Hyster H210XD Specifications
The Hyster H210XD is a high-capacity heavy-duty
pneumatic-tire forklift engineered for extreme industrial operations requiring
maximum lifting strength, superior structural stability, and long-term
reliability in harsh working environments.
With a nominal lifting capacity of 21,000 lb
(9,525 kg), it belongs to Hyster’s modern XD heavy-capacity lineup -
designed for steel mills, ports, lumber yards, intermodal terminals,
heavy manufacturing, mining support operations, industrial logistics
centers, and large-scale construction supply facilities.
This forklift is built around a reinforced steel chassis, a
Tier-compliant high-torque diesel powerplant, large heavy-duty pneumatic
tires, a high-capacity hydraulic system, and a robust driveline
optimized for continuous high-load duty cycles. The H210XD features
improved operator ergonomics, modular service access, enhanced cooling
systems, and durable components that reduce maintenance intervals and
downtime.
Operators benefit from excellent visibility,
precise hydraulic control, responsive steering, and stable lift
performance at full capacity. The combination of lifting power,
mechanical strength, and serviceability makes the H210XD a premium
choice for heavy industrial tasks worldwide.
The Hyster H210XD uses high-performance, Tier-compliant
diesel engines engineered for industrial lifting power, fuel efficiency, and
long service intervals. The most common engine is the Cummins QSB 6.7-L or QSC
8.3-L diesel engine, depending on production year and emissions market.
Diesel Engine Characteristics:
- Engine model: QSB 6.7 or QSC 8.3
- Engine type: 4-stroke inline-six turbocharged
- Displacement: 6.7-8.3 L
- Rated Hp: approx. 160-200 hp (119-149 kW)
- Peak torque: approx. 520-660 lb-ft (705-895 Nm)
- Idle speed: 700-750 rpm
- Governed max speed: approx. 2,200-2,400 rpm
- Fuel type: ultra-low sulfur diesel
- Emissions control: Tier 3 / Tier 4i / Tier 4F depending on region
Lubrication System:
- Oil capacity: approx. 16-22 L (17-23 qt)
- Oil pressure at idle: approx. 25-35 psi (172-241 kPa)
- High-rpm oil pressure: approx. 55-70 psi (379-483 kPa)
- Recommended oil: SAE 15W-40
- Filtration: high-capacity full-flow oil filter, optional bypass filtration
Cooling System:
- Coolant capacity: approx. 30-36 L (31.7-38 qt)
- Thermostat opening temperature: approx. 82°C (180°F)
- Cooling pressure: approx. 14-18 psi (97-124 kPa)
- Radiator: multi-row industrial core
- Fan: heavy-duty mechanical or hydraulically driven depending on spec
- Water pump: belt-driven centrifugal
The cooling system is engineered for high ambient temperatures, dusty
environments, and continuous hydraulic load.
The H210XD uses a high-capacity industrial powershift
transmission suited for heavy-duty cycles. A large planetary reduction drive
axle supports full-capacity loads repeatedly.
Transmission
- Transmission type: 3-speed powershift
- Forward travel speed (unladen): approx. 18-21 mph (29-34 km/h)
- Reverse travel speed: approx. 12-16 mph (19-26 km/h)
- Transmission fluid capacity: approx. 25-32 L (26-34 qt)
- Recommended fluid: ATF Dexron III or heavy-duty industrial ATF
- Shift control: hydraulic clutch-pack modulation
Drive Axle
- Axle lubrication capacity: approx. 18-22 L (19-23 qt)
- Lubricant type: SAE 85W-140 or 80W-90
- Axle housing: cast-steel heavy-capacity
- Hub design: multi-stage planetary reduction
Braking System
- Service brakes: hydraulic wet-disc brakes (oil-immersed)
- Parking brake: spring-applied, hydraulic-release system
- Wet-disc design provides superior lifespan and reliability in heavy debris
environments.
The H210XD uses a sealed, vibration-resistant,
industrial-grade electrical system.
- System voltage: 12 V
- Battery capacity: approx. 180-240 Ah
- Alternator output: approx. 120-160 A
- Starter motor: approx. 5-6 kW
- Engine management: ECM-controlled diesel injection and emissions
- Connectors: sealed industrial-type harness
The forklift frame is engineered for extreme structural
loads.
Drive Configuration:
- Drive wheels: front
- Steering wheels: rear
- Drive system: 2WD heavy-duty
Tires (Pneumatic):
- Front: approx. 14.00-24
- Rear: approx. 12.00-20
- Optional: solid pneumatic for severe environments
Chassis Features:
- Reinforced cross-members
- Heavy mast support channels
- Protected routing for hoses and wiring
The H210XD features hydraulic power steering for easy maneuvering.
Steering:
- Steering type: hydrostatic orbitrol
- Pump flow: approx. 20-28 L/min (5-7.4 gpm)
- Steering axle: oscillating center-pivot
- Minimum turning radius: approx. 4.3-4.7 m (169-185 in)
Designed for high-duty lifting performance.
- Maximum hydraulic pressure: approx. 3,000-3,400 psi (207-234 bar)
- Pump type: high-volume engine-driven gear pump
- Pump flow: approx. 100-140 L/min (26-37 gpm)
- Hydraulic reservoir capacity: approx. 80-100 L (84-105 qt)
- Fluid type: ISO VG 46 or ISO VG 68
Lift and tilt cylinders are double-acting and built for high cycle counts.
| Service Refill Capacities |
- Engine oil: 16-22 L (17-23 qt)
- Cooling system: 30-36 L (31.7-38 qt)
- Transmission: 25-32 L (26-34 qt)
- Drive axle: 18-22 L (19-23 qt)
- Hydraulic tank: 80-100 L (84-105 qt)
Mast Types:
- Heavy-capacity simplex
- Duplex free-lift
- Triplex full free-lift
Mast Heights:
- Simplex: approx. 3.0-4.0 m (118-157 in)
- Duplex: approx. 3.6-4.8 m (142-189 in)
- Triplex: approx. 4.8-7.0 m (189-276 in)
Free-Lift:
- approx. 1.0-1.8 m (39-71 in)
Fork Specifications:
- Standard fork length: 1,067-1,524 mm (42-60 in)
- Optional: 1,829 mm (72 in) and longer
- Width: 150-200 mm (6-8 in)
- Thickness: 60-80 mm (2.4-3.1 in)
Rated load capacity: 21,000 lb (9,525 kg) at 24-in
(610-mm) load center
De-rating occurs with:
- Increased lift height
- Longer forks
- Attachments
- High load centers
- Lift speed (unladen): approx. 0.45-0.55 m/s (90-110
ft/min)
- Lift speed (laden): approx. 0.30-0.40 m/s (60-80 ft/min)
- Lowering speed (unladen): approx. 120-160 ft/min
- Lowering speed (laden): approx. 150-180 ft/min
- Gradeability (unladen): approx. 25-30%
- Gradeability (laden): approx. 15-20%
- Drawbar pull: approx. 18,000-26,000 N (4,046-5,846 lbf)
- Overall length to fork face: approx. 4.7-5.1 m
(185-201 in)
- Overall width: approx. 2.2-2.4 m (87-95 in)
- Overhead guard height: approx. 2.7-3.0 m (106-118 in)
- Wheelbase: approx. 3.0-3.2 m (118-126 in)
- Ground clearance: approx. 200-280 mm (7.9-11 in)
- Turning radius: approx. 4.3-4.7 m (169-185 in)
- Aisle width with pallets: approx. 6.0-6.5 m (236-256 in)
- Maximum fork height: 3.0-7.0 m
- Free lift: 1.0-1.8 m
- Fork lengths: 42-84 in
- Operating weight: 24,000-30,000 lb (10,886-13,608 kg)
- Counterweight mass: approx. 7,500-10,000 lb (3,402-4,535 kg)
250-Hour Service:
- Replace engine oil and filter
- Clean radiator and cooling module
- Lubricate mast and steer axle
- Inspect belts and hoses
500-Hour Service:
- Replace transmission filter
- Check hydraulic filtration
- Inspect axle seals
- Torque driveline bolts
1,000-Hour Service:
- Replace transmission fluid
- Replace axle oil
- Inspect hydraulic cylinders
2,000-Hour Service:
- Replace hydraulic fluid
- Replace coolant
- Perform full mast and carriage inspection
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |