Cat DP150 Specifications
The Cat DP150 is a heavy-duty Class V internal
combustion pneumatic tire forklift built for demanding outdoor applications
requiring 33,000 lb (15,000 kg) lifting capacity. Powered by a Mitsubishi 6D16
engine, it provides reliable torque and power for handling extremely heavy loads
across rough terrain and improved surfaces. Operators benefit from a
well-designed compartment with intuitive controls, good all-around visibility,
and a comfortable seat that reduces fatigue during long shifts. The robust
construction, durable powertrain, and serviceable components contribute to its
reputation as a dependable workhorse in challenging environments.
Engine Model: Mitsubishi 6D16
Power Type: Diesel
Continuous Output SAE gross: 131 hp (98 kW)
Rated Speed: 2,200 rpm
Maximum Torque SAE gross: 347 lb-ft (480 Nm)
Torque Speed: 1,400 rpm
Number of Cylinders: 6
Displacement: 460 cu.in (7.5 L)
Lubrication System Type: Forced circulation with gear pump
Oil Pump Type: Gear
Oil Filter: Full-flow cartridge type
Cooling System Type: Liquid-cooled, pressurized with centrifugal pump
Cooling Method: Forced circulation with thermostat
Radiator Type: Corrugated fin, tube type with pressurized cap
Water Pump Type: Centrifugal, belt-driven
Transmission Type: Automatic Powershift
Number of Speeds Forward / Reverse: 3 / 3
Transmission Control: Single lever with inching control
Torque Converter Type: Single-stage, single-phase
Travel Speed Loaded: 12.8 mph (20.5 km/h)
Travel Speed Empty: 20.5 mph (33.0 km/h)
Drive Axle (Front): Full-floating, banjo type
Differential Type: Bevel gear with straight spline
Steer Axle (Rear): Pivot-type with articulated mount
Service Brake Actuation: Foot-operated, hydraulic
Service Brake Type: Hydraulic
Parking Brake Actuation: Hand-operated, mechanical
Parking Brake Type: Mechanical linkage to service brakes
System Voltage: 24V
Alternator: 75A
Starter: 6kW
Tire Type: Pneumatic
Wheel Drive: 4x driven (front) / 2 steer (rear)
Number of Wheels: 4 front / 2 rear
Tire Size Front: 12.00 x 20-18 FR
Tire Size Rear: 12.00 x 20-18 FR
Steering Type: Hydraulic power steering
Steering Control: Steering wheel with hydrostatic unit
Steering Pump Type: Gear pump, engine-driven
Steering Cylinder Type: Double-acting piston type
Hydraulic Pump Type: Gear pump, engine-driven
Hydraulic System Relief Pressure: 2,465 psi (170 bar)
Relief Pressure for Attachments: 2,465 psi (170 bar)
Hydraulic Control Valve: Monoblock type
Mast Type (standard): Two-stage
Mast Construction: Rolled channel sections with welded stops
Lift Chains: Heavy-duty roller chain
Lift Cylinders: Two, double-acting piston type
Tilt Cylinders: Two, double-acting piston type
Lift with Standard Two-Stage Mast (max fork height): 133 in (3,300 mm)
Height with Mast Lowered: 137.2 in (3,485 mm)
Height with Mast Extended: 205.9 in (5,230 mm)
Fork Thickness: 3.5 in (90 mm)
Fork Width: 7.1 in (180 mm)
Fork Length: 43 in (1,220 mm)
Fork Spread (out-to-out minimum): 41.5 in (1,055 mm)
Fork Spread (out-to-out maximum): 89.0 in (2,260 mm)
Tilt Range Forward: 15 deg
Tilt Range Backward: 12 deg
Rated Capacity at Load Center: 33,000 lb (15,000 kg)
Load Center Distance: 24 in (600 mm)
Lift Speed Loaded: 55 fpm (0.23 m/s)
Lift Speed Empty: 61 fpm (0.31 m/s)
Lowering Speed Loaded: 75 fpm (0.38 m/s)
Lowering Speed Empty: 82 fpm (0.42 m/s)
Drawbar Pull Loaded (60 minute rating): 15,550 lb (69,165 N)
Drawbar Pull Loaded maximum (5 minute rating): 21,715 lb (96,594 N)
Gradeability Loaded at 1 mph: 19%
Gradeability Maximum Loaded: 31%
Gradeability Maximum Empty: 32%
Length to Fork Face: 190.2 in (4,830 mm)
Width with Standard Tires: 102.4 in (2,600 mm)
Height to Top of Overhead Guard: 113.2 in (2,875 mm)
Seat Height: 70.5 in (1,790 mm)
Wheelbase: 122 in (3,700 mm)
Tread Width Front: 75 in (7,905 mm)
Tread Width Rear: 74.4 in (7,890 mm)
Ground Clearance at Lowest Point at Mast: 10.2 in (260 mm)
Ground Clearance at Center of Wheelbase: 14.9 in (380 mm)
Minimum Outside Turning Radius: 179.1 in (4,550 mm)
Load Moment Constant: 31.3 in (795 mm)
Minimum Aisle-90 Degree Stack-Zero Clearance w/o Load: 210.4 in (5,345 mm)
Empty Weight: 39,160 lb (17,760 kg)
Axle Load with Rated Load Front (est.): 65,320 lb (29,660 kg)
Axle Load with Rated Load Rear (est.): 6,840 lb (3,100 kg)
Axle Load without Load Front (est.): 17,510 lb (7,940 kg)
Axle Load without Load Rear (est.): 21,650 lb (9,820 kg)
Engine Oil Change Interval: 250 hours
Engine Oil Filter Change Interval: 250 hours
Transmission Fluid Change Interval: 1,000 hours
Hydraulic Oil Change Interval: 2,000 hours
Hydraulic Filter Change Interval: 500 hours
Coolant Change Interval: 2,000 hours or 2 years
Differential Oil Change Interval: 1,000 hours
Air Cleaner Element Replacement: When indicator shows restriction
Fuel Filter Replacement: 500 hours
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |