Cat C6000 Specifications
The Cat C6000 is a high-performance Class IV internal
combustion cushion tire forklift built for demanding indoor applications
requiring 6,000 lb lifting capacity. Powered by a Nissan K25 engine with
multi-port fuel injection on gasoline models or throttle-body fuel injection on
LP gas models, it provides responsive power delivery and operational efficiency.
Operators benefit from a thoughtfully designed compartment with cowl-mounted
hydraulic levers, a two-pedal brake system, and a memory tilt steering column
that enhances comfort during extended shifts.
The single-speed powershift transmission with
hydraulic accumulator ensures smooth directional changes, while the
heavy-duty cast drive axle and hydrostatic power steering contribute to
its reputation as a durable, productive workhorse in warehouse
environments. Additional features include an engine protection system,
high-output direct-drive hydraulic pump, and a 48 in high load backrest
extension.
Engine Model: Nissan K25
Power Type: Gasoline / LP gas
Continuous Output SAE gross: 60.0 hp (45.0 kW)
Rated Speed: 2,700 rpm
Maximum Torque SAE gross: 136 lb-ft (785 Nm)
Torque Speed: 1,600 rpm
Number of Cylinders: 4
Displacement: 152 cu in (2.5 L)
Fuel System: Multi-port fuel injection (gasoline models)
Fuel System: Throttle-body fuel injection (LP models)
Engine Protection System: Equipped
Ground Speed Control: Responsive drive-by-wire throttle control
Lubrication System Type: Forced circulation with gear pump
Oil Pump Type: Gear
Oil Filter: Full-flow cartridge type
Oil Capacity (with filter): Data unavailable
Cooling System Type: Liquid-cooled, pressurized with centrifugal pump
Cooling Method: Forced circulation with thermostat
Radiator Type: Corrugated fin, tube type with pressurized cap
Water Pump Type: Centrifugal, belt-driven
Transmission
Transmission Type: Powershift
Transmission Model: Single-speed powershift with hydraulic accumulator
Number of Speeds Forward / Reverse: 1/1
Transmission Control: Single lever with inching control
Torque Converter Type: Single-stage, single-phase
Travel Speed
Travel Speed Loaded: 10.0 mph (16.5 km/h)
Travel Speed Empty: 10.5 mph (17.0 km/h)
Axles
Drive Axle (Front): Heavy-duty cast drive axle
Drive Axle Reduction: Double reduction with hypoid gears
Differential Type: Bevel gear with straight spline
Steer Axle (Rear): High-strength cast axle housing with hydrostatic power
steering
Brakes
Service Brake Type: Foot-operated, hydraulic
Service Brake Actuation: Two-pedal brake system
Parking Brake Type: Hand-operated, mechanical
System Voltage: 12 V
Battery: Lead-acid
Alternator: 50A
Alternator Regulation: Integral electronic
Tire Type: Cushion
Wheel Drive: 2x driven (front)
Number of Wheels: 2 front / 2 rear
Tire Size Front (standard): 21.0 x 8.0 x 15.0
Tire Size Rear: 16.0 x 6.0 x 10.0-1.0/2.0
Tire Type Description: Single cushion drive and steer tires
Steering Type: Hydrostatic power steering with high-strength cast axle housing
Steering Control: Steering wheel with memory tilt steering column
Steering Pump Type: Gear pump, engine-driven
Steering Cylinder Type: Double-acting piston type
Hydraulic Pump Type: High-output direct-drive gear pump
Hydraulic Pump Flow: 23.5 gpm (89.0 L/min)
Hydraulic System Relief Pressure: 2,250 psi (158 bar)
Relief Pressure for Attachments: 2,250 psi (158 bar)
Hydraulic Control Valve: Monoblock type, cowl-mounted with ergonomic knobs
Mast Type (standard): Two-stage
Mast Construction: Rolled channel sections with welded stops
Lift Cylinders: Two, double-acting piston type
Tilt Cylinders: Two, double-acting piston type
Lift with Standard Two-Stage Mast (maximum fork height): 130 in (3,310 mm)
Lift with Standard Two-Stage Mast (free fork height): 5.3 in (135 mm)
Height with Mast Lowered: 83.5 in (2,110 mm)
Height with Mast Extended: 179 in (4,540 mm)
Fork Thickness: 1.8 in (45.0 mm)
Fork Width: 4.9 in (125 mm)
Fork Length: 42.0 in (1,070 mm)
Fork Spread (out-to-out minimum): 8.0 in (200 mm)
Fork Spread (out-to-out maximum): 38.0 in (960 mm)
Fork Carriage Type: Hook-type
Load Backrest Extension: 48 in high
Tilt Range (forward / backward): 5 deg / 6 deg
Rated Capacity at Load Center: 6,000 lb (3,000 kg)
Load Center Distance: 24.0 in (500 mm)
Lift Speed Loaded: 105 fpm (530 mm/s)
Lift Speed Empty: 105 fpm (540 mm/s)
Lowering Speed Loaded: 98 fpm (500 mm/s)
Lowering Speed Empty: 99 fpm (500 mm/s)
Drawbar Pull Loaded (60 minute rating): 4,500 lb (20,000 N)
Drawbar Pull Loaded maximum (5 minute rating): 5,100 lb (22,600 N)
Gradeability Loaded at 1 mph: 30.4%
Gradeability Loaded at 1.6 km/h: 30.4%
Gradeability Maximum Loaded: 34.8%
Gradeability Maximum Empty: 19.6%
Dimensions
Length to Fork Face: 96.5 in (2,450 mm)
Width with Standard Tires: 44.0 in (1,115 mm)
Width with Optional Duals: 45.5 in (1,155 mm)
Height to Top of Overhead Guard: 82.0 in (2,075 mm)
Height Seat Height: 43.0 in (1,090 mm)
Wheelbase: 55.0 in (1,400 mm)
Tread Width Front (standard tires): 36.0 in (911.8 mm)
Tread Width Front (optional duals): 37.5 in (952 mm)
Tread Width Rear: 35.0 in (890 mm)
Minimum Outside Turning Radius: 82.5 in (2,095 mm)
Load Moment Constant: 17.2 in (435 mm)
Minimum Aisle-90 Degree Stack-Zero Clearance Without Load: 99.5 in (2,530 mm)
Ground Clearance at Lowest Point at Mast: 3.1 in (80.0 mm)
Ground Clearance at Center of Wheelbase: 5.4 in (139 mm)
Weight
Empty Weight: 9,480 lb (4,300 kg)
Axle Load with Rated Load Front (est.): 2,897 lb (1,314 kg)
Axle Load with Rated Load Rear (est.): 6,583 lb (2,986 kg)
Axle Load without Load (est.): 13,378 lb (6,068 kg)
Engine oil change interval: 250 hours under normal
conditions
Transmission oil change interval: 1,000 hours
Hydraulic oil change interval: 2,000 hours
Coolant change interval: 2,000 hours or 2 years
Brake fluid replacement interval: 1,000 hours or 1 year
Air filter element replacement interval: 500 hours or as indicated by
restriction indicator
Drive axle oil change interval: 1,000 hours
Steering system oil change interval: 1,000 hours
Valve lash adjustment interval: 500 hours
Ignition system service interval: 250 hours
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |