Bobcat TL35.70 Specifications
The Bobcat TL35.70 telehandler is a robust, reliable,
and highly versatile mid-range telescopic handler engineered to support
demanding construction, agricultural, industrial, and material-handling
environments. Positioned in the R-Series lineup above compact units while
remaining more maneuverable than high-capacity heavy telehandlers, the TL35.70
delivers an excellent combination of lift capacity, reach capability, operator
comfort, and all-around efficiency. With a rated lifting capacity of 3,500 kg
(7,716 lb) and a maximum lift height of approximately 7.0 m (23 ft), this
machine is suited for pallet handling, bulk loading, bale stacking,
lift-and-carry operations, attachment-based work, and precision placement in
confined or open job sites.
The TL35.70 is offered with two diesel engine configurations depending on market
and emissions requirements: the Perkins 1104D-44TA turbocharged diesel engine,
known for its mechanical reliability and field-proven durability, and the Bobcat
D34 turbocharged diesel engine, engineered for high torque, efficiency, and
compliance with modern emissions regulations including Stage V / Tier 4 Final.
These engines deliver strong low-rpm torque essential for telehandler operations
such as lifting at height, operating hydraulic attachments, and traveling under
load.
The hydrostatic transmission provides smooth and precise control, especially
valuable when inching into tight placement areas. The machine’s permanent 4WD
drivetrain, reinforced planetary axles, three-mode steering system, strong
hydraulic performance, and fully enclosed R-Series cab combine to deliver
predictable handling, reduced operator fatigue, and long operational life.
The Power Quick-Tach system further enhances
functionality, allowing rapid switching between attachments such as
forks, buckets, grapples, and agricultural or construction implements.
The Bobcat TL35.70 is widely used across job sites requiring a
combination of height, capacity, durability, and flexible attachment
support. Its reinforced frame, structural boom design, protected
hydraulic routing, and simplified serviceability make it reliable under
harsh operating conditions and heavy daily use.
The TL35.70 is available with two engine
configurations: Perkins 1104D-44TA or Bobcat D34 (Turbo Diesel). Both engines
deliver strong torque curves suited for telehandler applications.
Technical Data:
- Engine model: Perkins 1104D-44TA
- Engine type: 4-cylinder, 4-stroke, turbocharged diesel
- Displacement: 4.4 L (4,400 cc)
- Rated power output: approx. 75-100 hp depending on region
- Peak torque: approx. 300-410 Nm (221-302 lb-ft)
- Aspiration: turbocharged with intercooler
- Fuel system: mechanically or electronically governed rotary fuel injection
- Emissions: Tier 3 / Tier 2 no-DPF
- Fuel type: ULSD where required
- Idle speed: approx. 800 rpm
- Max governed rpm: approx. 2,200-2,400 rpm
Lubrication System:
- Oil capacity: approx. 8.5-12 L (9-12.7 qt)
- Recommended oil: SAE 15W-40 API CI-4/CK-4
- Oil pressure: approx. 207-379 kPa (30-55 psi)
- Lubrication system: full-pressure wet-sump
- Filter: full-flow spin-on unit
Cooling System:
- Coolant capacity: approx. 12-15 L (12.7-15.8 qt)
- Radiator: heavy-duty multi-row construction
- Thermostat: approx. 82°C (180°F)
- System pressure: approx. 13-16 psi
Technical Data:
- Engine model: Bobcat D34
- Engine type: 3.4-liter turbocharged 4-cylinder diesel
- Displacement: 3.4 L (207 cu.in)
- Rated power: approx. 74-100 hp depending on emissions package
- Torque: approx. 350-450 Nm (258-332 lb-ft)
- Fuel system: high-pressure common-rail
- Emissions: Stage V / Tier 4 Final
- Aspiration: turbocharged, intercooled
- Idle speed: approx. 850 rpm
- Max governed speed: approx. 2,200-2,400 rpm
Lubrication System:
- Oil capacity: approx. 10-12 L (10.5-12.7 qt)
- Recommended oil: SAE 15W-40, API CK-4 or higher
- Normal oil pressure: approx. 36-50 psi
Cooling System:
- Coolant capacity: approx. 15-18 L (15.8-19 qt)
- Cooling pressure: approx. 14-17 psi
- Radiator: heavy-duty telehandler-grade
- Fan: hydraulic or mechanical depending on model year
The hydrostatic drive system provides precise
performance during loading, lifting, and tight positioning.
Transmission
- Type: hydrostatic, variable displacement
- Forward travel speed (max): approx. 30 km/h (18.6 mph)
- Reverse travel speed: similar to forward
- Low-speed / creep range: approx. 7-9 km/h (4-5.5 mph)
- Direction control: joystick or shuttle lever
- Transmission fluid capacity: approx. 10-15 L
- Recommended fluid: hydrostatic-grade oil
Axles
- Drive system: permanent 4WD
- Axle type: planetary reduction
- Front axle: rigid for stability
- Rear axle: oscillating for traction
- Oscillation range: approx. 8-12°
- Lubrication type: gear oil SAE 80W-90 or 85W-140
- Axle capacity: approx. 3-4 L per axle
Brakes
- Service brakes: sealed wet-disc hydraulic braking
- Parking brake: spring-applied, hydraulic-release
- Features: fade-resistant, low-maintenance, contamination-proof
- Operating voltage: 12 V
- Alternator: approx. 90-120 A
- Battery capacity: approx. 100-140 Ah
- Starter motor output: approx. 2.5-3.5 kW
- Harness: sealed, abrasion-resistant industrial harness
- Control systems: ECU engine control, safety pressures, sensors
- Display module: digital interface for diagnostics and machine status
- Wheel configuration: permanent 4WD
- Frame: reinforced welded-steel construction
- Standard tires: 12-16.5 industrial rough-terrain
- Optional tires: agricultural lug, solid industrial, flotation, non-marking
- Ground clearance: approx. 300-320 mm (11.8-12.6 in)
- Wheelbase: approx. 2.35-2.45 m (92.5-96.5 in)
- Undercarriage protection: full steel skid plating
- Steering type: hydrostatic power steering
- Steering modes: Front-wheel steer, Four-wheel coordinated steer, Crab steer
- Pump output: approx. 20-25 L/min (5.2-6.6 gpm)
- Steering articulation: depends on axle oscillation
- Turning radius: approx. 3.5-4.0 m (11.5-13.1 ft)
- System type: load-sense industrial hydraulic circuit
- Max pressure: approx. 250-270 bar (3,600-3,900 psi)
- Pump type: engine-driven hydraulic gear pump
- Auxiliary flow: approx. 80 L/min (21.1 gpm)
- Hydraulic oil: ISO VG 32 or 46
- Hydraulic reservoir: approx. 60-80 L (63-84 qt)
- Cylinders: double-acting lift, tilt, and extend cylinders
- Filtration: return-line filter with restriction indicator
| Service Refill Capacities |
- Engine oil: 8-12 L
- Coolant: 12-18 L
- Transmission oil: 10-15 L
- Axle oil: 3-4 L per axle
- Hydraulic system: 60-80 L
- Diesel fuel tank: approx. 80-100 L (21-26 gal)
- Rated lift capacity: 3,500 kg (7,716 lb)
- Maximum lift height: approx. 7.0 m (23 ft)
- Maximum forward reach: approx. 3.7-4.0 m (12.1-13.1 ft)
- Capacity at max height: approx. 2,200-2,400 kg
- Capacity at max reach: approx. 1,000-1,300 kg
- Travel speed: 30 km/h (18.6 mph)
- Drawbar pull: approx. 32-40 kN (7,200-9,000 lbf)
- Boom breakout force: approx. 35-40 kN
- Bucket breakout force: approx. 45-50 kN
- Overall length: approx. 5.0-5.2 m (197-205 in)
- Length to fork heel: approx. 4.3-4.5 m (169-177 in)
- Overall width: approx. 2.0-2.1 m (79-83 in)
- Overall height: approx. 2.2-2.3 m (86-90 in)
- Wheelbase: approx. 2.35-2.45 m
- Ground clearance: approx. 300-320 mm
- Standard fork length: 1,200 mm (47 in)
- Optional fork sizes: 1,000-1,500 mm (39-59 in)
- Carriage width: approx. 1,200-1,500 mm
- Max fork height: approx. 7.0 m
- Max reach: approx. 3.7-4.0 m
- Turning radius: approx. 3.5-4.0 m
- Free-lift: minimal due to telehandler boom design
- Operating weight: approx. 6,000-6,500 kg (13,228-14,330 lb)
- Working weight with attachments: approx. 6,200-6,800 kg
250-Hours
- Engine oil + filter replacement
- Lubricate all grease points
- Clean radiator and hydraulic cooler
- Check electrical connectors and battery terminals
500-Hours
- Replace fuel filters
- Check axle oil levels
- Inspect hydraulic filters
- Inspect driveline and U-joints
1,000-Hours
- Replace hydraulic return filter
- Replace axle oil
- Inspect boom wear pads and slide components
- Torque wheel fastenings
2,000-Hours
- Replace hydraulic oil
- Replace coolant
- Perform full structural boom inspection
- Conduct hydraulic flow and pressure test
- Inspect drivetrain, electrical harness, alternator, hoses
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |