Cat 2C3500 Specifications
The Caterpillar 2C3500 is a 3,500 lb capacity cushion
tire forklift powered by gasoline or LPG, designed for indoor material handling
applications in warehouses and distribution centers. Powered by a Nissan K21
engine, this model delivers reliable performance with the durability expected
from Caterpillar equipment. The unit features a Powershift transmission,
hydraulic service brakes, and a range of mast configurations to accommodate
various lifting requirements. With its compact design and maneuverability, the
2C3500 represents Caterpillar's commitment to producing efficient,
high-performance material handling equipment for indoor operations where
maneuverability in confined spaces is essential. The model was manufactured from
2021 to 2024 with a C series designation.
Engine Model: Nissan K21
Engine Type: Four-cycle, water-cooled, spark-ignited OHV
Fuel Type: Gasoline or LPG
Number of Cylinders: 4
Displacement: 126 cu.in (2.1 L)
Continuous Output (SAE gross): 50 HP (37.4 kW) at 2,400 rpm
Maximum Torque (SAE gross): 111 lb-ft (151 Nm) at 2,000 rpm
Rated Speed: 2,400 rpm
Torque Speed: 2,000 rpm
Fuel Tank: 19.0 gal (72 L)
Lubrication Type: Forced circulation with gear pump
Oil Filter: Full-flow cartridge type
Recommended Oil Viscosity: SAE 10W-30 or 15W-40
Cooling Type: Water-cooled, forced circulation
Water Pump: Centrifugal type with belt drive
Radiator: Corrugated fin type with pressure cap
Thermostat: Wax pellet type
Cooling Fan: Suction type
Recommended Coolant: Ethylene glycol based antifreeze mixture
Transmission Type: Powershift
Number of Speeds: 1 forward / 1 reverse
Torque Converter: Single-stage, single-phase
Control: Hydraulic with column-mounted shift lever
Travel Speed (with load): 9.5 mph (15.5 km/h)
Travel Speed (without load): 10.0 mph (16.5 km/h)
Drive Axle (Front): Full-floating type
Steer Axle (Rear): Mounted with trunnion-type articulation
Service Brakes: Foot-operated, hydraulic
Service Brake Type: Hydraulic
Parking Brake: Hand-operated, mechanical
Parking Brake Type: Mechanical lever
System Voltage: 12 V
Battery: Lead-acid
Alternator: High-output
Starter Motor: High-torque
Frame Construction: Welded steel plate
Drive Configuration: 4x2 (front wheel drive)
Counterweight: Integrated into chassis design
Front Wheel Type: Disc wheel
Rear Wheel Type: Disc wheel
Number of Wheels: 2 front / 2 rear
Front Tire Size (standard): 18 x 6 x 12
Rear Tire Size (standard): 14 x 5 x 10
Tire Type: Solid cushion
Steering Type: Full hydrostatic power steering
Steering Control: Hydraulic with steering wheel
Steering Pump: Gear type, engine driven
Steering Cylinder: Double-acting hydraulic
Steering Features: Adjustable steering column on later models
Hydraulic System Type: Open center
Hydraulic Pump Type: Gear pump
Hydraulic Pump Flow: 19.0 gpm (72.0 L/min)
Relief Pressure (for attachments at main): 2,250 psi (155 bar)
Auxiliary Hydraulic Valves: Available configurations with up to 4 valves
Mast Type: Standard two-stage mast
Maximum Fork Height (standard): 131 in (3,330 mm)
Free Fork Height: 4.5 in (115 mm)
Lowered Mast Height: 83.0 in (2,110 mm)
Extended Mast Height: 179.0 in (4,550 mm)
Mast Tilt Forward: 5°
Mast Tilt Backward: 10°
Fork Thickness: 1.4 in (35 mm)
Fork Width: 3.9 in (100 mm)
Fork Length: 42 in (1,070 mm)
Fork Spacing (minimum out-to-out): 7.9 in (200 mm)
Fork Spacing (maximum out-to-out): 32.3 in (820 mm)
Rated Load Capacity: 3,500 lb (1,750 kg)
Load Center Distance: 24 in (500 mm)
Lift Speed (with load): 120 ft/min (620 mm/s)
Lift Speed (without load): 125 ft/min (630 mm/s)
Lowering Speed (with load): 99 ft/min (500 mm/s)
Lowering Speed (without load): 99 ft/min (500 mm/s)
Drawbar Pull (loaded, 60 min rating): 3,760 lb (16,750 N)
Drawbar Pull (loaded maximum, 5 min rating): 4,340 lb (19,330 N)
Gradeability (loaded at 1 mph): 40%
Gradeability (maximum loaded): 47%
Gradeability (maximum empty): 20%
Overall Length to Fork Face: 83.0 in (2,110 mm)
Overall Width (standard): 38.0 in (970 mm)
Overall Width (with optional duals): 39.5 in (997 mm)
Height to Top of Overhead Guard: 81.0 in (2,055 mm)
Height to Top of Overhead Guard (later models): 84.3 in (2,140 mm)
Wheelbase: 47.0 in (1,190 mm)
Front Tread Width (standard tires): 32.0 in (818 mm)
Front Tread Width (optional duals): 33.5 in (845 mm)
Rear Tread Width: 32.5 in (820 mm)
Ground Clearance (lowest point at mast): 3.0 in (75 mm)
Ground Clearance (center of wheelbase): 4.5 in (116 mm)
Seat Height: 42.0 in (1,070 mm)
Minimum Outside Turning Radius: 71.0 in (1,810 mm)
Minimum Aisle Width (90° stack, zero clearance, w/o load): 86.5 in (2,195 mm)
Empty Weight: 6,420 lb (2,910 kg)
Axle Load with Rated Load (front): 2,230 lb (1,010 kg)
Axle Load with Rated Load (rear): 4,230 lb (1,920 kg)
Axle Load without Load (front/rear total): 8,670 lb (3,930 kg)
Engine Oil Change Interval: 250 hours
Engine Oil Filter Change Interval: 250 hours
Transmission Fluid Change Interval: 1,000 hours
Hydraulic Oil Change Interval: 2,000 hours
Hydraulic Filter Change Interval: 500 hours
Coolant Change Interval: 2,000 hours or 2 years
Differential Oil Change Interval: 1,000 hours
Air Cleaner Element Replacement: When indicator shows restriction
Fuel Filter Replacement: 500 hours
Grease Type: Lithium complex NLGI No. 2
Recommended Engine Oil: API SL or higher for LPG/gasoline service
Recommended Transmission Fluid: Caterpillar TO-4 or equivalent
Recommended Hydraulic Fluid: ISO VG 46 anti-wear hydraulic oil
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |