Hyster H50XM Specifications
The Hyster H50XM is a versatile, rider-seated forklift
built to handle loads up to 2268 kg (5000 lb) with a 610 mm (24 in) load centre.
Available with a Mazda 2.2L LPG engine delivering 35 kW (47 hp), a GM 3.0L LPG
engine delivering 46 kW (62 hp), or a Perkins 704-26 diesel engine delivering 43
kW (57.6 hp), the truck is distinguished by its sturdy construction, reliable
powershift transmission with Monotrol pedal directional control, and a focus on
operator safety and efficiency with features like hydrostatic power steering, a
2-stage or optional 3-stage VISTA mast, and an adjustable steer column.
Fitted with pneumatic tyres, it is well-suited for both indoor and outdoor
improved surfaces. With a laden travel speed of 18.5 km/h (11.5 mph) and a
gradeability of 33-35 percent, it provides efficient performance in
distribution, manufacturing, and warehousing applications. The Hyster H50XM
incorporates advanced features including a 3-function hydraulic control valve,
integral tie downs, and an ergonomic operator compartment.
Manufacturer: HYSTER
Model: H50XM
Power Source: Gas/LPG or Diesel
Operator Type: Sit-Down Rider
Load Capacity / Rated Load: 2268 kg (5000 lb)
Load Centre: 610 mm (24 in)
Load Distance, Centre of Drive Axle to Fork: 470 mm (18.5 in)
Wheelbase: 1623 mm (63.9 in)
Service Weight: 3885 kg (8565 lb)
Axle Loadings, Laden Front/Rear: 5507 kg (12141 lb) / 726 kg (1600 lb)
Tyres: Pneumatic
Gas/LPG Engine
(Mazda 2.2L)
Engine Manufacturer/Type: Mazda 2.2L, 4-cylinder
Engine Power: 35 kW (47 hp) at 2800 rpm according to SAE standards
Rated Speed: 2800 rpm
Rated Torque: 141 Nm (104 lb-ft) at 1600 rpm
Number of Cylinders: 4
Displacement: 2184 cc (133 cu.in)
Engine Lubrication: Wet sump
Engine Cooling: Liquid-cooled
Fuel Tank: 14 US gal (53 L) for LPG models
Gas/LPG Engine (GM 3.0L)
Engine Manufacturer/Type: GM 3.0L, 4-cylinder
Engine Power: 46 kW (62 hp) / 44 kW (58.9 hp) at 2900 rpm (LPG)
Rated Speed: 2900 rpm
Number of Cylinders: 4
Displacement: 2966 cc (181 cu.in)
Engine Lubrication: Wet sump
Engine Cooling: Liquid-cooled
Diesel Engine (Perkins 704-26)
Engine Manufacturer/Type: Perkins 704-26, 4-cylinder
Engine Power: 43 kW (57.6 hp) at 2600 rpm according to SAE standards
Rated Speed: 2600 rpm
Number of Cylinders: 4
Displacement: 2442 cc (149 cu.in)
Engine Lubrication: Wet sump
Engine Cooling: Liquid-cooled
Transmission Type: Powershift with torque converter
Transmission Speed Forward / Reverse: 1 / 1
Gear Change Type: Monotrol Pedal
Travel Speed, Laden/Unladen: 18.5 km/h (11.5 mph) / 19.3 km/h (12.0 mph)
Drive Axle: Front (2 driven wheels)
Steer Axle: Rear
Service Brake: Hydraulic, foot-operated
Parking Brake: Mechanical, hand-operated
Electrical System
Voltage: 12 V
Battery: Maintenance Free
Cold Cranking Amps: 305 CCA or 590 CCA
Starting System: Electric starter
Alternator: Standard equipment
Frame Construction: Fully welded heavy gauge frame
Wheel Drive (WD): 2-wheel drive (front)
Wheels, Number Front/Rear: 2 / 2 (total 4)
Tire Size, Front: 7.00x12-12 Ply or 7.50-15 on some configurations
Tire Size, Rear: 6.00x9-10 Ply or 6.00-9 on some configurations
Overall Width (Single Tires): 1156 mm (45.5 in)
Tread, Front: 960 mm (37.8 in)
Tread, Rear: 968 mm (38.1 in)
Steering Type: Hydrostatic power steering
Steering Control: Hydraulic; power steering standard
Relief Pressure for Attachments: 15.5 MPa (2250 psi).
Hydraulic System Features: Full-flow filtration; 3-function hydraulic control
valve standard; cowl-mounted hydraulic control levers.
Hydraulic Controls: Mechanical levers.
Hydraulic Tank Capacity: 42 L (11 gal).
Mast Type: 2-Stage limited free-lift (LFL) standard;
optional 3-Stage full free-lift (FFL) available. Upright Construction: VISTA
mast design for excellent visibility.
Tilt of Mast/Carriage Forward/Backward: 6 degrees / 6 degrees
Height, Mast Lowered: 2172 mm (85.5 in)
Free Lift (2-Stage LFL): 140 mm (5.5 in)
Free Lift (3-Stage FFL): 947 mm (37.3 in) with LBE / 1562 mm (61.5 in) without
LBE
Lift Height (2-Stage): 3327 mm (131 in)
Lift Height (3-Stage): 4415 mm (173.8 in)
Height, Mast Extended with LBE: 4554 mm (179.3 in)
Height, Mast Extended without LBE: 3942 mm (155.2 in)
Fork Dimensions (thickness/width/length): 38x127x1067 mm (1.5x5.0x42 in)
Fork Carriage Width: 1067 mm (42 in)
Load Capacity: 5,000 lb (2,268 kg)
Load Centre: 24 in (610 mm)
Lift Speed (2-Stage), Laden/Unladen: 0.59 m/s (116
ft/min) / 0.64 m/s (125 ft/min)
Lift Speed (3-Stage), Laden/Unladen: 0.56 m/s (111 ft/min) / 0.60 m/s (119
ft/min)
Lowering Speed, Laden/Unladen: 0.50 m/s (99 ft/min) / 0.42 m/s (83 ft/min)
Max Drawbar Pull, 1 mph: 20.0 kN (4499 lb) for standard; 20.8 kN (4670 lb) for
LPG
Drawbar Pull at 1 mph, LPG: 19.6 kN (4400 lb) / 18.9 kN (4243 lb)
Gradeability, Laden/Unladen (Standard): 35% / 30%
Gradeability, Laden/Unladen (LPG): 33% / 30%
Wheelbase: 1623 mm (63.9 in)
Height of Overhead Guard: 2164 mm (85.2 in)
Length to Face of Forks: 2563 mm (100.9 in)
Overall Width (Single Tires): 1156 mm (45.5 in)
Ground Clearance, Lowest Point, Unladen: 132 mm (5.2 in)
Ground Clearance, Centre of Wheelbase, Unladen: 160 mm (6.3 in)
Aisle Width, Right Angle Stack (w/ 48x48 load for 90° stack): 2692 mm (106.0 in)
Turning Radius, Minimum Outside: 2220 mm (87.4 in)
Service Weight: 3885 kg (8565 lb)
Axle Loadings, Laden Front/Rear: 5507 kg (12141 lb) / 726 kg (1600 lb)
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |