Cat 2P6000 Specifications
The Caterpillar 2P6000 is a 6,000 lb capacity internal
combustion forklift engineered for demanding material handling applications.
Powered by a Nissan K25 engine operating on gasoline or LP gas, this pneumatic
tire model combines durable construction with operational efficiency. The truck
features a powershift transmission for smooth directional changes and a
hydraulic system delivering 2,625 psi for attachment compatibility. With a 93.7
in outside turning radius and gradeability reaching 40.3% loaded, the 2P6000
provides maneuverability and performance in warehouse and outdoor environments.
The design emphasizes operator comfort with accessible service points and a
spacious operator compartment.
Engine model: Nissan K25
Engine type: 4-cylinder, 4-cycle, liquid-cooled, overhead valve
Displacement: 152 cu.in (2.5 L)
Bore and stroke: 3.5 x 3.8 in (89 x 96 mm)
Compression ratio: 8.5:1
Rated horsepower: 61 HP (45.8 kW) at 2700 rpm SAE gross)
Maximum torque: 129 lb-ft (186 Nm) at 1600 rpm SAE gross)
Firing order: 1-3-4-2
Fuel system: Downdraft carburetor with mechanical fuel pump
Fuel type: Gasoline or LP gas
Air cleaner: Dry type with replaceable element
Lubrication system: Gear pump, full-pressure lubrication with full-flow oil
filter
Oil pump capacity: 6.5 gpm (24.6 L/min) at rated speed
Cooling system: Liquid-cooled with centrifugal water pump, pressurized radiator
Cooling system type: Pressurized with recovery tank
Thermostat opening temperature: 180°F (82°C)
Transmission type: Powershift with torque converter
Transmission model: Integral type, single-stage, single-phase
Torque converter ratio: 2.0:1 at stall
Number of speeds forward / reverse: 1 / 1
Shift control: Electronic shift selector with direction control
Travel speed forward (loaded): 10.5 mph (17.0 km/h)
Travel speed forward (empty): 11.0 mph (18.0 km/h)
Travel speed reverse (loaded): 10.5 mph (17.0 km/h)
Travel speed reverse (empty): 11.0 mph (18.0 km/h)
Drive axle type: Full-floating, hypoid gear with differential
Drive axle ratio: 5.29:1
Differential type: Spur gear with four pinions
Steer axle type: Pivot mounted, kingpin design with self-aligning bearings
Steer axle oscillation: 10° each side
Service brakes: Hydraulic, self-adjusting, shoe type, foot-operated
Service brake actuation: Hydraulic with vacuum assist
Service brake diameter: 11.0 in (279 mm)
Parking brake: Mechanical, hand-operated, internally expanding shoe type on
driveshaft
System voltage: 12 V
Battery capacity: 85 AH, 620 CCA
Alternator type: Belt-driven, self-rectifying
Alternator output: 50 A
Starter motor: 12 V, 1.4 kW
Ignition system: Battery ignition with electronic distributor
Ignition timing: 10° BTDC at 750 rpm
Wheel configuration: 2x driven front / 2 rear
Wheel type: Cast iron spoke or disc
Frame construction: Heavy-duty plate steel, all-welded
Counterweight construction: Cast iron, bolted to frame
Tire type: Pneumatic
Tire size front (standard): 28x9-15-12PR
Tire size front (optional duals): 28 x 9-15-12PR
Tire size rear: 6.50 x 10-10PR
Tire ply rating front: 12 PR
Tire ply rating rear: 10 PR
Steering type: Hydrostatic power steering
Steering control: Steering wheel with hydraulic control unit
Steering pump type: Gear pump, integral with hydraulic system
Steering pump flow: 4.5 gpm (17.0 L/min) at rated speed
Steering cylinder: Double-acting, piston type
Number of turns lock-to-lock: 4.2
Steering angle: 84°
Hydraulic system type: Full-flow, gear pump with
priority valve for steering
Hydraulic pump type: Gear pump
Hydraulic pump displacement: 0.9 cu.in/rev (14.7 cc/rev)
Hydraulic pump flow: 16.5 gpm (62.5 L/min) at 2700 rpm
Relief pressure setting (main): 2625 psi (181 bar)
Relief pressure for attachments: 2625 psi (181 bar)
Hydraulic control valve: Monoblock, manually operated
Lift cylinder type: Double-acting, piston type
Tilt cylinder type: Double-acting, piston type
Number of lift cylinders: 2
Number of tilt cylinders: 2
Hydraulic fluid type: ISO VG 32 or 46
| Service Refill Capacities |
Fuel tank (gasoline): 15.0 gal (56.8 L)
Engine oil with filter: 4.5 qt (4.3 L)
Transmission fluid: 3.7 gal (14.0 L)
Hydraulic system: 11.5 gal (43.5 L)
Cooling system: 3.2 gal (12.1 L)
Differential and drive axle: 2.6 qt (2.5 L)
Mast type standard: Two-stage, simplex (free-lift)
Mast construction: Rolled channel sections with welded cross members
Maximum fork height (standard mast): 130 in (3300 mm)
Free fork height (standard mast): 5.9 in (150 mm)
Mast height lowered: 85.5 in (2170 mm)
Mast height extended: 179 in (4550 mm)
Mast tilt forward: 6°
Mast tilt backward: 10°
Lift chains: Roller type, two-strand
Lift chain adjustment: Equalizing type with threaded rods
Carriage type: Hook-type, Class II
Carriage width: 44.0 in (1118 mm)
Load backrest height: 34.5 in (876 mm)
Load backrest width: 46.0 in (1168 mm)
Rated capacity: 6000 lb (3000 kg)
Load center distance: 24 in (500 mm)
Lift speed with rated load: 99 fpm (500 mm/s)
Lift speed without load: 100 fpm (520 mm/s)
Lowering speed with rated load: 98 fpm (500 mm/s)
Lowering speed without load: 98 fpm (500 mm/s)
Drawbar pull loaded (60 minute rating): 4058 lb (18050 N)
Drawbar pull loaded maximum (5 minute rating): 4742 lb (21092 N)
Gradeability loaded at 1.0 mph: 26.4%
Gradeability maximum loaded: 40.3%
Gradeability maximum empty: 17.1%
Load moment constant: 19.5 in (495 mm)
Dimensions
Overall length to fork face: 107 in (2720 mm)
Overall length including forks: 149 in (3785 mm)
Overall width with standard tires: 50.0 in (1270 mm)
Overall width with optional duals: 67.5 in (1710 mm)
Overall height to top of overhead guard: 84 in (2125 mm)
Height seat: 47.7 in (1210 mm)
Height with lowered mast: 85.5 in (2170 mm)
Height with extended mast: 179 in (4550 mm)
Wheelbase: 67.0 in (1700 mm)
Tread width front (standard tires): 42.0 in (1070 mm)
Tread width front (optional duals): 47.5 in (1210 mm)
Tread width rear: 38.5 in (980 mm)
Ground clearance at lowest point (mast): 5.4 in (136 mm)
Ground clearance at center of wheelbase: 1.4 in (189 mm)
Fork thickness: 1.8 in (45 mm)
Fork width: 5.0 in (125 mm)
Fork length: 42.0 in (1070 mm)
Fork spacing minimum out-to-out: 9.8 in (250 mm)
Fork spacing maximum out-to-out: 39.4 in (1000 mm)
Minimum outside turning radius: 93.7 in (2380 mm)
Minimum aisle width for 90° stacking (zero clearance, w/o load): 113.2 in (2875
mm)
Distance from face of forks to drive axle centerline: 12.5 in (318 mm)
Weights
Empty weight (with standard tires, full fuel, no load): 9400 lb (4260 kg)
Weight distribution without load (front): 3860 lb (1700 kg)
Weight distribution without load (rear): 5540 lb (2560 kg)
Weight distribution with rated load (front): 13790 lb (6390 kg)
Weight distribution with rated load (rear): 1610 lb (870 kg)
Counterweight weight: 2750 lb (1247 kg)
Maximum weight with optional duals: 9850 lb (4468 kg)
Engine oil change interval: 250 hours under normal
conditions
Engine oil filter change: Every oil change
Transmission fluid change: 2000 hours
Transmission filter change: 1000 hours
Hydraulic fluid change: 2000 hours
Hydraulic filter change: 500 hours
Air cleaner element check: Daily
Air cleaner element replacement: When indicator shows restriction or annually
Coolant change: Every 24 months or 4000 hours
Brake fluid level check: Weekly
Parking brake adjustment: As required, inspect monthly
Drive axle oil change: 2000 hours
Steer axle kingpin lubrication: Every 100 hours
Mast chain lubrication: Every 100 hours
Mast chain adjustment: Check every 500 hours
Tire pressure front: 85 psi (5.9 bar)
Tire pressure rear: 75 psi (5.2 bar)
Valve lash intake: 0.014 in (0.36 mm) cold
Valve lash exhaust: 0.014 in (0.36 mm) cold
Spark plug gap: 0.032 in (0.8 mm)
Engine idle speed: 750 rpm
Fast idle speed (no load): 2700 rpm
Hydraulic system test pressure: 2900 psi (200 bar) maximum
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |