Cat C3000 Specifications
The Cat C3000 is a 3,000 lb (1,361 kg) capacity cushion
tire forklift powered by an LPG or gasoline engine. This four-wheel, sit-down
counterbalanced truck is engineered for indoor warehouse and industrial
applications where maneuverability in tight spaces is essential. Power is
provided by a Nissan K21 engine mated to a single-speed powershift transmission
with hydraulic accumulator, enabling travel speeds up to 10.2 mph (16.0 km/h)
and lift speeds reaching 125 fpm (635 mm/s).
The truck features hydrostatic power steering with a high-strength cast axle
housing, a memory tilt steering column, and a responsive drive-by-wire throttle
control. A heavy-duty cast drive axle, cowl-mounted hydraulic levers with
ergonomic knobs, and a two-pedal brake system enhance operator comfort and
control. The standard two-stage mast provides 131 in (3,325 mm) of maximum fork
height. The C3000 incorporates an Engine Protection System and is available with
throttle-body fuel injection on LP models.
Engine model: Nissan K21
Power source: LPGas
Continuous output SAE gross: 52.0 hp (38.7 kW)
Rated speed: 2,400 rpm
Maximum torque SAE gross: 119 lb-ft (161 Nm)
Torque speed: 2,000 rpm
Number of cylinders: 4
Displacement: 126 cu in (2.1 L)
Fuel system: throttle-body fuel injection (LP models)
Lubrication system type: forced circulation
Oil pump type: gear
Cooling system type: water-cooled, pressurized
Radiator type: fin and tube
Transmission
Transmission type: Powershift with hydraulic accumulator
Number of speeds forward / reverse: 1 / 1
Transmission control: single lever
Travel speed
Travel speed loaded: 9.8 mph (15.8 km/h)
Travel speed empty: 10.2 mph (16.0 km/h)
Axles
Front axle type: heavy-duty cast drive axle with reduction differential
Rear axle type: steering axle with high-strength cast housing
Axle load with rated load front / rear (est.): 2,315 lb / 3,752 lb (1,050 kg /
1,702 kg)
Axle load without load front / rear (est.): 7,831 lb (3,552 kg) total
Brakes
Service brake type: foot-operated, hydraulic
Service brake design: two-pedal brake system
Parking brake type: hand-operated, mechanical
System voltage: 12 V
Alternator type: Belt-driven
Starter motor: 12 V
Wheels (x=driven): number front / rear: 2x / 2
Tire type: cushion
Tire size: front, standard: 18.0x6.0x12.0-1.0/8.0
Tire size: rear: 14.0x5.0x10.0
Steering system: hydrostatic power steering with high-strength cast axle housing
Steering control: steering wheel with memory tilt steering column
Steering pump type: gear
Hydraulic pump type: high-output direct-drive gear pump
Hydraulic flow: 19.0 gpm (72.0 L/min)
Relief pressure for attachments at main: 2,250 psi (158 bar)
Relief pressure for main lift circuit: 2,250 psi (158 bar)
Control valve type: monoblock with cowl-mounted hydraulic levers
Number of hydraulic control valve sections: 2
| Service Refill Capacities |
Fuel tank capacity: 7.9 gal (30.0 L)
Engine oil including filter: 4.5 qt (4.3 L)
Transmission oil capacity: 2.4 gal (9.1 L)
Drive axle oil capacity: 1.6 qt (1.5 L)
Hydraulic system total capacity: 8.5 gal (32.2 L)
Hydraulic tank capacity: 6.5 gal (24.6 L)
Cooling system capacity: 2.4 gal (9.1 L)
Mast type (standard): two-stage
Lift with standard two-stage mast: maximum fork height: 131 in (3,325 mm)
Lift with standard two-stage mast: free fork height: 4.5 in (115 mm)
Mast type (optional): three-stage
Lift with three-stage mast: maximum fork height: 188 in (4,780 mm)
Lift with three-stage mast: free fork height: 55.0 in (1,397 mm)
Mast type (optional): two-stage full free
Lift with two-stage full free mast: maximum fork height: 131 in (3,325 mm)
Lift with two-stage full free mast: free fork height: 55.0 in (1,397 mm)
Tilt forward / backward: 5° / 10°
Mast carriage class: Class II
Mast carriage width: 44.0 in (1,118 mm)
Load backrest extension: 48 in (1,219 mm) high
Capacity: at rated load center: 3,000 lb (1,361 kg)
Capacity: at load center-distance: 24.0 in (500 mm)
Lift speed loaded / empty: 121 fpm / 125 fpm (617 mm/s
/ 635 mm/s)
Lowering speed loaded / empty: 99.0 fpm / 99.0 fpm (500 mm/s / 500 mm/s)
Drawbar pull: loaded (60 min. rating): 3,760 lb (16,715 N)
Drawbar pull: loaded maximum (5 min. rating): 4,245 lb (18,880 N)
Gradeability: loaded at 1 mph (1.6 km/h): 37.0%
Gradeability: maximum loaded / empty: 43.0% / 20.0%
Length to fork face: 82.0 in (2,085 mm)
Overall width with standard tires: 38.2 in (970 mm)
Overall width with optional duals: 39.2 in (995 mm)
Height to top of overhead guard: 81.1 in (2,060 mm)
Height: seat height: 43.3 in (1,100 mm)
Height with lowered mast: 82.9 in (2,105 mm)
Height with extended mast: 179.2 in (4,550 mm)
Tread width: front, standard tires: 32.2 in (820 mm)
Tread width: front, optional duals: 33.2 in (845 mm)
Tread width: rear tires: 31.8 in (810 mm)
Wheel base: 46.9 in (1,190 mm)
Ground clearance at lowest point at mast: 2.9 in (75.0 mm)
Ground clearance at center of wheel base: 4.5 in (116 mm)
Fork thickness x width x length: 1.4 x 4.0 x 42.0 in (35.0 x 100 x 1,070 mm)
Fork spacing out-to-out minimum / maximum: 7.85 / 32.25 in (200 / 820 mm)
Minimum outside turning radius: 70.0 in (1,777 mm)
Load moment constant: 15.3 in (390 mm)
Minimum aisle-90° stack-zero clearance without load: 85.2 in (2,165 mm)
Empty weight: 6,067 lb (2,752 kg)
Operating weight with rated load: 9,067 lb (4,113 kg)
Engine oil change interval: 250 hours under normal
conditions
Transmission oil change interval: 1,000 hours
Hydraulic oil change interval: 2,000 hours
Coolant change interval: 2,000 hours or 2 years
Brake fluid replacement interval: 1,000 hours or 1 year
Air filter element replacement interval: 500 hours or as indicated by
restriction indicator
Drive axle oil change interval: 1,000 hours
Steering system oil change interval: 1,000 hours
Valve lash adjustment interval: 500 hours
Ignition system service interval: 250 hours
Engine idle speed adjustment: 650-700 rpm
Brake pedal free play adjustment: 0.4-0.8 in (10-20 mm)
Parking brake lever travel adjustment: 5-7 notches
Hydraulic control lever free play: 0.04-0.12 in (1-3 mm).
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |