Bobcat V519 Specifications
The Bobcat V519 VersaHANDLER telehandler is a compact
yet highly versatile lifting machine designed to combine the functionality of a
skid-steer loader, industrial forklift, and compact telehandler into a single
multipurpose platform. With a rated lift capacity of 2,495 kg (5,500 lb) and a
maximum lift height of 5.84 meters (230 inches), the V519 occupies an essential
operational niche for construction, agriculture, landscaping, industrial
logistics, and rental-fleet applications.
Its compact footprint, strong break-out forces,
multi-mode steering, and hydrostatic transmission make it well-suited
for confined spaces, uneven terrain, or high-duty-cycle material
handling. The machine was engineered with an emphasis on operator
comfort, long-term durability, and maximum flexibility through the use
of Bob-Tach and Power Quick-Tach attachment interfaces.
At the heart of the V519’s capability is its 74-Hp turbocharged diesel
engine, which delivers solid low-end torque and steady power across a
broad RPM range. Combined with a robust load-sense hydraulic system and
a high auxiliary hydraulic flow rate of approximately 80 L/min, the V519
can power a wide array of hydraulic attachments while maintaining strong
boom performance. The telescopic boom is reinforced for high-cycle
durability, provides stable lifting at full extension, and offers
sufficient reach for stacking, loading, and material placement. The
V519’s hydrostatic drive system provides smooth, intuitive control,
critical for precision load handling.
The fully enclosed cab gives the operator wide-angle visibility,
ergonomic joystick control, integrated speed management, and improved
safety through well-organized instrumentation. With simplified daily
maintenance access and a structural design intended to withstand
intensive use, the Bobcat V519 delivers reliability, operational
continuity, and multipurpose performance across diverse job conditions.
The Bobcat V519 is equipped with a 74-Hp turbocharged
diesel engine, typically a Bobcat-branded 3.4-liter industrial diesel built to
comply with Tier 4 Final/Stage IV emissions. The engine is optimized for torque
output at lower engine speeds, benefiting lifting, hydraulic power, and travel
operations under load.
Technical Data
- Engine model: Bobcat D34
- Engine type: 4-cylinder, 4-stroke, turbocharged diesel
- Displacement: approximately 3.4 L
- Rated output: 74 hp (approximately 55 kW)
- Torque: estimated 300-360 Nm (industry-standard for 3.4 L turbo industrial
engines)
- Fuel system: high-pressure common rail injection
- Aspiration: turbocharged with intercooler
- Emissions: compliant with Tier 4 Final / Stage IV
- Fuel type: ULSD
- Idle speed: approximately 850 rpm
- Maximum governed speed: approximately 2,400-2,500 rpm
Lubrication System
- Lubrication type: full-pressure wet sump
- Engine oil capacity: approximately 8-10 L
- Recommended oil grade: SAE 15W-40, API CI-4/CK-4
- Oil filter: full-flow spin-on
- Oil pressure: 35-55 psi
Cooling System
- Cooling capacity: approximately 10-15 L
- Cooling type: liquid-cooled
- Radiator: heavy-duty multi-row industrial
- Fan: hydraulic or thermostatic mechanical (depending on year)
- Coolant: 50/50 ethylene glycol mixture
- Operating pressure: 13-16 psi
Transmission
- Type: hydrostatic, variable displacement
- Forward maximum speed: 29.5 km/h (18.3 mph)
- Reverse speed: similar to forward
- Creep mode: approximately 6-8 km/h (4-5 mph)
- Control: joystick or travel lever with integrated inching mode
- Transmission fluid capacity: approximately 10-15 L
- Primary advantages: infinite speed variability, smooth directional changes,
precision load positioning
Axles
- Drive configuration: permanent 4WD
- Axle design: planetary reduction hubs
- Front axle: fixed, heavy-duty
- Rear axle: oscillating for uneven terrain
- Oscillation angle: approximately 8-12°
- Axle lubrication: SAE 80W-90 or 85W-140
- Axle capacity: approximately 3-5 L per axle
Braking System
- Service brakes: hydraulic wet-disc brakes
- Parking brake: spring-applied, hydraulic-release automatic parking brake
- Brake characteristics: sealed, low maintenance, high durability
- System voltage: 12 V
- Alternator: approximately 80-120 A
- Battery: heavy-duty 100-140 Ah
- Starter: 2.5-3.5 kW
- Wiring: sealed, industrial-grade harness
- Display: digital display with status indicators for engine, hydraulics, travel
mode, fuel, errors
- Safety interlocks: boom lockout, travel-gear lock, attachment lock sensors
- Drive: permanent four-wheel drive
- Frame: reinforced welded-steel telehandler chassis
- Standard tires: 405/70-20 rough-terrain tires
- Optional tires: solid industrial, flotation, agricultural lug, non-marking
- Wheelbase: 2,819 mm (111 in)
- Ground clearance: approximately 280-320 mm
- Protective features: skid plates, enclosed routing for hydraulics and
electronics
The V519 uses a multi-mode hydrostatic steering system.
Steering modes:
- Front-wheel steer
- Four-wheel coordinated steer
- Crab steer
- Steering pump flow: 15-25 L/min
- Turning radius (outside): approximately 3.0-3.5 m
- Rear axle oscillation enhances stability and traction
- Hydraulic system type: load-sense or fixed
displacement (depending on year)
- Maximum hydraulic pressure: approximately 230-250 bar (3,300-3,600 psi)
- Auxiliary hydraulic flow: 80 L/min (21.1 gpm)
- Hydraulic reservoir capacity: approximately 60-80 L
- Hydraulic oil type: ISO VG 32/46
- Cylinders: double-acting (lift, tilt, extend)
- Attachment interface: Bob-Tach or Power Quick-Tach
- Filtration: return-line filter with indicator
| Service Refill Capacities |
- Engine oil: 8-10 L
- Cooling system: 10-15 L
- Transmission: 10-15 L
- Hydraulic system: 60-80 L
- Axles: 3-5 L each
- Fuel tank: approximately 70-100 L
- Rated lift capacity: 2,495 kg (5,500 lb)
- Maximum lift height: 5.84 m (230 in)
- Maximum forward reach: 3.13 m (123.3 in)
- Capacity at max reach: approximately 1,136 kg (2,505 lb)
- Capacity at max height: approximately 2,000 kg
- Drawbar pull: approximately 6,744 lb (30 kN)
- Boom breakout force: 10,341 lb (approximately 46 kN)
- Bucket breakout force: approximately 45 kN
- Overall length: 4,686 mm (184.5 in)
- Length to fork heel: approximately 3,900-4,100 mm
- Overall width: 2,101 mm (82.7 in)
- Overall height: 2,101 mm (82.7 in), up to 2,291 mm with cab equipment
- Wheelbase: 2,819 mm (111 in)
- Ground clearance: approximately 280-320 mm
- Standard forks: 1,200 mm (47 in)
- Optional forks: 1,000-1,500 mm
- Carriage width: approximately 1,200-1,500 mm
- Maximum fork height: 5.84 m
- Maximum reach: 3.13 m
- Free-lift: minimal (telescopic boom design)
- Turning radius: 3.0-3.5 m
- Operating weight: 4,990 kg (11,001 lb)
- Working weight with attachments: 5,000-5,400 kg
250 Hours:
- Replace engine oil and filter
- Lubricate all pivot points
- Clean radiator/oil cooler
- Inspect battery
500 Hours:
- Replace fuel filters
- Inspect hydraulic return filter
- Check axle oil
- Inspect driveline components
1,000 Hours:
- Replace hydraulic return filter
- Replace axle oil
- Inspect boom wear pads and slides
- Torque wheel fasteners
2,000 Hours:
- Replace hydraulic oil
- Replace coolant
- Full boom structural inspection
- Hydraulic pressure/flow test
- Drivetrain inspection
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |