Cat 2PD6000 Specifications
The Caterpillar 2PD6000 is a 6,000 lb capacity
diesel-powered pneumatic tire forklift engineered for demanding outdoor
environments. It combines a robust, fuel-efficient Mitsubishi S4S diesel engine
with a durable 2-speed powershift transmission for reliable performance in
applications such as lumber yards, construction sites, and agriculture. The
machine features a heavy-duty hydraulic system, wet disc brakes for low
maintenance, and a hydrostatic steering system for precise control. The operator
compartment is designed for comfort and visibility, featuring low-effort
controls and an adjustable seat. The 2PD6000 is recognized for its rugged
construction, serviceability, and ability to maintain high productivity under
continuous use, making it a preferred choice for operations requiring a durable,
high-capacity material handler.
Engine Model: Mitsubishi S4S
Power Type: Diesel
Continuous Output SAE Gross: 51 hp (38.5 kW) @ 2,250 rpm
Maximum Torque SAE Gross: 134 lb-ft (185 Nm) @ 1,800 rpm
Number of Cylinders: 4
Displacement: 203 cu in (3.3 L)
Bore and Stroke: 3.7 x 4.7 in (94 x 120 mm)
Compression Ratio: 17.5:1
Fuel System: Direct injection
Lubrication System Type: Gear pump, full-flow filtration
Oil Pressure (at operating temperature): 50-70 psi (3.4-4.8 bar)
Oil Capacity (with filter change): 11.0 US qt (10.4 L)
Recommended Oil: API service class CF or higher, SAE 15W-40
Cooling System Type: Pressurized, centrifugal pump with thermostat
Coolant Capacity: 3.4 US gal (12.9 L)
Thermostat Opening Temperature: 180°F (82°C)
Transmission Type: Powershift with electronic
modulation
Number of Speeds Forward / Reverse: 2 / 2
Transmission Control: Single lever with integral inching control
Travel Speed (loaded)-1st / 2nd: 6.0 / 10.0 mph (9.5 / 16.0 km/h)
Travel Speed (empty)-1st / 2nd: 7.0 / 11.0 mph (11.0 / 17.0 km/h)
Drive Axle (Front): Full-floating, heavy-duty, with planetary wheel ends
Steer Axle (Rear): Pivot-type, oscillating, with sealed, greased and tapered
roller bearings
Service Brake Type: Foot-operated, hydraulic, self-adjusting wet disc brakes on
front wheels
Parking Brake Type: Hand-operated, mechanically actuated disc brake on the
transmission output shaft
System Voltage: 12 V
Battery: 12 V, 650 CCA, 100 Ah (maintenance-free)
Alternator: 12 V, 55 A
Starter Motor: 12 V, 3.0 kW
Keyed Ignition: With glow plug pre-heat for cold starts
Wheel Configuration (x = driven): 2x front / 2 rear
Tire Type: Pneumatic
Tire Size (front, standard): 28 x 9-15, 12 PR
Tire Size (front, optional duals): 28 x 9-15, 12 PR
Tire Size (rear): 6.50-10, 10 PR
Wheelbase: 67.0 in (1,700 mm)
Front Tread Width (standard tires): 42.0 in (1,070 mm)
Front Tread Width (optional duals): 47.5 in (1,210 mm)
Rear Tread Width: 38.5 in (980 mm)
Steering Type: Hydrostatic power steering
Steering Pump Flow: 4.0 gpm (15.2 L/min)
Steering System Pressure: 2,000 psi (138 bar)
Steering Cylinder: Double-acting, hydraulic
Steering Angle: 80° (each direction)
Hydraulic Pump Type: Gear pump (main)
Pump Flow (at rated engine speed): 17.8 gpm (67.5 L/min)
System Relief Pressure (main): 2,625 psi (181 bar)
Control Valve: Monoblock, with integral overload relief
Hydraulic Fluid Capacity (tank only): 12.5 US gal (47.3 L)
Hydraulic Fluid Type: ISO VG 32 or 46
| Service Refill Capacities |
Fuel Tank: 17.0 US gal (64.4 L)
Engine Oil (with filter): 11.0 US qt (10.4 L)
Cooling System: 3.4 US gal (12.9 L)
Transmission: 4.2 US qt (4.0 L)
Hydraulic Tank: 12.5 US gal (47.3 L)
Drive Axle Differential: 3.2 US qt (3.0 L)
Drive Axle Planetary Hubs (each): 2.1 US qt (2.0 L)
Mast Type Available: Two-Stage (Simplex) or Three-Stage
(Triplex) with free lift
Mast Construction: Rolled channel, I-beam design with full roller carriage
Mast Lowered Height (2-stage): 85.5 in (2,170 mm)
Mast Lowered Height (3-stage): 84.0 in (2,135 mm)
Mast Extended Height (2-stage, maximum fork height): 130 in (3,300 mm)
Mast Extended Height (3-stage, maximum fork height): 186 in (4,724 mm)
Free Fork Height (2-stage): 5.9 in (150 mm)
Free Fork Height (3-stage): 55.0 in (1,397 mm)
Tilt Range (forward / backward): 6° / 10°
Carriage Type: Class II, hook type
Carriage Width: 39.4 in (1,000 mm)
Fork Thickness: 1.8 in (45 mm)
Fork Width: 5.0 in (125 mm)
Fork Length: 42.0 in (1,070 mm)
Fork Spread (out-to-out, min / max): 9.8 in / 39.4 in (250 mm / 1,000 mm)
Rated Capacity: 6,000 lb (3,000 kg)
Load Center Distance: 24 in (500 mm)
Lift Speed (with rated load): 96 fpm (490 mm/s)
Lift Speed (without load): 100 fpm (510 mm/s)
Lowering Speed (with rated load): 98 fpm (500 mm/s)
Lowering Speed (without load): 98 fpm (500 mm/s)
Drawbar Pull (loaded, 60 min rating): 3,859 lb (17,168 N)
Drawbar Pull (loaded, 5 min rating): 4,345 lb (19,326 N)
Gradeability (loaded at 1 mph / 1.6 km/h): 24.5%
Gradeability (maximum, loaded): 41.1%
Gradeability (maximum, empty): 17.3%
Length to Face of Forks: 107 in (2,720 mm)
Overall Width (with standard tires): 50.0 in (1,270 mm)
Overall Width (with optional duals): 67.5 in (1,710 mm)
Height to Top of Overhead Guard: 84.0 in (2,125 mm)
Height (with lowered mast-2-stage): 85.5 in (2,170 mm)
Height (with extended mast-2-stage): 179 in (4,550 mm)
Seat Height: 47.7 in (1,210 mm)
Ground Clearance (at lowest point of mast): 5.4 in (136 mm)
Ground Clearance (at center of wheelbase): 1.4 in (189 mm)
Minimum Outside Turning Radius: 93.7 in (2,380 mm)
Right Angle Stack Aisle (with 48 x 48 in load): 113.2 in (2,875 mm)
Operating Weight (empty): 9,640 lb (4,370 kg)
Axle Load (empty, front / rear): 3,920 lb / 5,720 lb (1,770 kg / 2,600 kg)
Axle Load (with rated load, front / rear): 13,890 lb / 1,750 lb (6,550 kg / 820
kg)
Engine Oil and Filter Change: Every 250 hours or 3
months
Engine Air Filter Element: As indicated by restriction gauge (check daily)
Fuel Filter Replacement: Every 500 hours or 6 months
Hydraulic Oil Filter Replacement: Every 1,000 hours
Hydraulic Oil Change: Every 2,000 hours
Transmission Fluid and Filter Change: Every 1,000 hours
Drive Axle Oil Change: Every 1,000 hours
Coolant Change: Every 2,000 hours or 2 years
Chassis Greasing: Every 50 hours or weekly
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |