Hyster H60XT Specifications
The Hyster H60XT is a 2.7-tonne (6,000 lb) capacity,
LPG-powered, seated rider forklift, engineered for reliable performance in
demanding material handling applications. As a core model in Hyster's XT series,
this forklift is designed for versatility in industries such as warehousing,
distribution, manufacturing, and logistics. Powered by the advanced PSI 2.4L
engine, it delivers responsive power and efficient operation.
Its robust construction, pneumatic tires, and choice of 2-stage or 3-stage VISTA
masts ensure productive, safe, and efficient operation. Operator comfort and
safety features, including the Hyster Stability System (HSS), electronic
powershift transmission with MONOTROL pedal, and adjustable steer column,
contribute to exceptional handling confidence and reduced operator fatigue.
The Hyster H60XT is a counterbalanced pneumatic tire forklift truck designed for
versatility and safety. It operates on LPG (dual fuel capability) and is
controlled by a seated operator. Its rated load capacity is 2722 kg (6000 lb) at
a 610 mm (24 in) load centre. The load distance from the drive axle centre to
the fork face measures 483 mm (19 in), and the truck has a wheelbase of 1700 mm
(66.9 in).
The service weight of the truck when unladen with standard 2-stage mast is 4671
kg (10300 lb). When fully laden, the axle loading on the front axle is 6378 kg
(14064 lb) and on the rear axle is 1012 kg (2232 lb). When unladen, these
figures shift to 1908 kg (4207 lb) on the front and 2761 kg (6089 lb) on the
rear.
Basic Technical Data: The main component of the Hyster
H60XT is the PSI 2.4L engine, a four-cylinder LPG unit with electronic fuel
management. It has a total displacement of 2.3 L (143 cu.in). The engine is
rated to produce 46 kW (62 hp) at a rated speed of 2700 rpm. Maximum torque is
168 Nm (124 lb-ft) achieved at 1600 rpm. Alternative engine configurations
include the Kubota WG2503 in some model years, producing similar power output.
The fuel tank capacity is 69 L (18.2 gal) for LPG and dual fuel units.
Lubrication and Cooling: The system is designed to support continuous operation
in demanding conditions. The engine employs a forced lubrication system with
full-flow filtration to protect internal components. The cooling system features
an aluminum core, anti-clog radiator designed for efficient heat dissipation
during extended use. The radiator is engineered to maintain optimal operating
temperatures while resisting debris accumulation.
Transmission: The H60XT is equipped with an electronic
powershift transmission featuring MONOTROL pedal directional control. This
transmission allows for smooth direction changes without clutching, enhancing
operator efficiency and reducing fatigue. It features one forward gear and one
reverse gear for simple, intuitive control. The transmission is controlled and
managed by the vehicle's electronic management system.
Travel Speed: The forklift achieves a maximum travel speed of 19.8 km/h (12.3
mph) when fully laden and 20.0 km/h (12.4 mph) when unladen with the powershift
transmission.
Axles and Brakes: The truck uses a drive axle configuration with two driven
wheels on the front (2x2). The service brake system is hydraulic with foot
control, providing reliable stopping power. The parking brake is mechanical with
hand control. The brake system is designed for durability in demanding
applications.
The electrical system operates at 12 V with a
maintenance-free battery rated at 475 cold cranking amps. The alternator output
is 65 A in some configurations. The system is responsible for starting the LPG
engine and powering all lights and operator interface components. An integrated
dashboard display provides comprehensive monitoring of truck functions.
The Hyster H60XT is fitted with pneumatic tires,
designed for traction and comfort on various indoor and outdoor surfaces. It has
four wheels in total, with the front two being the driven wheels. The front tire
size is 28x9-15 (711 mm x 229 mm x 381 mm). The rear tire size is 6.50x10 (165
mm x 254 mm). The front tread width with standard tread is 1191 mm (46.9 in),
with wide tread of 1326 mm (52.2 in) available. The body and frame are
constructed of fully welded heavy gauge steel for durability. Integral tie downs
are standard for secure transport. A rubber floor mat is standard equipment.
The Hyster H60XT features hydrostatic power steering with an adjustable steer
column for operator comfort. The steering system is designed for precise control
with minimal effort. The double acting steer cylinder ensures precise and direct
steering. The mast and fork carriage can tilt forward by 6 degrees and backward
by 6 degrees to facilitate load handling and secure transport.
The hydraulic system is a core component for lift and
tilt operations. The auxiliary hydraulic pressure relief for attachments is 2550
psi (17.6 MPa). A 3-function hydraulic control valve is standard, with
cowl-mounted mechanical hydraulic control levers for convenient operation. The
hydraulic tank capacity is 42 L (11.1 gal) for drain and refill. A safety valve
provides extra safety and prevents uncontrolled lowering of the load at all
times.
The Hyster H60XT is equipped with lifting systems
available in 2-stage and 3-stage configurations, including limited free lift and
full free lift options. With the mast fully lowered, the height to the top of
the mast is 2245 mm (89 in). The free lift for standard 2-stage limited free
lift mast is 140 mm (5 in). Optional full free lift masts offer 1490 mm (58 in)
of free lift.
The maximum lift height for the standard configuration is 3209 mm (126 in), at
which point the mast extends to a total height of 4330 mm (175 in) including the
load backrest. Triplex mast configurations offer lift heights up to 4750 mm (187
in) or higher with lowered heights of 2260 mm (89 in). The fork carriage width
is 1067 mm (42 in). The standard forks have dimensions of 40 mm (1.6 in) thick,
100 mm (3.9 in) wide, and 1067 mm (42 in) long. The 2-stage limited free-lift
VISTA PLUS mast provides excellent all-round visibility.
Load Capacity: 6,000 lb (2,722 kg)
Load Centre: 24 in (610 mm)
The lift speed for the 2722 kg (6000 lb) rated load is
0.57 m/s (112 ft/min) when laden and 0.60 m/s (118 ft/min) when unladen for
standard 2-stage masts. Optional 3-stage full free lift masts provide 0.54 m/s
(106 ft/min) laden and 0.57 m/s (112 ft/min) unladen. Lowering speed is
controlled at 0.58 m/s (114 ft/min) for laden and 0.50 m/s (98 ft/min) for
unladen conditions on standard 2-stage masts.
The maximum drawbar pull is 2013 kg (4438 lb)
for a laden truck and 1149 kg (2534 lb) for an unladen truck. Drawbar
pull at 1.0 mph is 1720 kg (3792 lb) laden and 1149 kg (2534 lb)
unladen. The maximum gradeability is 23.5% with load and 27.6% without
load.
The overall length of the truck from the front face of
the backrest to the fork face is 2701 mm (106.3 in). The overall width with
standard tread is 1191 mm (46.9 in), with wide tread of 1326 mm (52.2 in).
The height of the standard overhead guard is 2250 mm (88.6 in), with an optional
height of 2150 mm (84.6 in). The step height from ground to running board is 435
mm (17.1 in). The seat height is not detailed in the provided source material.
Ground clearance minimum below the mast unladen is 104 mm (4.1 in), subtracting
6 mm when laden. At the centre of the wheelbase, ground clearance is 210 mm (8.3
in).
For maneuvering in aisles, the right-angle stacking aisle width (add length of
load) is 2802 mm (110.3 in). The 90-degree intersecting aisle width is 2108 mm
(83 in). The outer turning radius is 2324 mm (91.5 in). The total operating
weight of the truck with standard 2-stage mast is 4671 kg (10300 lb).
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |