Cat TH514C Specifications
The Caterpillar TH514C telehandler is a powerful,
mid-range material-handling machine engineered to deliver strong lifting
capacity, long forward reach, and dependable performance. As part of
Caterpillar’s C-Series, it incorporates improved hydraulics, an efficient Tier-4
Interim engine, robust boom construction, and an operator-focused control
environment.
With a rated load capacity of 4,990 kg, a lift
height of 13.7 meters, and a horizontal reach of 9.2 meters, the TH514C
is well-suited for construction, agriculture, industrial logistics, and
infrastructure support. It is designed to provide high productivity,
stable handling, and simplified maintenance.
The TH514C is powered by the Cat C3.4B diesel engine
meeting Tier-4 Interim emissions.
Engine specifications:
- Model: Cat C3.4B
- Gross power: 74.5 kW (100 hp)
- Maximum torque: 420 Nm at 1,400 rpm
- Displacement: 3.4 L
- Bore: 99 mm
- Stroke: 110 mm
This engine provides strong low-end torque, quick throttle response, and solid
performance under load. It features electronically controlled fuel injection, a
high-efficiency turbocharger, and a robust cooling system designed for
heavy-duty use.
A 4-speed powershift transmission offers smooth
directional shifts and stable travel.
Forward speeds:
- 5.8 km/h
- 10.8 km/h
- 24.5 km/h
- 34.7 km/h
Reverse speeds:
- 5.5 km/h
- 10.8 km/h
- 24 km/h
Axles:
- Heavy-duty planetary axles
- Rear oscillating axle for stability
- High-bias differential layout
Brakes:
- Service brakes: servo-assisted front axle brakes
- Parking brake: mechanical brake on front axle
The TH514C uses a
12-volt electrical system with:
- 12V, 1000 CCA battery
- 120A alternator
- Integrated diagnostics
Drive
configuration:
- Front-wheel drive
- Rear-axle steering
Tires: Standard: 14.00-24 (16-ply)
The welded steel chassis structure ensures torsional rigidity and long-term
durability.
Steering is hydrostatic with rear-axle articulation.
- Turning radius over tires: 3.92 meters
- Turning radius over forks: 5.57 meters
The telehandler employs a load-sensing hydraulic system
allowing smooth multifunction operation.
Hydraulic specs:
- Maximum pressure: 250 bar
- Maximum flow: 150 L/min
- Pump type: axial-piston, variable-displacement
- Auxiliary flow: 80 L/min intermittent, 60 L/min continuous
- Hydraulic tank: 90 L
Cycle Times
- Boom up: 13.7 s
- Boom down: 14.6 s
- Tele in: 19.1 s
- Tele out: 16.6 s
- Dump: 4.8 s
- Crowd: 4.7 s
- Combined up/out: 28.0 s
- Combined down/in: 19.0 s
- Rated lift capacity: 4,990 kg
- Maximum lift height: 13.7 m
- Maximum forward reach: 9.2 m
- Load at max height (Stabilizers up): 1,814 kg
- Load at max height (Stabilizers down): 3,175 kg
- Load at max reach (Stabilizers up): 454 kg
- Load at max reach (Stabilizers down): 1,361 kg
- Drawbar pull: 98 kN
- Overall height: 2,449 mm
- Overall width: 2,036 mm
- Wheelbase: 3,200 mm
- Ground clearance: 401 mm
- Length to fork face: 5,091 mm
- Total length: 6,520 mm
- Track width: 1,979 mm
- Maximum fork height: 13.7 m
- Standard fork length: 1,200 mm
- Dump angle: up to 112°
- Crowd angle: 11°
- Turning radius: 3.92-5.57 m
- Operating weight: 11,320 kg
Periodic
maintenance:
- Engine oil/filter: every 250-500 hours
- Hydraulic filter: every 500 hours
- Transmission oil/filter: every 1,000 hours
- Axle service: every 1,000 hours
- Hydraulic oil: every 2,000 hours
- Cooling system: every 2 years
- Boom lubrication: every 50 hours
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |