Cat P7000 Specifications
The Cat P7000 is a 7,000 lb (3,500 kg) capacity
pneumatic tire forklift powered by a gasoline or LPG engine. This four-wheel,
sit-down counterbalanced truck is designed for demanding material handling
applications in both indoor and outdoor environments, including construction,
manufacturing, and logistics operations. Power is provided by a Nissan K25
engine, generating 63 hp (47.0 kW) at 2,700 rpm, mated to a single-speed
powershift transmission enabling travel speeds up to 11.5 mph (18.5 km/h). The
truck features a standard two-stage mast providing 131.0 in (3,350 mm) of
maximum fork height with 5.9 in (150 mm) of free lift. With its 6°/10° mast
tilt, substantial ground clearance of 5.4 in (135 mm), and pneumatic tires
suited for varied terrain, the P7000 delivers reliable performance for
heavy-duty lifting tasks.
Engine model: Nissan K25
Power source: Gasoline / LP Gas
Continuous output SAE gross: 63.0 hp (47.0 kW)
Rated speed: 2,700 rpm
Maximum torque SAE gross: 139 lb-ft (188 Nm)
Torque speed: 1,600 rpm
Number of cylinders: 4
Displacement: 152 cu.in (2.5 L)
Lubrication system type: forced circulation
Oil pump type: gear
Cooling system type: water-cooled, pressurized
Radiator type: fin and tube
Transmission type: Powershift
Number of speeds forward / reverse: 1/1
Transmission control: single lever
Travel speed loaded: 11.0 mph (17.5 km/h)
Travel speed empty: 11.5 mph (18.5 km/h)
Front axle type: drive axle with reduction differential
Rear axle type: steering axle
Service brake type: foot-operated, hydraulic
Parking brake type: hand-operated, mechanical
System Voltage: 12V
Battery: Lead-acid
Alternator: High-output
Starter Motor: High-torque
Wheels (x=driven): number front / rear: 2x / 2
Tire type: pneumatic
Tire size: front, standard: 250 x 15-16 PR
Tire size: rear: 6.50 x 10-12 PR
Steering system: hydraulic power steering
Steering control: steering wheel
Steering pump type: gear
Hydraulic system type: Open center
Hydraulic pump type: gear pump
Relief pressure for main lift circuit: 2,625 psi (185 bar)
Control valve type: monoblock
Number of hydraulic control valve sections: 2
Mast type (standard): two-stage
Lift with standard two-stage mast: max fork height: 131.0 in (3,350 mm)
Lift with standard two-stage mast: free fork height: 5.9 in (150 mm)
Mast type (optional): three-stage
Tilt forward / backward: 6° / 10°
Height with lowered mast: 91.0 in (2,300 mm)
Height with extended mast: 180 in (4,550 mm)
Fork thickness x width x length: 2.0x5.0x42 in (50x125x1,070 mm)
Fork spacing out-to-out min / max: 9.8 / 39.4 in (250 / 1,000 mm)
Capacity: at rated load center: 7,000 lb (3,500 kg)
Capacity: at load center-distance: 24 in (500 mm)
Lift speed loaded / empty: 83 fpm / 86 fpm (420 mm/s /
440 mm/s)
Lowering speed loaded / empty: 98 fpm / 98 fpm (500 mm/s / 500 mm/s)
Drawbar pull: loaded (60 min. rating): 3,950 lb (17,600 N)
Drawbar pull: loaded maximum (5 min. rating): 4,490 lb (20,000 N)
Gradeability: loaded at 1 mph: 22.5%
Gradeability: maximum loaded / empty: 25.8% / 14.8%
Length to fork face: 110 in (2,790 mm)
Overall width with standard tires: 51.0 in (1,290 mm)
Overall width with optional duals: 67.5 in (1,715 mm)
Tread width: front, standard tires: 42.0 in (1,060 mm)
Tread width: front, optional duals: 47.5 in (1,205 mm)
Tread width: rear tires: 38.5 in (980 mm)
Wheel base: 67.0 in (1,700 mm)
Ground clearance at lowest point at mast: 5.4 in (135 mm)
Ground clearance at center of wheel base: 7.0 in (178 mm)
Height to top of overhead guard: 84.5 in (2,137 mm)
Seat height: 40.0 in (1,015 mm)
Minimum outside turning radius: 96.0 in (2,440 mm)
Load moment constant: 19.3 in (490 mm)
Minimum aisle-90° stack-zero clearance without load: 115.3 in (2,920 mm)
Empty weight: 10,200 lb (4,650 kg)
Axle load with rated load front / rear: 15,900 lb / 2,060 lb (7,200 kg / 930 kg)
Axle load without load front / rear: 3,775 lb / 6,600 lb (1,670 kg / 2,975 kg)
Transmission oil change interval: 1,000 hours
Hydraulic oil change interval: 2,000 hours
Coolant change interval: 2,000 hours or 2 years
Brake fluid replacement interval: 1,000 hours or 1 year
Air filter element replacement interval: as indicated by restriction indicator
Drive axle oil change interval: 1,000 hours
Steering system oil change interval: 1,000 hours
Valve lash adjustment interval: 500 hours
Ignition system service interval: 250 hours
Engine idle speed adjustment: 650-700 rpm
Brake pedal free play adjustment: 0.4-0.8 in (10-20 mm)
Parking brake lever travel adjustment: 5-7 notches
Hydraulic control lever free play: 0.04-0.12 in (1-3 mm).
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |