Bobcat TL723 Specifications
The Bobcat TL723 telehandler is a member of the
R-Series family of material-handling machines engineered to deliver strong
lifting performance, excellent forward visibility, rugged structural durability,
and low total cost of ownership. It occupies the high-capacity middle range in
Bobcat’s telehandler lineup, offering a powerful combination of lift height,
reach, weightlifting capability, and multi-application versatility. With a rated
load capacity of 3,500 kg (7,700 lb), the TL723 provides reliable handling of
palletized goods, aggregate materials, hay bales, construction supplies, waste
handling, and general loading operations.
A primary feature distinguishing the TL723 from smaller models such as the TL519
and TL619 is its enhanced boom geometry and reinforced chassis, giving it a
maximum lift height of approximately 7.0-7.3 meters (23-24 ft), depending on the
configuration, along with a strong forward reach profile.
The telehandler is powered by a robust
turbocharged 3.4-liter diesel engine tuned to provide both high torque
at low engine speeds and efficient fuel consumption. This engine,
combined with Bobcat’s smooth hydrostatic transmission and four-wheel
steering capability, allows precise and stable operation in both
confined and open working environments.
Bobcat designed the TL723 with emphasis on durability, comfort, and
uptime protection. Heavy-duty structural components, protected hydraulic
routing, sealed bushings, and reinforced boom sections improve long-term
machine stability. The spacious R-Series cab offers excellent visibility
through the low-profile boom and large glass area. Operator controls are
centralized around an ergonomic joystick and intuitive dashboard layout.
Quick-attach mounting, auxiliary hydraulics, and compatibility with many
Bobcat attachments allow users to maximize the machine’s utility.
The TL723 is powered by a turbocharged 3.4-liter diesel
engine engineered for durability, torque, and work-cycle efficiency. This engine
provides a balance of Hp, emissions compliance, and operational simplicity.
Technical Data
- Engine model: Bobcat-branded 3.4 L turbocharged diesel engine
- Displacement: 3.4 liters (3,400 cc; 207.4 cu.in)
- Power rating: approximately 100-110 hp (74-82 kW), depending on market
- Torque: strong low-rpm torque profile for hydrostatic drive performance
- Aspiration: turbocharged, air-to-air intercooling
- Fuel injection: electronically controlled
- Fuel type: ultra-low sulfur diesel (ULSD)
- Emissions: Tier 4 Final / Stage V compliant
- Engine cooling: liquid-cooled, belt-driven centrifugal pump
- Idle speed: approx. 800 rpm
- Maximum governed speed: approx. 2,300-2,500 rpm
Lubrication System
- Lubrication method: pressurized wet sump
- Engine oil capacity: 10-12 liters (10.5-12.7 qt)
- Recommended oil: SAE 15W-40, API CK-4 or equivalent
- Oil filtration: full-flow spin-on cartridge
- Normal oil pressure: 240-350 kPa (35-50 psi) under working rpm
Cooling System
- Coolant type: water-ethylene glycol mixture
- Cooling capacity: approx. 15-18 liters (15.8-19 qt)
- Radiator: heavy-duty, multi-row industrial core
- System pressure: approx. 13-16 psi (90-110 kPa)
- Cooling fan: mechanical or hydraulic, depending on region
The TL723 uses a hydrostatic transmission optimized for
torque modulation, smooth travel, and precise inching control.
Transmission
- Type: hydrostatic, variable displacement pump and motor
- Drive behavior: seamless forward/reverse changes
- Direction control: joystick direction switch
- High travel speed: approx. 40 km/h (25 mph) depending on configuration
- Low/creep travel: approx. 7-10 km/h (4.3-6.2 mph)
- Transmission fluid: hydrostatic drive oil
- Transmission fluid capacity: approx. 15-18 liters (15.8-19 qt)
Axles
- Drive configuration: permanent 4-wheel drive
- Axle design: planetary reduction housings
- Front axle: fixed for maximum stability
- Rear axle: oscillating for terrain adaptation
- Oscillation range: approx. 8-12°
- Axle oil: SAE 80W-90 or comparable heavy-duty gear oil
- Axle capacities: approx. 4-6 L (4.2-6.3 qt) per axle
Braking System
- Service brakes: hydraulic wet-disc brakes; sealed, maintenance-reduced
- Parking brake: spring-applied, hydraulic-release safety brake
- Brake characteristics: fade-resistant, durable under heavy load
- System voltage: 12 V
- Alternator output: approx. 120-140 A
- Battery capacity: approx. 120-150 Ah
- Starter motor: approx. 3.0-3.5 kW
- Wiring: sealed connectors, protected routing
- Electronic monitoring: battery state, coolant temperature, oil pressure,
parking brake status, hydraulic filter condition, boom transport lock
- Drive configuration: 4WD
- Chassis construction: welded high-strength steel
- Tire options:
- Large industrial: 405/70 R20
- Agricultural tread optional
- Solid industrial tires optional
- Standard tires: 405/70 R20
- Ground clearance: approx. 330-350 mm (13.0-13.8 in)
- Undercarriage protection: improved R-Series shield panels
The TL723 incorporates a three-mode steering system for enhanced
maneuverability.
- Steering type: hydrostatic power steering
- Steering pump flow: approx. 20-28 L/min (5.2-7.4 gpm)
- Turning radius: approx. 3.8-4.2 m (150-165 in)
- Steering axle: oscillating design improves traction and stability
Steering modes:
- Front-wheel steering (transport mode)
- Four-wheel coordinated steering (tight-turn mode)
- Crab steering (side-shift mode)
- Maximum working pressure: approx. 250-270 bar
(3,625-3,915 psi)
- Pump type: engine-driven gear or piston-assisted pump
- Standard auxiliary flow: approx. 100 L/min (26.4 gpm)
- Hydraulic reservoir: approx. 90-110 liters (95-116 qt)
- Oil grade: ISO VG 32 or 46, climate-dependent
- Lift, tilt, and extension cylinders: double-acting
- Auxiliary hydraulics: standard quick-attach couplers
| Service Refill Capacities |
- Engine oil: 10-12 liters (10.5-12.7 qt)
- Coolant: 15-18 liters (15.8-19 qt)
- Hydrostatic transmission: 15-18 liters (15.8-19 qt)
- Hydraulic reservoir: 90-110 liters (95-116 qt)
- Axle oil: approx. 4-6 liters (4.2-6.3 qt) per axle
- Fuel tank: approx. 120-140 liters (31.7-37 gal)
- Rated lifting capacity: approx. 3,500 kg (7,700 lb)
- Maximum lift height: approx. 7.0-7.3 m (23-24 ft)
- Maximum forward reach: approx. 3.7-4.0 m (12-13 ft)
- Capacity at max height: approx. 2,200-2,500 kg (4,850-5,511 lb)
- Capacity at full forward reach: approx. 1,000-1,300 kg (2,204-2,866 lb)
- Travel speed: approx. 40 km/h (25 mph)
- Drawbar pull: approx. 40-55 kN (8,992-12,364 lbf)
- Breakout force: approx. 55-60 kN (12,360-13,500 lbf)
- Overall length: approx. 6.0-6.2 m (236-244 in)
depending on attachment
- Overall width: approx. 2.30-2.35 m (91-93 in)
- Overall height: approx. 2.45-2.55 m (96-100 in)
- Wheelbase: approx. 2.8-3.0 m (110-118 in)
- Ground clearance: approx. 330-350 mm (13-14 in)
- Standard fork length: 1,200 mm (47 in)
- Optional fork lengths: 1,000-1,500 mm (39-59 in)
- Carriage width: approx. 1,200-1,500 mm
- Maximum fork height: approx. 7.0-7.3 m (23-24 ft)
- Maximum horizontal reach: approx. 3.7-4.0 m
- Free lift: approx. 120-200 mm
- Turning radius: approx. 3.8-4.2 m
- Operating weight: approx. 7,200-8,000 kg (15,873-17,637 lb) depending on
configuration
- Optional equipment may increase weight by 100-300 kg
250-Hour Service
- Replace engine oil and oil filter
- Lubricate boom pivots and steering joints
- Clean radiator fins and coolers
- Inspect battery condition
500-Hour Service
- Replace fuel filters
- Inspect hydraulic filters
- Check axle lubricant condition
- Inspect driveline couplings
1,000-Hour Service
- Replace hydraulic return filter
- Replace axle oil
- Inspect boom wear pads and guides
- Verify wheel lug torque
2,000-Hour Service
- Replace hydraulic oil and coolant
- Full boom structure inspection
- Test hydraulic pump flow and pressure
- Inspect electrical system and connectors
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |