Cat 2P7000 Specifications
The Caterpillar 2P7000 is a 7,000 lb capacity pneumatic
tire forklift designed for rigorous material handling applications. Powered by a
Nissan K25 engine operating on gasoline or LPG, this model combines reliable
performance with the versatility of dual-fuel capability. The unit features a
durable Powershift transmission, hydraulic service brakes, and a range of mast
configurations to accommodate various lifting requirements. With its robust
construction and pneumatic tires, the 2P7000 excels in both indoor and outdoor
environments, delivering consistent performance for loading, unloading, and
stacking operations. The model is recognized for its operator comfort,
serviceability, and Caterpillar's commitment to quality in material handling
equipment.
Engine Model: Nissan K25
Engine Type: Four-cycle, water-cooled, spark-ignited
Fuel Type: Gasoline or LPG (dual-fuel capability)
Number of Cylinders: 4
Cylinder Arrangement: In-line
Bore: 3.5 in (89 mm)
Stroke: 3.94 in (100 mm)
Displacement: 152 cu.in (2.5 L)
Compression Ratio: 8.7:1 for gasoline, 9.3:1 for LPG
Aspiration: Naturally aspirated
Continuous Output (S.A.E. gross): 61 HP (45.8 kW) at 2,700 rpm
Maximum Torque (S.A.E. gross): 129 lb-ft (186 Nm) at 1,600 rpm
Rated Engine Speed: 2,700 rpm
Torque Speed: 1,600 rpm
Firing Order: 1-3-4-2
Idle Speed: 700 rpm
Fuel System: Downdraft carburetor with LPG regulator
Ignition System: Electronic ignition
Lubrication Type: Forced circulation with gear pump
Oil Pump Type: Gear type
Oil Filter: Full-flow cartridge type
Recommended Oil Viscosity: SAE 10W-30 or 15W-40
Oil Capacity (with filter change): 4.2 qt (4.0 L)
Cooling Type: Water-cooled, forced circulation
Water Pump: Centrifugal type with belt drive
Radiator: Corrugated fin type with pressure cap
Thermostat: Wax pellet type
Cooling Fan: Suction type
Coolant Capacity: 9.5 qt (9.0 L)
Recommended Coolant: Ethylene glycol based antifreeze mixture
Transmission
Transmission Type: Powershift
Number of Speeds: 1 forward / 1 reverse
Torque Converter: Single-stage, single-phase
Control: Hydraulic with column-mounted shift lever
Reduction System: Planetary gear type in drive axle
Travel Speed
Forward Speed (with load): 11.0 mph (17.5 km/h)
Forward Speed (without load): 11.5 mph (18.5 km/h)
Reverse Speed (with load): 11.0 mph (17.5 km/h)
Reverse Speed (without load): 11.5 mph (18.5 km/h)
Axles
Drive Axle (Front): Full-floating, banjo type with planetary wheel ends
Drive Axle Reduction: Double reduction
Steer Axle (Rear): Mounted with trunnion-type articulation
Axle Oscillation: ± 9°
Brakes
Service Brakes: Foot-operated, hydraulic
Brake Type: Internal expanding
Brake Actuation: Hydraulic with master cylinder
Parking Brake: Hand-operated, mechanical
Parking Brake Type: Mechanical linkage to service brakes
System Voltage: 12 V
Battery Capacity: 70 Ah
Alternator: 12 V-50 A
Alternator Regulation: Integral electronic regulator
Starter Motor: 12 V-2.2 kW
Ignition System: Electronic with distributor
Frame Construction: Welded steel plate
Drive Configuration: 4x2 (front wheel drive)
Counterweight: Cast iron, integrated into chassis design
Front Wheel Type: Disc wheel
Front Wheel Rim Size (standard): 250 x 15
Front Wheel Rim Size (optional duals): 28 x 9-15
Rear Wheel Rim Size: 6.50 x 10
Front Wheel Fasteners: 8 studs
Front Tire Size (standard): 250 x 15-12PR
Front Tire Size (optional duals): 28 x 9-15-12PR
Rear Tire Size: 6.50 x 10-12PR
Tire Type: Pneumatic with tube
Tire Ply Rating: 12PR front, 12PR rear
Steering Type: Full hydrostatic power steering
Steering Control: Hydraulic with steering wheel
Steering Pump: Gear type, engine driven
Steering Cylinder: Double-acting hydraulic
Hydraulic System Type: Open center
Hydraulic Pump Type: Gear pump
Relief Pressure (main system): 2,625 psi (181 bar)
Control Valve: Monoblock type
| Service Refill Capacities |
Fuel Tank: 19.0 gal (72 L)
Engine Oil (with filter): 4.2 qt (4.0 L)
Cooling System: 9.5 qt (9.0 L)
Transmission: 4.2 gal (16 L)
Hydraulic System: 11.1 gal (42 L)
Drive Axle (differential): 3.7 qt (3.5 L)
Brake Fluid Reservoir: 0.3 qt (0.3 L)
Mast Type: Standard two-stage mast
Maximum Fork Height: 131 in (3,330 mm)
Free Fork Height: 5.9 in (150 mm)
Lowered Mast Height: 91.0 in (2,310 mm)
Extended Mast Height: 180 in (4,570 mm)
Mast Tilt Forward: 6°
Mast Tilt Backward: 10°
Optional Mast Types: Three-stage full free lift mast available
Optional Mast Lift Height: 187 in (4,750 mm)
Rated Load Capacity: 7,000 lb (3,500 kg)
Load Center Distance: 24 in (500 mm)
Lift Speed (with load): 83 ft/min (420 mm/s)
Lift Speed (without load): 86 ft/min (440 mm/s)
Lowering Speed (with load): 98 ft/min (500 mm/s)
Lowering Speed (without load): 98 ft/min (500 mm/s)
Drawbar Pull (loaded, 60 min rating): 3,837 lb (17,069 N)
Drawbar Pull (loaded maximum, 5 min rating): 4,455 lb (19,816 N)
Gradeability (loaded at 1 mph / 1.6 km/h): 21.9%
Gradeability (maximum loaded): 39.7%
Gradeability (maximum empty): 14.6%
Overall Length to Fork Face: 110 in (2,790 mm)
Overall Length with Forks (42 in forks): 152 in (3,860 mm)
Overall Width (with standard tires): 51.0 in (1,300 mm)
Overall Width (with optional duals): 67.5 in (1,710 mm)
Height to Top of Overhead Guard: 84.5 in (2,140 mm)
Seat Height: 47.7 in (1,210 mm)
Height (with mast lowered): 91.0 in (2,310 mm)
Height (with mast extended): 180 in (4,570 mm)
Wheelbase: 67.0 in (1,700 mm)
Front Tread Width (standard tires): 42.0 in (1,070 mm)
Front Tread Width (optional duals): 47.5 in (1,210 mm)
Rear Tread Width: 38.5 in (980 mm)
Ground Clearance (lowest point at mast): 5.4 in (146 mm)
Ground Clearance (center of wheelbase): 7.0 in (180 mm)
Minimum Turning Radius: 96.0 in (2,440 mm)
Load Moment Constant: 19.5 in (495 mm)
Fork Thickness: 2.0 in (50 mm)
Fork Width: 5 in (125 mm)
Fork Length: 42 in (1,070 mm)
Fork Spacing (minimum out-to-out): 9.8 in (250 mm)
Fork Spacing (maximum out-to-out): 39.4 in (1,000 mm)
Fork Carriage Width: 44.1 in (1,120 mm)
Backrest Height: 33.5 in (850 mm)
Minimum Outside Turning Radius: 96.0 in (2,440 mm)
Minimum Aisle Width (90° stack, zero clearance, w/o load): 115.5 in (2,935 mm)
Empty Weight: 10,340 lb (4,690 kg)
Axle Load (with rated load, front): 15,400 lb (7,250 kg)
Axle Load (with rated load, rear): 1,990 lb (940 kg)
Axle Load (without load, front): 3,700 lb (1,680 kg)
Axle Load (without load, rear): 6,640 lb (3,010 kg)
Engine Oil Change Interval: 250 hours
Engine Oil Filter Change Interval: 250 hours
Transmission Fluid Change Interval: 1,000 hours
Transmission Filter Change Interval: 1,000 hours
Hydraulic Oil Change Interval: 2,000 hours
Hydraulic Filter Change Interval: 500 hours
Coolant Change Interval: 2,000 hours or 2 years
Differential Oil Change Interval: 1,000 hours
Air Cleaner Element Replacement: When indicator shows restriction
Fuel Filter Replacement: 500 hours
Spark Plug Replacement: 500 hours
Spark Plug Gap: 0.035 in (0.9 mm)
Brake Fluid Replacement: 1,000 hours or annually
Engine Valve Clearance (intake): 0.015 in (0.38 mm) hot
Engine Valve Clearance (exhaust): 0.015 in (0.38 mm) hot
Tire Pressure (front): 85 psi (5.9 bar)
Tire Pressure (rear): 75 psi (5.2 bar)
Mast Chain Adjustment: 0.4-0.8 in (10-20 mm) slack at mid-height
Lubrication Points: 12 chassis grease fittings
Grease Type: Lithium complex NLGI No. 2
Recommended Engine Oil: API SG or higher
Recommended Transmission Fluid: Caterpillar TO-4 or equivalent
Recommended Hydraulic Fluid: ISO VG 46 anti-wear hydraulic oil.
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |