Cat 2C6000 Specifications
The Caterpillar 2C6000 is a 6,000 lb capacity cushion
tire forklift engineered for efficient material handling in warehouses and
production facilities. Powered by a Nissan K25 engine operating on gasoline or
LP gas, this model combines maneuverability with reliable performance in tight
indoor environments. The truck features a powershift transmission for smooth
directional changes and a hydraulic system delivering 2,250 psi for attachment
compatibility.
With an 82.5 in outside turning radius and
gradeability reaching 38 percent loaded, the 2C6000 provides excellent
maneuverability in confined spaces. The design incorporates robust
construction for durable daily use, straightforward controls for
operator convenience, and easy access to service points for simplified
maintenance. The 2C6000 was manufactured as part of Caterpillar's
C-series forklift line, offering various mast configurations including
simplex, duplex, and triplex options.
Engine manufacturer and model: Nissan K25
Engine type: GCT 4-cylinder LPG/gasoline
Engine continuous output SAE gross: 63 HP (46.9 kW) at 2,700 rpm
Engine rated speed: 2,700 rpm
Engine maximum torque SAE gross: 139 lb-ft (188 Nm) at 1,600 rpm
Engine torque speed: 1,600 rpm
Engine displacement: 152 cu.in (2.5 L)
Number of cylinders: 4
Fuel system: Carbureted for gasoline/LPG operation
Fuel type: Gasoline or LP gas
Lubrication system: Full-pressure lubrication with oil filter
Cooling system: Liquid-cooled with pressurized radiator
Transmission type: Powershift with torque converter
Transmission specification: Shuttle shift transmission
Number of speeds forward: 1
Number of speeds reverse: 1
Type of drive control: Torque converter
Travel speed with load: 10.0 mph (16.5 km/h)
Travel speed without load: 10.5 mph (17.0 km/h)
Drive axle type: Heavy-duty drive axle with differential
Steer axle type: Heavy-duty steer axle with kingpin design
Service brake type: Hydraulic, foot-operated
Parking brake type: Mechanical, hand-operated
System voltage: 12V
Alternator type: Belt-driven
Starter motor: 12V
Frame construction: Robust chassis, all-welded
heavy-duty plate steel
Counterweight construction: Cast iron
Wheel configuration: 2x driven front / 2 rear
Number of wheels front: 2
Number of wheels rear: 2
Tire type: Cushion (solid)
Tire size front (standard): 21 x 8 x 15
Tire size rear: 16 x 6 x 10.5
Steering type: Hydrostatic power steering
Steering control: Steering wheel with hydraulic control unit
Steering pump type: Gear pump, integral with hydraulic system
Hydraulic system type: Gear pump system
Maximum operating pressure for attachments: 2,250 psi (155 bar)
Hydraulic system relief pressure: 2,250 psi (155 bar)
Hydraulic flow: 23.5 GPM (89.1 L/min)
Hydraulic pump type: Gear pump
Hydraulic control valves: Lever-operated
Number of lift cylinders: 2
Number of tilt cylinders: 2
Lift cylinder type: Double-acting
Tilt cylinder type: Double-acting
Mast type standard: Two-stage (simplex)
Mast type optional: Triplex three-stage mast available
Maximum fork height (standard two-stage mast): 130.5 in (3,320 mm)
Maximum fork height (triplex mast): 199 in (5,055 mm)
Free fork height (standard mast): 5.3 in (135 mm)
Mast height lowered (standard): 83.0 in (2,110 mm)
Mast height lowered (triplex): 84-88 in (2,134-2,235 mm)
Overall height with mast raised (standard): 178.5 in (4,540 mm)
Overall height with mast raised (triplex): 199 in (5,055 mm)
Mast tilt forward: 5 degrees
Mast tilt backward: 6 degrees
Fork carriage to DIN 15,173: Class II
Fork carriage width: 1,115 mm (43.9 in)
Forks thickness: 1.8 in (45 mm)
Forks width: 4.9 in (125 mm)
Forks length: 42 in (1,070 mm) standard, 48 in available
Fork spacing minimum out-to-out: 7.9 in (200 mm)
Fork spacing maximum out-to-out: 38.0 in (960 mm)
Load distance from axle to fork face: 17.2 in (436 mm)
Rated load capacity: 6,000 lb (3,000 kg)
Load centre distance: 24 in (500 mm)
Lifting speed with load: 105 fpm (530 mm/s)
Lifting speed without load: 105 fpm (540 mm/s)
Lowering speed with load: 98 fpm (500 mm/s)
Lowering speed without load: 98 fpm (500 mm/s)
Drawbar pull loaded (60 minute rating): 4,840 lb (21,500 N)
Drawbar pull loaded maximum (5 minute rating): 6,800 lb (30,200 N)
Gradeability at 1 mph with load: 33 percent
Gradeability maximum loaded: 38 percent
Gradeability maximum empty: 17 percent
Overall length: 96.5 in (2,450 mm) to fork face
Overall length with forks: 138.5 in (3,517 mm)
Overall width with standard tires: 44.0 in (1,115 mm)
Overall width with optional duals: 45.5 in (1,155 mm)
Wheelbase: 55.0 in (1,400 mm)
Tread width front (standard tires): 36.0 in (912 mm)
Tread width front (optional duals): 37.5 in (950 mm)
Tread width rear: 35.0 in (890 mm)
Ground clearance at lowest point at mast: 3.1 in (80 mm)
Ground clearance at center of wheelbase: 5.4 in (139 mm)
Height with lowered mast (standard): 83.0 in (2,110 mm)
Height to top of overhead guard: 81.5 in (2,070 mm)
Height seat: 42.4 in (1,080 mm)
Height with extended mast (standard): 178.5 in (4,540 mm)
Minimum outside turning radius: 82.5 in (2,095 mm)
Minimum aisle-90° stack-zero clearance without load: 99.5 in (2,530 mm)
Empty weight: 9,440 lb (4,280 kg)
Axle loading with rated load front: 2,820 lb (1,280 kg)
Axle loading with rated load rear: 6,580 lb (2,980 kg)
Axle loading without load front: 13,320 lb (6,040 kg)
Engine Oil and Filter Change: Every 250 hours or 3
months
Engine Air Filter Element: As indicated by restriction gauge (check daily)
Fuel Filter Replacement: Every 500 hours or 6 months
Hydraulic Oil Filter Replacement: Every 1,000 hours
Hydraulic Oil Change: Every 2,000 hours
Transmission Fluid and Filter Change: Every 1,000 hours
Drive Axle Oil Change: Every 1,000 hours
Coolant Change: Every 2,000 hours or 2 years
Chassis Greasing: Every 50 hours or weekly
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |