.0 mph (17.5 km/h)
Travel Speed (without load): 12.0 mph (19.0 km/h)
Drive Axle (Front): Full-floating type
Steer Axle (Rear): Mounted with trunnion-type articulation
Service Brakes: Foot-operated, hydraulic
Service Brake Type: Hydraulic
Parking Brake: Hand-operated, mechanical
Parking Brake Type: Mechanical hand lever
System Voltage: 12V
Battery: Lead-acid
Alternator: High-output
Starter Motor: High-torque
Frame Construction: Welded steel plate
Counterweight: Integrated into chassis design
Drive Configuration: 2x2 (front wheel drive)
Front Wheel Type: Disc wheel
Rear Wheel Type: Disc wheel
Number of Wheels: 2 front / 2 rear
Front Tire Size (standard): 6.50 x 10-10PR
Rear Tire Size (standard): 5.00 x 8-8PR
Tire Type: Pneumatic
Steering Type: Power steering
Steering Control: Hydraulic with steering wheel
Steering Pump: Gear type, engine driven
Steering Cylinder: Double-acting hydraulic
Hydraulic System Type: Open center
Hydraulic Pump Type: Gear pump
Relief Pressure (for attachments at main): 2,625 psi (185 bar)
Hydraulic Controls: Cowl-mounted with ergonomic design
Mast Type: Standard two-stage mast
Maximum Fork Height (standard): 130.0 in (3,320 mm)
Maximum Fork Height (alternate): 162 in (4,115 mm)
Free Fork Height: 4.5 in (115 mm)
Lowered Mast Height: 84.5 in (2,140 mm)
Extended Mast Height: 180.0 in (4,550 mm)
Mast Tilt Forward: 6°
Mast Tilt Backward: 10°
Fork Carriage Width: 36.2 in (920 mm)
Maximum Fork Spread: 36.2 in (920 mm)
Load Back Rest Height: 48 in (1200 mm)
Rated Load Capacity: 3,000 lb (1,500 kg)
Load Center Distance: 24 in (500 mm)
Lift Speed (with load): 120 ft/min (620 mm/s)
Lift Speed (without load): 125 ft/min (630 mm/s)
Lowering Speed (with load): 98 ft/min (500 mm/s)
Lowering Speed (without load): 98 ft/min (500 mm/s)
Drawbar Pull (loaded, 60 min rating): 3,575 lb (15,900 N)
Drawbar Pull (loaded maximum, 5 min rating): 4,125 lb (18,300 N)
Gradeability (loaded at 1 mph): 40.0%
Gradeability (maximum loaded): 40.1%
Gradeability (maximum empty): 18.4%
Overall Length to Fork Face: 89.0 in (2,260 mm)
Overall Width (standard): 42.0 in (1,065 mm)
Wheelbase: 55.0 in (1,400 mm)
Front Tread Width (standard tires): 35.0 in (885 mm)
Rear Tread Width: 35.5 in (901 mm)
Ground Clearance (lowest point at mast): 4.3 in (110 mm)
Ground Clearance (center of wheelbase): 5.9 in (150 mm)
Height to Top of Overhead Guard: 83.0 in (2,100 mm)
Seat Height: 38.0 in (959 mm)
Load Moment Constant: 15.7 in (400 mm)
Fork Thickness: 1.4 in (35 mm)
Fork Width: 3.9 in (100 mm)
Fork Length: 42.0 in (1,070 mm)
Fork Spacing (minimum out-to-out): 7.9 in (200 mm)
Fork Spacing (maximum out-to-out): 36.2 in (920 mm)
Minimum Outside Turning Radius: 77.0 in (1,950 mm)
Minimum Aisle Width (90° stack, zero clearance, w/o load): 96.5 in (2,460 mm)
Empty Weight: 5,600 lb (2,600 kg)
Axle Load with Rated Load (front): 7,900 lb (3,676 kg)
Axle Load with Rated Load (rear): 960 lb (440 kg)
Axle Load without Load (front): 2,430 lb (1,110 kg)
Axle Load without Load (rear): 3,076 lb (1,400 kg)
Engine Oil Change Interval: 250 hours
Engine Oil Filter Change Interval: 250 hours
Transmission Fluid Change Interval: 1,000 hours
Hydraulic Oil Change Interval: 2,000 hours
Hydraulic Filter Change Interval: 500 hours
Coolant Change Interval: 2,000 hours or 2 years
Differential Oil Change Interval: 1,000 hours
Air Cleaner Element Replacement: When indicator shows restriction
Fuel Filter Replacement: 500 hours
Grease Type: Lithium complex NLGI No. 2
Recommended Engine Oil: API SL or higher for LPG/gasoline service
Recommended Transmission Fluid: Caterpillar TO-4 or equivalent
Recommended Hydraulic Fluid: ISO VG 46 anti-wear hydraulic oil
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |