Bobcat TL30.70 Specifications
The Bobcat TL30.70 telehandler is a compact yet
powerful R-Series material-handling machine engineered to deliver lifting
versatility, excellent maneuverability, and robust reliability in construction,
agriculture, industrial yards, logistics environments, and rental applications.
With a rated lifting capacity of 3,000 kg (6,614 lb) and a maximum lift height
of approximately 7.0 meters (23 ft), the TL30.70 provides an optimal balance of
capacity, reach, stability, and compact dimensions suitable for pallet handling,
bale stacking, bulk loading, and precise placement tasks in confined or open
work environments.
Equipped with the Bobcat D34 turbocharged diesel engine, the TL30.70 offers
modern emissions compliance, efficient fuel consumption, and dependable torque
delivery at low engine speeds. The telehandler’s hydrostatic transmission
ensures smooth inching, stable load handling, and forward/reverse transitions
without mechanical shock.
The permanent 4WD system, combined with three
steering modes and a reinforced chassis, provides strong traction and
terrain adaptability. A spacious R-Series cab improves operator comfort
through excellent visibility, ergonomic controls, and enhanced HVAC
performance.
The TL30.70 uses Bobcat’s Power Quick-Tach system, supporting a wide
variety of attachments such as pallet forks, buckets, grapples, bale
spears, sweepers, and hydraulic tools. With its advanced hydraulic
system, stable boom geometry, robust structural design, and modern
operator-focused features, the TL30.70 delivers versatile performance
with low maintenance requirements.
The TL30.70 is powered by the Bobcat D34 turbocharged
diesel engine, designed for telehandler applications where consistent torque,
fuel economy, and reliability are essential. This engine is electronically
managed, emissions-compliant, and optimized for low-rpm performance during
repeated lift cycles, hydraulic tool operation, and travel.
Technical Data
- Engine type: 4-cylinder, 4-stroke, turbocharged diesel
- Displacement: 3.4 liters (207 cu.in)
- Power output: approx. 74-100 hp (55-75 kW), depending on market emissions
package
- Torque: approx. 350-450 Nm (258-332 lb-ft)
- Fuel system: high-pressure common rail
- Aspiration: turbocharged with intercooler
- Emissions: Stage V / Tier 4 Final
- Fuel type: Ultra-low sulfur diesel (ULSD)
- Idle speed: approx. 850 rpm
- Max governed speed: approx. 2,200-2,400 rpm
Lubrication System
- System type: pressurized wet-sump
- Oil capacity: approx. 10-12 L (10.5-12.7 qt)
- Recommended oil: SAE 15W-40 API CK-4 or better
- Filtration: full-flow spin-on oil filter
- Oil pressure: approx. 250-350 kPa (36-50 psi) under load
Cooling System
- Cooling type: liquid-cooled
- Coolant capacity: approx. 15-18 L (15.8-19 qt)
- Radiator: heavy-duty multi-row design
- Fan: hydraulic or mechanical
- Cooling system pressure: approx. 14-17 psi
- Thermostat opening: approx. 82°C (180°F)
The hydrostatic transmission provides precise control
during lifting, placing, and travel operations. Its smooth, infinitely variable
speed range allows stable operation in tight spaces or when maneuvering with
loads at height.
Transmission
- Transmission type: hydrostatic variable displacement
- Forward speed: approx. 30 km/h (18.6 mph)
- Reverse speed: similar to forward
- Creep mode: approx. 7-9 km/h (4-5.5 mph)
- Transmission oil type: hydrostatic drive oil
- Fluid capacity: approx. 10-15 L (10.5-16 qt)
Axles
- Drive configuration: permanent 4WD
- Axle design: planetary reduction hubs
- Front axle: rigid for stability
- Rear axle: oscillating with approx. 8-12° movement
- Axle lubrication: SAE 80W-90 or 85W-140
- Axle oil capacity: approx. 3-4 L (3.1-4.2 qt) per axle
Braking System
- Service brakes: hydraulic wet-disc, oil-immersed
- Parking brake: spring-applied, hydraulic-release
- Characteristics: fade-resistant, sealed against contamination, low maintenance
- Voltage: 12 V
- Alternator: approx. 100-120 A
- Battery: approx. 100-140 Ah
- Starter power: approx. 2.5-3.5 kW
- Wiring: sealed connectors, abrasion-protected conduit
- Control systems: ECU engine management, safety interlocks, hydraulic lockouts
- Display: digital multifunction operator screen
- Frame: welded structural steel chassis
- Drive system: permanent 4WD
- Standard tires: 12-16.5 industrial rough-terrain
- Ground clearance: approx. 300-320 mm (11.8-12.6 in)
- Undercarriage protection: steel skid plating
Optional tires:
- Agricultural tread
- Solid industrial
- Flotation
- Non-marking tires
- Steering type: hydrostatic
- Steering pump output: approx. 20-25 L/min (5.2-6.6 gpm)
- Turning radius (outside): approx. 3.4-3.8 m (11.2-12.5 ft)
- Rear axle: oscillating for improved terrain adaptability
Steering modes:
- Front-wheel steer
- Four-wheel steer
- Crab steer
The TL30.70 features a load-sense hydraulic system
optimized for stable and responsive boom operation, attachment running, and load
control.
- System type: load-sense
- Max hydraulic pressure: approx. 250-270 bar (3,600-3,900 psi)
- Pump type: engine-driven gear or gear/piston hybrid
- Auxiliary hydraulic flow: approx. 80 L/min (21.1 gpm)
- Hydraulic oil: ISO VG 32/46
- Hydraulic reservoir: approx. 60-80 L (63-84 qt)
- Cylinders: double-acting boom lift, extend, and tilt
- Auxiliary couplers: quick-attach connectors
- Filtration: return-line filter with restriction indicator
| Service Refill Capacities |
- Engine oil: 10-12 L
- Coolant: 15-18 L
- Transmission oil: 10-15 L
- Axle oil: 3-4 L per axle
- Hydraulic reservoir: 60-80 L
- Fuel tank: approx. 80-100 L (21-26 gal)
- Rated lift capacity: 3,000 kg (6,614 lb)
- Max lift height: approx. 7.0 m (23.0 ft)
- Max forward reach: approx. 3.4-3.6 m (11.2-11.8 ft)
- Lift capacity at max height: approx. 2,000-2,200 kg
- Lift capacity at max reach: approx. 900-1,200 kg
- Travel speed: 30 km/h (18.6 mph)
- Drawbar pull: approx. 30-38 kN (6,700-8,500 lbf)
- Boom breakout force: approx. 30-35 kN
- Bucket breakout force: approx. 40-45 kN
- Overall length: 4.9-5.1 m (193-201 in)
- Length to fork heel: 4.3-4.5 m (169-177 in)
- Overall width: 1.9-2.0 m (75-79 in)
- Overall height: 2.1-2.2 m (82-87 in)
- Wheelbase: approx. 2.35 m (92.5 in)
- Ground clearance: 300-320 mm
- Standard fork length: 1,200 mm (47 in)
- Optional forks: 1,000-1,500 mm (39-59 in)
- Carriage width: approx. 1,200-1,500 mm
- Maximum fork height: approx. 7.0 m
- Maximum reach: approx. 3.4-3.6 m
- Free-lift: minimal (telehandler-type boom)
- Turning radius: approx. 3.4-3.8 m
- Operating weight: approx. 5,400-5,800 kg (11,900-12,800 lb)
- Working weight with attachments: approx. 5,700-6,100 kg
250-Hour Service
- Change engine oil and filter
- Lubricate all grease points
- Clean radiator/coolers
- Inspect battery and wiring
500-Hour Service
- Replace fuel filters
- Inspect hydraulic return filter
- Check axle oil levels
- Inspect driveline components
1,000-Hour Service
- Replace hydraulic return filter
- Replace axle oil
- Inspect boom slides and wear pads
- Re-torque wheel fasteners
2,000-Hour Service
- Replace hydraulic oil
- Replace coolant
- Full boom structural inspection
- Hydraulic pressure/flow test
- Drivetrain and electrical inspection
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |