JCB 510-55TC Specifications
The JCB 510-55TC Loadall Tool Carrier is a high-reach,
high-capacity telescopic handler engineered to deliver exceptional lifting
performance combined with the versatility of a tool-carrier attachment
interface. Designed for construction, infrastructure projects, industrial
material handling, and demanding rental fleet applications, the 510-55TC
occupies a strategic position in JCB’s Tool Carrier range, offering crane-like
reach while retaining the maneuverability and flexibility of a rigid-frame
telehandler.
With a maximum rated capacity of 10,000 lb (4,535 kg), a maximum lift height of
54 ft 9 in (16.7 m), and a maximum forward reach of approximately 41 ft 5 in
(12.6 m), the 510-55TC is well suited for placing heavy palletized materials,
structural components, and equipment at significant height and distance. The
machine is equipped with front stabilizers, Automatic Rear Axle Stabilization
(RAS), a powerful JCB EcoMAX engine, and a heavy-duty powershift drivetrain.
A reinforced high-tensile steel boom,
high-capacity hydraulics, and comprehensive load charts ensure
predictable and safe operation throughout the working envelope. Designed
in compliance with ANSI/ITSDF and ASME B56.6 standards, the 510-55TC
emphasizes safety, durability, and long-term serviceability.
The JCB 510-55TC is powered by the JCB EcoMAX 4.4-liter
turbocharged industrial diesel engine, optimized for high torque output, fuel
efficiency, and reliable operation under sustained heavy loads.
Technical Data:
Engine model: JCB EcoMAX 4.4
Engine type: Four-cylinder, four-stroke, water-cooled diesel
Displacement: 269 cu.in (4.4 L)
Number of cylinders: 4
Bore: 4.05 in (103 mm)
Stroke: 5.0 in (132 mm)
Gross power: 125 hp (93 kW) at 2,200 rpm
Maximum torque: 550 Nm (406 lb-ft) at 1,300 rpm
Aspiration: Turbocharged, charge-air cooled
Emissions compliance: Stage IV / Tier 4 Final (market dependent)
Fuel system:
High-pressure common-rail direct injection with electronic engine management for
precise fuel delivery and emissions control.
Air filtration:
Two-stage dry-type air cleaner with primary and safety elements for extended
engine life in dusty environments.
Lubrication system:
Full-pressure wet-sump lubrication system with gear-driven oil pump supplying
oil to all major engine components.
Recommended engine oil: SAE 15W-40 meeting API CK-4 or higher specifications.
Cooling system:
Liquid-cooled system with belt-driven centrifugal water pump, heavy-duty
radiator, thermostatic coolant control, and high-capacity cooling fan.
Thermostat opening temperature: approximately 82°C (180°F).
The 510-55TC uses a heavy-duty JCB powershift
transmission integrating a torque converter, bevel box, and four-speed
powershift gearbox into a single resiliently mounted unit.
Transmission:
Transmission type: 4-speed powershift with torque converter
Directional control: Steering column-mounted forward/reverse shuttle
Maximum travel speed: 18 mph (29 km/h)
Axles:
Front and rear axles are JCB epicyclic hub-reduction drive/steer axles designed
for high loads and extended reach operation.
Drive configuration: Permanent four-wheel drive
Differentials: Max-Trac torque-proportioning differentials
Braking system:
Service brakes: Hydraulically activated, self-adjusting, oil-immersed multi-disc
brakes mounted in the front axle
Parking brake: Hand-operated mechanical disc brake acting on the gearbox output
shaft
System voltage: 12 V negative ground
Battery capacity: approximately 130 Ah heavy-duty battery
Alternator output: approximately 95 A
Starter motor: High-torque industrial unit
Instrumentation and warning systems include engine speed indicator, engine
temperature gauge, fuel gauge, hour meter, road speed indicator, lateral
inclinometer, and audio-visual warnings for engine oil pressure, coolant
temperature, air filter restriction, battery charging, transmission oil
temperature and pressure, and water-in-fuel. Stabilizer status, rear axle
stabilization indication, and reverse alarm are fitted as standard.
Drive configuration: Permanent four-wheel drive
Frame construction: Heavy-duty welded steel chassis with reinforced
counterweight and stabilizer mounting points designed to withstand high bending
forces at extended boom lengths.
Boom construction:
High-tensile steel box-section telescopic boom with reinforced sections,
long-life wear pads, and internal hose routing.
Carriage type: JCB Tool Carrier interface compatible with skid-steer-style
attachments
Wheels and tires:
Standard tire specification: 17.5x25 industrial tires
Rims: Heavy-duty steel construction
Steering type: Hydrostatic power steering with power track rods on both axles
Steering mode selection: Cab-mounted selector lever
Outside turning radius (over tires): approximately 13 ft 5 in (4.1 m)
Steering modes:
Front-wheel steering
Four-wheel steering
Crab steering
Hydraulic pump: Two-stage gear pump with suction
strainer and full-flow return filtration.
Maximum operating pressure: 3,770 psi (260 bar)
Pump flow rate: 43 US gal/min (162 L/min)
Hydraulic functions:
Boom lift and lower
Boom extend and retract
Carriage tilt and dump
Auxiliary hydraulic service at boom head
Front stabilizer deployment and retraction
Hydraulic cycle times:
Boom raise: 22.7 s
Boom lower: 23.4 s
Extend: 18.3 s
Retract: 16.7 s
Bucket dump: 4.2 s
Bucket crowd: 4.6 s
Stabilizer down: 5.5 s
Stabilizer up: 4.0 s
| Service Refill Capacities |
Fuel tank capacity: 38.5 US gal (146 L)
Hydraulic oil capacity: 40 US gal (150 L)
Cooling system capacity: 6 US gal (23 L)
Maximum rated capacity: 10,000 lb (4,535 kg)
Capacity to full height (on tires): 3,000 lb (1,361 kg)
Capacity to full height (stabilizers deployed): 5,000 lb (2,269 kg)
Lift capacity at maximum forward reach: 1,000 lb (453 kg)
Maximum lift height: 54 ft 9 in (16.7 m)
Reach at maximum lift height: 6 ft 8 in (2.03 m)
Maximum forward reach: 41 ft 5 in (12.6 m)
Frame sway (left/right): ±10°
Overall height: 8 ft 10 in (2.69 m)
Overall width (over tires): 8 ft 0 in (2.44 m)
Overall length to front tires: 16 ft 8 in (5.08 m)
Overall length to front of carriage: 20 ft 10 in (6.36 m)
Wheelbase: 9 ft 0 in (2.75 m)
Ground clearance: 1 ft 4 in (0.40 m)
Standard fork length: 48 in (1,219 mm)
Optional fork lengths: 48-72 in (1,219-1,829 mm)
Fork carriage width: 66-72 in (1,676-1,829 mm)
Operating weight: 27,494 lb (12,470 kg)
250-hour service:
Change engine oil and filter. Inspect and clean air filter elements. Lubricate
boom pivots, stabilizer pins, steering joints, and chassis grease points.
500-hour service: Inspect
transmission oil condition, axle oils, hydraulic filters, brake wear, stabilizer
cylinders, and driveline components.
1,000-hour service: Replace
transmission oil and axle lubricants. Inspect hydraulic hoses, cylinders,
electrical connections, and structural fasteners.
2,000-hour service: Replace
hydraulic oil and coolant. Conduct a full structural inspection of the boom,
stabilizers, chassis welds, carriage, and attachment locking systems.
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |