Hyster H135FT Specifications
The Hyster H135FT is a robust, rider-seated forklift
built to handle loads up to 6125 kg (13500 lb) with a 610 mm (24 in) load
centre. Powered by either a GM 4.3L V6 LPG engine delivering 73 kW (98 hp) or a
Kubota 3.8L 4-cylinder turbodiesel delivering 70 kW (94 hp), the truck is
distinguished by its industrial-strength electronics, advanced cooling
technology, and a focus on operator safety and efficiency with features like the
Hyster Stability System (HSS), isolated drivetrain, and adjustable steer column.
Fitted with pneumatic tyres and a 4x2 wheel configuration, it is well-suited for
challenging outdoor terrains and improved surfaces alike. With a laden travel
speed of up to 25.7 km/h (16.0 mph) with the optional DuraMatch transmission and
a gradeability of up to 37%, it provides powerful and efficient performance in
heavy industrial settings. The Hyster H135FT incorporates advanced features
including the Pacesetter VSM on-board computer, oil-cooled wet disc brakes, a
choice of Electronic Powershift or DuraMatch transmissions, and an ergonomic
operator compartment with low noise and vibration levels.
Manufacturer: HYSTER
Model: H135FT
Power Source: Gasoline/LPG or Diesel
Operator Type: Sit-Down Rider
Load Capacity / Rated Load: 6125 kg (13500 lb)
Load Centre: 610 mm (24 in)
Load Distance, Centre of Drive Axle to Fork: 601 mm (23.7 in)
Wheelbase: 2235 mm (88.0 in)
Service Weight: 8983 kg to 9126 kg (19830 lb to 20119 lb) depending on
configuration
Axle Loadings, Laden Front/Rear: 13786 kg (30400 lb) / 1329 kg (2930 lb)
Axle Loadings, Unladen Front/Rear: 4345 kg (9580 lb) / 4648 kg (10250 lb)
Tyres: Pneumatic
Step Height: 321 mm (12.6 in)
Track Width, Front: 1846 mm (72.7 in)
Track Width, Rear: 1536 mm (60.5 in)
Gas/LPG Engine (GM
4.3L)
Engine Manufacturer/Type: GM 4.3L, V-6, electronically controlled LPG fuel
system, drive-by-wire throttle control, electronic governor, Engine Control Unit
(ECU), three-way catalytic converter exhaust system
Engine Power: 73 kW (98 hp) at 2400 rpm according to ISO 1585
Rated Speed: 2400 rpm
Rated Torque: 295 Nm (215 lb-ft) at 1800 rpm
Number of Cylinders: 6
Displacement: 4302 cc (262 cu.in)
Engine Lubrication: Wet sump
Fuel Tank: 74.8 L (19.8 gal) for Gasoline or Diesel models
Engine Cooling: Liquid-cooled with combi-cooler radiator providing 4-row
aluminum core for additional transmission oil cooling capacity; soft rubber
isolator mounted radiators increase reliability; superior counterweight tunnel
design with "pusher" type fan and enhanced shroud design maximizes cooling
capabilities
Diesel Engine (Kubota 3.8L)
Engine Manufacturer/Type: Kubota 3.8L, 4-cylinder turbodiesel, EPA Certified
Tier 4 interim compliant, cast iron block and heads, forged steel crankshaft,
turbocharger with wastegate, oil-cooled pistons, electronically controlled
high-pressure common-rail fuel system, fuel filter with water separator, Exhaust
Gas Recirculation (EGR) system, Diesel Particulate Filter (DPF), Diesel
Oxidation Catalyst (DOC)
Engine Power: 70 kW (94 hp) at 2200 rpm according to ISO 1585
Rated Speed: 2200 rpm
Rated Torque: 333 Nm (246 lb-ft) at 1600 rpm
Number of Cylinders: 4
Displacement: 3769 cc (230 cu.in)
Engine Lubrication: Wet sump with spin-on full flow oil filter
Engine Cooling: Liquid-cooled with combi-cooler radiator featuring air to air
intercooler technology for additional engine power and efficiency
Transmission Type: Electronic Powershift (standard)
with 2 forward gears and 2 reverse gears; optional DuraMatch transmission with 3
forward gears and 2 reverse gears. Transmission Features: Hydraulic inching,
electronic shift control, Soft Shift Power reversal available.
Travel Speed (Electronic Powershift), Laden/Unladen: 22.0 km/h (13.6 mph) / 22.5
km/h (14.0 mph). Travel Speed (DuraMatch), Laden/Unladen: 25.1 km/h (15.6 mph) /
25.7 km/h (15.9 mph).
Drive Axle: Front (4 driven wheels) with wet disc brakes; wheel hubs rotate on
large tapered roller bearings; top spindle bearings lubricated through easy
access lube fittings. Steer Axle: Rear with elastomeric axle mounts that absorb
shock and allow lubrication free articulation; equal-area, double-ended,
hydrostatic steering cylinder mounted in cast ductile iron axle frame.
Service Brake: Hydraulic, foot-operated, oil-cooled wet disc brakes
significantly decrease brake maintenance. Parking Brake: Mechanical,
hand-operated.
Voltage: 12 V.
Battery Type: Maintenance Free.
Cold Cranking Amps: 475 CCA or 1010 CCA (optional).
Electrical Features: CANbus communication network, Hall-effect sensors, IP66
sealed electrical connectors increase durability and simplify maintenance.
Pacesetter VSM: Industrial on-board computer with CANbus communications network
continuously monitors fluid levels and powertrain, reducing daily service checks
and preventing major repairs; state-of-the-art on-board diagnostics reduce
repair time and minimize expensive parts swapping.
Frame Construction: Robust chassis and high strength
mast design optimize capacity retention at high lifts and offer excellent
visibility and rigidity.
Wheel Drive (WD): 2-wheel drive (front)
Wheels, Number Front/Rear: 4x/2 (total 6)
Tyre Size-Front: 8.25x15 14PR (pneumatic)
Tyre Size-Rear: 8.25x15 14PR (pneumatic)
Overall Width: 2082 mm (82.0 in)
Steering Type: Hydrostatic power steering system provides smooth, precise
steering with only 4 turns lock-to-lock. Steering Control: Hydraulic; infinitely
adjustable tilt steer column allows operators to easily obtain a comfortable
driving position. Steering Features: Equal-area, double-ended, hydrostatic
steering cylinder mounted in cast ductile iron axle frame; elastomeric axle
mounts absorb shock.
Working Pressure for Attachments: 15.5 MPa (2250 psi).
Hydraulic Tank Capacity (drain & refill): 70.9 L (18.7 gal).
Hydraulic System Features: Full-flow filtration; smart placement of control
valve and hydraulic lines away from heat sources reduces operating temperature,
extending life of seals and hoses; use of leak-free O-ring face seal (ORFS)
fittings reduces leaks for enhanced reliability; in-tank hydraulic filter allows
for cleaner overall operation.
Hydraulic Controls: Cowl-mounted hydraulic control levers ; optional TouchPoint
E-hydraulic mini-levers mounted on adjustable armrest that moves with the seat.
Mast Type: 2-Stage limited free-lift (LFL) VISTA mast
standard; optional 3-Stage full free lift (FFL) available. Upright Construction:
High strength design improves capacity retention at high lifts; excellent
visibility and rigidity.
Tilt of Mast/Carriage Forward/Backward: 5 degrees / 10 degrees
Height, Mast Lowered: 3740 mm (148 in)
Free Lift (Standard): 160 mm (6 in)
Free Lift (Optional w/LBR): 2416 mm (95 in)
Lift Height: 5400 mm (212 in)
Height, Mast Extended with Load Backrest: 6754 mm (266 in)
Height, Mast Extended without Load Backrest: 6595 mm (260 in)
Forks (thickness/width/length): 60x150x1219 mm (2.5x6x48 in)
Fork Carriage Width: 1981 mm (78 in)
Fork Spacing-Minimum Inside Edge: 160 mm (6.3 in)
Fork Spacing-Maximum Outside Edge: 1876 mm (73.9 in)
Fork Carriage Type: Hook-type carriage with 1219 mm (48 in)
Lift Speed (2LFL), Laden/Unladen: 0.53 m/s (104 ft/min)
/ 0.54 m/s (106 ft/min)
Lift Speed (3FFL), Laden/Unladen: 0.51 m/s (100 ft/min) / 0.52 m/s (102 ft/min)
Lowering Speed (2LFL), Laden/Unladen: 0.58 m/s (114 ft/min) / 0.53 m/s (104
ft/min)
Lowering Speed (3FFL), Laden/Unladen: 0.53 m/s (104 ft/min) / 0.41 m/s (81
ft/min)
Maximum Drawbar Pull, Laden/Unladen: 42420 N (9352 lb) / 27530 N (6070 lb)
Drawbar Pull at 1.0 mph, Laden/Unladen: 35280 N (7778 lb) / 27530 N (6070 lb)
Drawbar Pull at 3.0 mph, Laden/Unladen: 22540 N (4968 lb) / 22130 N (4878 lb)
Maximum Gradeability: 29.1% to 37% depending on configuration
Gradeability at 1.0 mph, Laden/Unladen: 23.9% / 31.9%
Gradeability at 3.0 mph, Laden/Unladen: 15.7% / 27.6%
Load Capacity: 13,500 lb (6,125 kg)
Load Centre: 24 in (610 mm)
Wheelbase: 2235 mm (88.0 in)
Height of Overhead Guard (Standard): 2531 mm (100 in)
Height of Cab (Optional): 2549 mm (101 in)
Overall Length (to face of forks): 3604 mm (141.9 in)
Length to Face of Forks: 3604 mm (141.9 in)
Overall Width: 2082 mm (82.0 in)
Step Height: 321 mm (12.6 in)
Track Width, Front: 1846 mm (72.7 in)
Track Width, Rear: 1536 mm (60.5 in)
Ground Clearance, Laden under Mast: 146 mm (5.7 in)
Ground Clearance, Center of Wheelbase: 253 mm (10.0 in)
Right Angle Stack with Pallets (42"x48"): 5140 mm (202.4 in)
Right Angle Stack (Add Length of Load): 3921 mm (154.4 in)
90° Intersecting Aisle (with pallet 42"x48"): 2839 mm (111.8 in)
Turning Radius, Minimum Outside: 3320 mm (130.7 in)
Internal Turning Radius: 230 mm (9.1 in)
Wheelbase: 2235 mm (88.0 in)
Service Weight: 8983 kg to 9126 kg (19830 lb to 20119 lb) depending on
configuration
Axle Loadings, Laden Front/Rear: 13786 kg (30400 lb) / 1329 kg (2930 lb)
Axle Loadings, Unladen Front/Rear: 4345 kg (9580 lb) / 4648 kg (10250 lb)
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |