Cat 2PD7000 Specifications
The Cat 2PD7000 is a heavy-duty Class V internal
combustion pneumatic tire forklift built for outdoor applications requiring
substantial lifting capacity. Powered by a Mitsubishi S4S diesel engine, it
provides reliable torque and power for handling 7,000 lb loads across rough
terrain and improved surfaces. Operators benefit from a well-designed
compartment with intuitive controls, good all-around visibility, and a
comfortable seat that reduces fatigue during long shifts. The robust
construction, durable powertrain, and serviceable components contribute to its
reputation as a dependable workhorse in challenging environments.
Engine Model: Mitsubishi S4S
Power Type: Diesel
Continuous Output S.A.E. gross: 51 hp (38.5 kW)
Rated Speed: 2,250 rpm
Maximum Torque S.A.E. gross: 138 lb-ft (185 Nm)
Torque Speed: 1,800 rpm
Number of Cylinders: 4
Displacement: 203 cu in (3.3 L)
Bore and Stroke: 3.70 x 3.70 in (94 x 94 mm)
Compression Ratio: 18.5:1
Firing Order: 1-3-4-2
Idle Speed: 750-800 rpm
Engine Power (alternate source): 67-74 hp (50-55 kW)
Lubrication System Type: Forced circulation with gear pump
Oil Pump Type: Gear
Oil Filter: Full-flow cartridge type
Oil Capacity (with filter): 9.5 qt (9.0 L)
Recommended Oil Viscosity: SAE 15W-40
Recommended Oil Classification: API class CH-4 or higher
Oil Pressure (at rated speed): 50-71 psi (3.4-4.9 bar)
Cooling System Type: Liquid-cooled, pressurized with centrifugal pump
Cooling Method: Forced circulation with thermostat
Radiator Type: Corrugated fin, tube type with pressurized cap
Water Pump Type: Centrifugal, belt-driven
Thermostat Opening Temperature: 180°F (82°C)
Fan Diameter: 18 in (457 mm)
Fan Drive: Belt-driven with adjustable tension
Coolant Capacity (engine only): 3.2 qt (3.0 L)
Coolant Capacity (with radiator): 11.6 qt (11.0 L)
Transmission
Transmission Manufacturer: TCM
Transmission Type: Powershift, constant mesh
Transmission Model: 11Z
Number of Speeds Forward / Reverse: 1 / 1
Transmission Control: Single lever with integrated inching control
Torque Converter Type: Single-stage, single-phase
Torque Converter Stall Ratio: 2.2:1
Travel Speed
Travel Speed Loaded: 11.0 mph (16.5 km/h)
Travel Speed Empty: 11.5 mph (18.0 km/h)
Travel Speed Reverse Loaded: 11.0 mph (16.5 km/h)
Travel Speed Reverse Empty: 11.5 mph (18.0 km/h)
Alternate travel speed loaded: 11.8 mph (19.0 km/h)
Alternate travel speed empty: 12.1 mph (19.5 km/h)
Axles
Drive Axle (Front): Full-floating, banjo type
Drive Axle Reduction: Double reduction with hypoid gears
Drive Axle Ratio: 14.5:1
Differential Type: Bevel gear with four pinions
Steer Axle (Rear): Pivot-type with articulated mount
Steer Axle Oscillation: 8.5 degrees each side
King Pin Inclination: 7.5 degrees
Brakes
Service Brake Actuation: Foot-operated, hydraulic
Service Brake Type: Self-adjusting, duo-servo
Service Brake Diameter: 11.0 in (279 mm)
Service Brake Lining Width: 2.5 in (64 mm)
Service Brake Total Lining Area: 172 sq in (1,110 sq cm)
Parking Brake Actuation: Hand-operated, mechanical
Parking Brake Type: Mechanical linkage to service brakes
System Voltage: 12V
Battery Capacity: 75 Ah (20 hour rating)
Battery Cold Cranking Amps: 650 CCA
Alternator Output: 50 A
Alternator Voltage Regulator: Integrated electronic type
Starter Motor Output: 2.0 kW
Starter Motor Type: Solenoid shift, overrunning clutch
Glow Plug System: Intake air pre-heating
Glow Plug Voltage: 10.5V
Glow Plug Current: 12 A each
Tire Type: Pneumatic
Wheel Drive: 2x driven (front)
Number of Wheels: 2 front / 2 rear
Tire Size Front (standard): 250 x 15-12PR
Tire Size Front (optional duals): 28 x 9-15-12PR
Tire Size Rear: 6.50 x 10-10PR
Front Tire Load Capacity (each): 4,520 lb at 110 psi (2,050 kg at 7.6 bar)
Rear Tire Load Capacity (each): 3,950 lb at 95 psi (1,790 kg at 6.6 bar)
Front Rim Width: 6.50 in (165 mm)
Rear Rim Width: 4.50 in (114 mm)
Steering Type: Hydraulic power steering
Steering Control: Steering wheel with hydrostatic unit
Steering Pump Type: Gear pump, engine-driven
Steering Pump Flow: 4.5 gpm at 2,250 rpm (17.0 L/min at 2,250 rpm)
Steering System Relief Pressure: 1,710 psi (118 bar)
Steering Cylinder Type: Double-acting piston type
Steering Cylinder Bore: 2.5 in (64 mm)
Steering Cylinder Stroke: 5.5 in (140 mm)
Steering Angle: 75 degrees each side
Turns Lock to Lock: 5.0
Hydraulic Pump Type: Gear pump, engine-driven
Hydraulic Pump Flow (at rated speed): 17.5 gpm (66.2 L/min)
Hydraulic System Relief Pressure: 2,625 psi (181 bar)
Relief Pressure for Attachments: 2,625 psi (181 bar)
Hydraulic Control Valve: Monoblock type with 3 spools
Hydraulic Fluid Type: ISO VG 32 or 46
Hydraulic Tank Capacity: 13.2 gal (50.0 L)
Hydraulic System Total Capacity: 16.9 gal (64.0 L)
Hydraulic Filter: Full-flow return line filter with 10 micron rating
| Service Refill Capacities |
Fuel Tank (Diesel): 15.9 gal (60.0 L)
Engine Oil (with filter change): 9.5 qt (9.0 L)
Engine Oil (without filter change): 8.5 qt (8.0 L)
Transmission Oil: 4.2 qt (4.0 L)
Drive Axle Oil: 3.2 qt (3.0 L)
Hydraulic Tank: 13.2 gal (50.0 L)
Hydraulic System Total: 16.9 gal (64.0 L)
Cooling System (with heater): 11.6 qt (11.0 L)
Cooling System (without heater): 10.6 qt (10.0 L)
Mast Type (standard): Two-stage, simplex
Mast Construction: Rolled channel sections with welded stops
Lift Chains: Three-strand roller chain with 13,200 lb (6,000 kg) breaking
strength
Lift Cylinders: Two, double-acting piston type
Lift Cylinder Bore: 3.5 in (89 mm)
Tilt Cylinders: Two, double-acting piston type
Tilt Cylinder Bore: 2.5 in (64 mm)
Tilt Cylinder Stroke: 6.3 in (160 mm)
Lift with Standard Two-Stage Mast (maximum fork height): 131 in (3,330 mm)
Lift with Standard Two-Stage Mast (free fork height): 5.9 in (150 mm)
Height with Mast Lowered: 91.0 in (2,310 mm)
Height with Mast Extended: 180 in (4,570 mm)
Fork Thickness: 2.0 in (50 mm)
Fork Width: 5.0 in (125 mm)
Fork Length: 42 in (1,070 mm)
Fork Spread (out-to-out minimum): 9.8 in (250 mm)
Fork Spread (out-to-out maximum): 39.4 in (1,000 mm)
Fork Carriage Width: 42.0 in (1,070 mm)
Fork Carriage Type: Class III, hook-type
Tilt Range (forward): 6 degrees
Tilt Range (backward): 10 degrees
Rated Capacity: 7,000 lb (3,500 kg)
Load Center Distance: 24 in (500 mm)
Lift Performance
Lift Speed Loaded: 80 fpm (410 mm/s)
Lift Speed Empty: 85 fpm (430 mm/s)
Lowering Speed Loaded: 98 fpm (500 mm/s)
Lowering Speed Empty: 98 fpm (500 mm/s)
Drawbar Pull
Drawbar Pull Loaded (60 minute rating): 3,683 lb (16,383 N)
Drawbar Pull Loaded maximum (5 minute rating): 4,102 lb (18,247 N)
Drawbar Pull Empty (60 minute rating): 2,560 lb (11,387 N)
Gradeability
Gradeability Loaded at 1 mph: 20.6%
Gradeability Loaded at 1.6 km/h: 20.6%
Gradeability Maximum Loaded: 40.6%
Gradeability Maximum Empty: 14.9%
Dimensions
Length to Fork Face: 110 in (2,790 mm)
Length with Standard Forks: 152 in (3,860 mm)
Width with Standard Tires: 51.0 in (1,300 mm)
Width with Optional Duals: 67.5 in (1,710 mm)
Height to Top of Overhead Guard: 84.5 in (2,140 mm)
Height Seat Height (unloaded): 47.7 in (1,210 mm)
Height to Top of Steering Wheel: 70.5 in (1,790 mm)
Height to Top of Counterweight: 37.5 in (953 mm)
Height to Top of Hood: 53.5 in (1,360 mm)
Wheelbase: 67.0 in (1,700 mm)
Tread Width Front (standard tires): 42.0 in (1,070 mm)
Tread Width Front (optional duals): 47.5 in (1,210 mm)
Tread Width Rear: 38.5 in (980 mm)
Minimum Outside Turning Radius: 96.0 in (2,440 mm)
Load Moment Constant: 19.5 in (495 mm)
Minimum Aisle-90 Degree Stack-Zero Clearance Without Load: 115.5 in (2,935 mm)
Minimum Aisle-90 Degree Stack-4 in Clearance With Load: 121.0 in (3,073 mm)
Ground Clearance at Lowest Point at Mast: 5.4 in (146 mm)
Ground Clearance at Center of Wheelbase: 7.0 in (180 mm)
Ground Clearance at Counterweight: 6.5 in (165 mm)
Weight
Empty Weight (with standard mast and forks): 10,590 lb (4,800 kg)
Empty Weight Distribution Front: 3,820 lb (1,730 kg)
Empty Weight Distribution Rear: 6,770 lb (3,070 kg)
Loaded Weight Distribution Front (with rated load): 15,500 lb (7,300 kg)
Loaded Weight Distribution Rear (with rated load): 2,130 lb (1,000 kg)
Engine Oil Change Interval: Every 125 hours
Engine Oil Filter Change Interval: Every 250 hours
Transmission Oil Change Interval: Every 1,000 hours
Transmission Oil Filter Change Interval: Every 1,000 hours
Drive Axle Oil Change Interval: Every 1,000 hours
Hydraulic Oil Change Interval: Every 2,000 hours
Hydraulic Filter Change Interval: Every 500 hours
Air Filter Element Replacement Interval: As needed based on indicator or every
500 hours
Fuel Filter Replacement Interval: Every 500 hours
Fuel/Water Separator Drain Interval: Daily
Cooling System Coolant Change Interval: Every 2,000 hours or 2 years
Brake Fluid Change Interval: Every 1,000 hours or 1 year
Valve Clearance Inspection Interval: Every 1,000 hours
Valve Clearance (intake): 0.014 in (0.36 mm) cold
Valve Clearance (exhaust): 0.014 in (0.36 mm) cold
Injection Pressure: 2,130 psi (147 bar)
Drive Belt Tension Inspection Interval: Every 250 hours
Drive Belt Deflection (at 22 lb / 98 N force): 0.47-0.59 in (12-15 mm)
Tire Pressure Inspection Interval: Weekly or every 50 hours
Tire Pressure Front: 110 psi (7.6 bar)
Tire Pressure Rear: 95 psi (6.6 bar)
Hydraulic System Relief Pressure Test Interval: Annually
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |