Cat P3500 Specifications
The Cat P3500 is a capable Class V internal combustion
pneumatic tire forklift built for general material handling requiring 3,500 lb
lifting capacity. Powered by a Nissan K21 engine with gasoline or LPG fuel
options, it provides adequate power delivery and operational efficiency.
Operators benefit from a functional compartment with intuitive controls, good
visibility through the mast area, and a comfortable seat suitable for various
shift lengths. The single-speed powershift transmission ensures smooth
directional changes, while the hydrostatic power steering and 78 in (1,975 mm)
turning radius enhance maneuverability in confined spaces. The pneumatic tires
provide traction and stability on uneven surfaces, making this model adaptable
to varied working environments.
Engine Model: Nissan K21
Power Type: Gasoline / LP Gas
Continuous Output SAE gross: 54.5 hp (41.0 kW)
Rated Speed: 2,875 rpm
Maximum Torque SAE gross: 110 lb-ft (155 Nm)
Torque Speed: 1,600 rpm
Number of Cylinders: 4
Displacement: 128 cu.in (2,066 cc)
Lubrication System Type: Forced circulation with gear pump
Oil Pump Type: Gear
Oil Filter: Full-flow cartridge type
Cooling System Type: Liquid-cooled, pressurized with centrifugal pump
Cooling Method: Forced circulation with thermostat
Radiator Type: Corrugated fin, tube type with pressurized cap
Water Pump Type: Centrifugal, belt-driven
Transmission Type: Powershift
Number of Speeds Forward / Reverse: 1/1
Transmission Control: Single lever with inching control
Torque Converter Type: Single-stage, single-phase
Travel Speed Loaded: 11.0 mph (17.5 km/h)
Travel Speed Empty: 12.0 mph (19.0 km/h)
Drive Axle (Front): Full-floating, banjo type
Differential Type: Bevel gear with straight spline
Steer Axle (Rear): Pivot-type with articulated mount
Service Brake Actuation: Foot-operated, hydraulic
Service Brake Type: Hydraulic
Parking Brake Actuation: Hand-operated, mechanical
Parking Brake Type: Mechanical linkage to service brakes
System Voltage: 12V
Battery: Standard lead-acid
Ignition System: Electronic
Tire Type: Pneumatic
Wheel Drive: 2x driven (front)
Number of Wheels: 2 front / 2 rear
Tire Size Front: 6.50 x 10-10 PR
Tire Size Rear: 5.00 x 8-8 PR
Steering Type: Hydrostatic power steering
Steering Control: Steering wheel with hydrostatic unit
Steering Pump Type: Gear pump, engine-driven
Steering Cylinder Type: Double-acting piston type
Hydraulic System Type: Open Center
Hydraulic Pump Type: Gear pump, engine-driven
Hydraulic System Relief Pressure: 2,625 psi (185 bar)
Hydraulic Control Valve: Monoblock type
Mast Type (standard): Two-stage
Mast Construction: Rolled channel sections with welded stops
Lift Chains: Heavy-duty roller chain
Lift Cylinders: Two, double-acting piston type
Tilt Cylinders: Two, double-acting piston type
Lift with Standard Two-Stage Mast (max fork height): 130.0 in (3,320 mm)
Free Lift: 4.5 in (115 mm)
Height with Mast Lowered: 84.6 in (2,140 mm)
Height with Mast Extended: 180 in (4,550 mm)
Fork Thickness: 1.4 in (35 mm)
Fork Width: 3.9 in (100 mm)
Fork Length: 42 in (1,070 mm)
Fork Spread (out-to-out minimum): 7.9 in (200 mm)
Fork Spread (out-to-out maximum): 36.2 in (920 mm)
Tilt Range Forward: 6 deg
Tilt Range Backward: 10 deg
Rated Capacity at Load Center: 3,500 lb (1,750 kg)
Load Center Distance: 24 in (500 mm)
Lift Speed Loaded: 120 fpm (620 mm/s)
Lift Speed Empty: 125 fpm (630 mm/s)
Lowering Speed Loaded: 98 fpm (500 mm/s)
Lowering Speed Empty: 98 fpm (500 mm/s)
Drawbar Pull Loaded (60 minute rating): 3,550 lb (15,700 N)
Drawbar Pull Loaded max (5 minute rating): 4,100 lb (18,200 N)
Gradeability Loaded at 1 mph: 39.0%
Gradeability Maximum Loaded: 39.7%
Gradeability Maximum Empty: 16.0%
Length to Fork Face: 90.0 in (2,285 mm)
Width with Standard Tires: 42.0 in (1,065 mm)
Wheelbase: 55.0 in (1,400 mm)
Tread Width Front: 35.0 in (885 mm)
Tread Width Rear: 35.5 in (901 mm)
Ground Clearance at Lowest Point at Mast: 4.3 in (110 mm)
Ground Clearance at Center of Wheelbase: 5.9 in (150 mm)
Height to Top of Overhead Guard: 83.0 in (2,100 mm)
Seat Height: 38.0 in (959 mm)
Minimum Outside Turning Radius: 78.0 in (1,975 mm)
Load Moment Constant: 15.7 in (400 mm)
Minimum Aisle-90 Deg Stack-Zero Clearance w/o Load: 97.5 in (2,485 mm)
Empty Weight: 6,000 lb (2,700 kg)
Axle Load with Rated Load Front (est.): 8,700 lb (3,926 kg)
Axle Load with Rated Load Rear (est.): 1,140 lb (520 kg)
Axle Load without Load Front (est.): 2,330 lb (1,060 kg)
Axle Load without Load Rear (est.): 3,625 lb (1,660 kg)
Engine oil change interval: 250 hours under normal
conditions
Transmission oil change interval: 1,000 hours
Hydraulic oil change interval: 2,000 hours
Coolant change interval: 2,000 hours or 2 years
Brake fluid replacement interval: 1,000 hours or 1 year
Air filter element replacement interval: as indicated by restriction indicator
Drive axle oil change interval: 1,000 hours
Steering system oil change interval: 1,000 hours
Valve lash adjustment interval: 500 hours
Ignition system service interval: 250 hours
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |