Hyster H40FTS Specifications
The Hyster H40FTS is a versatile, rider-seated forklift
built to handle loads up to 1814 kg (4000 lb) with a 610 mm (24 in) load centre.
Powered by a 2.0 L, 4-cylinder PSI or Mazda LPG engine, it delivers 33 kW (44
hp) at 2700 rpm with torque of 136 Nm (100 lb-ft) at 1300 rpm. The truck is
distinguished by its sturdy construction, reliable electronic powershift
transmission with electronic inching and shift control, and a focus on operator
safety and efficiency with features like hydrostatic power steering, a
high-visibility VISTA mast, and an adjustable steer column.
Fitted with pneumatic tyres, it is well-suited for both indoor and outdoor
improved surfaces. With a laden travel speed of 21.1 km/h (13.1 mph) and a
gradeability of 24 percent, it provides efficient performance in distribution,
manufacturing, and warehousing applications. The Hyster H40FTS incorporates
advanced features including the Hyster Stability System (HSS), cowl-mounted
hydraulic control levers, square-wave anti-clog radiator, and an ergonomic
operator compartment with adjustable tilt steer column and rubber floor mat.
Manufacturer: HYSTER
Model: H40FTS
Power Source: LPG (Liquefied Petroleum Gas)
Operator Type: Sit-Down Rider
Load Capacity / Rated Load: 1814 kg (4000 lb)
Load Centre: 610 mm (24 in)
Load Distance, Centre of Drive Axle to Fork: 384 mm (15.1 in)
Wheelbase: 1385 mm (54.5 in)
Service Weight (Unladen): 3122 kg (6884 lb)
Service Weight (Laden): 4937 kg (10883 lb)
Axle Loadings, Laden Front/Rear: 4360 kg (9611 lb) / 577 kg (1272 lb)
Axle Loadings, Unladen Front/Rear: 1247 kg (2750 lb) / 1875 kg (4134 lb)
Step Height: 371 mm (14.6 in)
Tyres: Pneumatic
Engine Manufacturer/Type: PSI 2.0L or Mazda 2.0L,
4-cylinder LPG engine
Engine Power: 33 kW (44 hp) at 2700 rpm
Rated Speed: 2700 rpm
Rated Torque: 136 Nm (100 lb-ft) at 1300 rpm
Number of Cylinders: 4
Displacement: 1997 cc (122 cu.in)
Engine Lubrication: Wet sump
Engine Features: Square-wave anti-clog radiator; coil over plug ignition design
eliminates spark plug wires; Pacesetter VSM industrial on-board computer
monitors and protects engine powertrain to maximize uptime.
Engine Cooling: Liquid-cooled with superior counterweight tunnel design and
"pusher" type fan with enhanced shroud design to maximize cooling capabilities.
Transmission Type: Electronic powershift transmission
with electronic inching and electronic shift control.
Transmission Speed Forward / Reverse: 1 / 1.
Travel Speed, Laden/Unladen: 21.1 km/h (13.1 mph) / 21.5 km/h (13.4 mph).
Drive Axle: Front (2 driven wheels).
Steer Axle: Rear with robust design for durability and low maintenance.
Service Brake: Hydraulic, foot-operated.
Parking Brake: Mechanical, hand-operated.
Drivetrain Features: Neutral start switch; Auto Deceleration System extends
brake life by up to 60 percent by automatically slowing truck when accelerator
pedal released; controlled power reversal feature virtually eliminates tire
spin, increasing drive tire life by up to 50 percent.
Voltage: 12 V
Battery Type: Maintenance Free
Cold Cranking Amps: 475 CCA
Starting System: Electric starter
Alternator: Standard equipment
Body/Frame Construction: Fully welded heavy gauge frame
with integral tie downs
Wheel Drive (WD): 2-wheel drive (front)
Wheels, Number Front/Rear: 2x/2 (total 4)
Tyre Size-Front: 6.50x10-10 (pneumatic)
Tyre Size-Rear: 5.00x8.00 (pneumatic)
Overall Width (Standard Tread): 1068 mm (42.0 in)
Overall Width (Wide Tread): 1238 mm (48.7 in)
Tread, Front/Rear (Standard): 970 mm / 1000 mm (38.2 in / 39.4 in)
Tread, Front (Wide): 1405 mm (55.3 in)
Steering Type: Hydrostatic power steering.
Steering Control: Hydraulic; adjustable tilt steer column allows operators to
easily obtain a comfortable driving position; 300 mm diameter steering wheel
offset to left for greater driver comfort.
Auxiliary Hydraulic Pressure Relief for Attachments:
15.9 MPa (2300 psi).
Hydraulic Controls: Cowl-mounted hydraulic control levers.
Hydraulic System Features: Full-flow filtration; smart placement of control
valve and hydraulic lines away from heat sources reduces operating temperature,
extending life of seals and hoses; leak-free O-ring face seal (ORFS) fittings
reduce leaks for enhanced reliability ; 3-function valve and hose group
standard.
Mast Type: 2-stage limited free lift (LFL) VISTA mast
standard; optional 2-stage full free lift (FFL) and 3-stage FFL available.
Upright Construction: High strength design improves capacity retention at high
lifts; excellent visibility and rigidity.
Tilt of Mast/Carriage Forward/Backward: 6 degrees / 6 degrees
Height, Mast Lowered: 2125 mm (84 in)
Free Lift (LFL): 140 mm (5 in)
Free Lift (FFL): 902 mm (35 in)
Lift Height: 3232 mm (127 in)
Height, Mast Extended with LBR: 4455 mm (176 in)
Height, Mast Extended without LBR: 3806 mm (150 in)
Maximum Fork Height: 3232 mm (127 in)
Forks (thickness/width/length): 40 mmx100 mmx1067 mm (1.6 inx3.9 inx42 in)
Fork Carriage Width: 978 mm (38.5 in)
Fork Spread, Outside Dimensions: 955 mm (37.5 in)
Fork Carriage Type: Hook-type carriage with 1219 mm (48 in) tall load backrest
Load Capacity: 4,000 lb (1,814 kg)
Load Centre: 24 in (610 mm)
Lift Speed, Std 2-Stage LFL, Laden: 0.58 m/s (114
ft/min)
Lift Speed, Std 2-Stage LFL, Unladen: 0.60 m/s (118 ft/min)
Lift Speed, Opt 2-Stage FFL, Laden: 0.52 m/s (102 ft/min)
Lift Speed, Opt 2-Stage FFL, Unladen: 0.54 m/s (106 ft/min)
Lift Speed, Opt 3-Stage FFL, Laden: 0.54 m/s (106 ft/min)
Lift Speed, Opt 3-Stage FFL, Unladen: 0.56 m/s (110 ft/min)
Lowering Speed, Std 2-Stage LFL, Laden: 0.51 m/s (100 ft/min)
Lowering Speed, Std 2-Stage LFL, Unladen: 0.47 m/s (92 ft/min)
Lowering Speed, Opt 2-Stage FFL, Laden: 0.46 m/s (91 ft/min)
Lowering Speed, Opt 2-Stage FFL, Unladen: 0.37 m/s (73 ft/min)
Lowering Speed, Opt 3-Stage FFL, Laden: 0.48 m/s (94 ft/min)
Lowering Speed, Opt 3-Stage FFL, Unladen: 0.41 m/s (81 ft/min)
Drawbar Pull at 1 mph Laden/Unladen: 1155 kg (2546 lb) / 848 kg (1870 lb)
Gradeability at 1 mph Laden/Unladen: 24 percent / 27 percent
Wheelbase: 1385 mm (54.5 in)
Height of Overhead Guard (Standard): 2149 mm (84.6 in)
Height of Overhead Guard (Optional): 2081 mm (81.9 in)
Seat Height: 990 mm (39.0 in)
Overall Length to Tip of Forks: 3685 mm (145.1 in)
Truck Length to Face of Forks: 2271 mm (89.4 in)
Overall Width (Standard): 1068 mm (42.0 in)
Overall Width (Wide Tread): 1238 mm (48.7 in)
Ground Clearance, Lowest Point Unladen: 135 mm (5.3 in)
Ground Clearance, Lowest Point Laden (subtract 6 mm): 129 mm (5.1 in)
Ground Clearance, Centre of Wheelbase Unladen: 146 mm (5.7 in)
Aisle Width, Right Angle Stack (Add Length of Load): 2369 mm (93.3 in)
Equal Aisle, 90-Degree Intersecting Aisle: 1855 mm (74.4 in)
Turning Radius, Minimum Outside: 1985 mm (78.1 in)
Service Weight (Unladen): 3122 kg (6884 lb)
Service Weight (Laden): 4937 kg (10883 lb)
Axle Loadings, Laden Front/Rear: 4360 kg (9611 lb) / 577 kg (1272 lb)
Axle Loadings, Unladen Front/Rear: 1247 kg (2750 lb) / 1875 kg (4134 lb)
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |