Toyota 32-8FG15 Specifications
The Toyota 32-8FG15 is a compact, highly maneuverable
internal-combustion forklift designed for light-to-medium industrial
applications requiring efficiency, reliability, and exceptional stability. As
part of Toyota’s advanced 8-Series, the 32-8FG15 is equipped with Toyota’s
exclusive System of Active Stability (SAS), a high-visibility mast, durable
hydraulic components, and ergonomic operator controls.
With a nominal load capacity of 1,500 kg (3,307
lb), this model is widely used in warehouses, factories, logistics
centers, manufacturing facilities, food and beverage distribution, and
general material-handling environments.
Known for its predictable handling, smooth acceleration, low vibration
levels, and compact size, the 32-8FG15 excels in narrow aisles and
confined workspaces. Its cushion or pneumatic tire options, reinforced
steel frame, efficient LPG/gasoline engine, and fully hydraulic steering
system make it suitable for both indoor and outdoor use depending on
tire selection. Maintenance personnel favor the 32-8FG15 for its long
component life, simplified layout, easy access to service points, and
Toyota’s well-proven reliability.
The Toyota 32-8FG15 is powered by the Toyota 4Y-ECS
industrial LPG/gasoline engine.
Engine Characteristics:
- Engine model: Toyota 4Y-ECS
- Type: 4-cylinder, OHV industrial engine
- Displacement: approx. 2.2 L
- Rated Hp: approx. 40-50 hp (30-37 kW)
- Rated torque: approx. 80-95 lb-ft (108-129 Nm)
- Fuel type: LPG (primary), gasoline (optional)
- Idle speed: approx. 650-750 rpm
- Maximum governed speed: approx. 2,600-2,700 rpm
- Fuel system: electronic fuel control with mixer/regulator
- Emissions: catalytic converter optional depending on region
Lubrication System:
- Type: wet-sump, full-pressure
- Oil capacity: approx. 4.0-4.5 L (4.2-4.7 qt)
- Oil pressure at idle: approx. 25-35 psi (172-241 kPa)
- Recommended oil grade: SAE 10W-30 or 15W-40
- Oil filter: spin-on full-flow
Cooling System:
- Coolant capacity: approx. 6.5-7.5 L (6.9-7.9 qt)
- Thermostat: opens at 82°C (180°F)
- System pressure: approx. 12-15 psi (83-103 kPa)
- Water pump: belt-driven centrifugal
- Radiator: aluminum multi-row industrial core
- Cooling fan: mechanical engine-driven.
Transmission:
- Type: 1- or 2-speed powershift
- Forward speed (unladen): approx. 18-20 km/h (11-12 mph)
- Reverse speed: approx. 15-18 km/h (9-11 mph)
- Fluid capacity: approx. 4-5 L (4.2-5.3 qt)
- Recommended fluid: ATF Dexron III
- Clutch actuation: hydraulic clutch packs
Drive Axle:
- Construction: cast-steel differential housing
- Reduction: bevel gear differential with planetary final reduction
- Axle oil capacity: approx. 2.0-2.5 L (2.1-2.6 qt)
- Lubricant: SAE 80W-90
Braking System:
- Service brakes: hydraulic drum brakes (front drive wheels)
- Parking brake: mechanical hand lever.
- Voltage: 12 V
- Battery: approx. 60-70 Ah
- Alternator output: approx. 45-60 A
- Starter motor: approx. 1.5-2.0 kW
- SAS sensors: mast angle, speed, steering angle
- Ignition: electronic with feedback fuel control.
Drive
Configuration:
- Drive wheels: front
- Steering wheels: rear
- Drive type: 2WD
Tire Options:
Cushion tires (indoor):
- Front: 21x7x15
- Rear: 16x6x10.5
Pneumatic tires (outdoor/light terrain):
- Front: approx. 6.50-10
- Rear: approx. 5.00-8
Chassis Features:
- Fully welded steel frame
- Integrated counterweight
- Reinforced overhead guard
- Protected hydraulic and electrical routing
Steering:
- Type: hydrostatic power steering
- Steering pump flow: approx. 6-10 L/min (1.6-2.6 gpm)
- Steering axle: oscillating center-pivot
- Minimum turning radius: approx. 1.8-2.0 m (71-79 in).
- Maximum hydraulic pressure: approx. 2,100-2,300 psi
(145-159 bar)
- Pump type: engine-driven gear pump
- Pump flow: approx. 25-35 L/min (6.6-9.2 gpm)
- Hydraulic tank: approx. 18-22 L (19-23 qt)
- Hydraulic oil type: ISO VG 32 or VG 46
Cylinders:
- Lift cylinders: double-acting
- Tilt cylinders: dual hydraulic cylinders
- Optional attachments: sideshifter, fork positioner.
| Service Refill Capacities |
- Engine oil: 4-4.5 L (4.2-4.7 qt)
- Cooling system: 6.5-7.5 L (6.9-7.9 qt)
- Transmission: 4-5 L (4.2-5.3 qt)
- Drive axle: 2-2.5 L (2.1-2.6 qt)
- Hydraulic system: 18-22 L (19-23 qt)
Mast Types:
- Duplex (2-stage)
- Triplex (3-stage full free-lift)
Lift Heights:
- Duplex: 2.7-3.5 m (106-138 in)
- Triplex: 4.3-5.0 m (169-197 in)
Free Lift: 0.9-1.3 m (35-51 in)
Fork Specifications:
- Standard: 1,067-1,219 mm (42-48 in)
- Optional: 1,524 mm (60 in)
- Width: approx. 100 mm (4 in)
- Thickness: approx. 35-45 mm (1.4-1.75 in).
- Rated capacity: 1,500 kg (3,307 lb) at 500 mm (19.7
in) load center
- Capacity reduces with height, long forks, or attachments.
- Lift speed (unladen): 0.45-0.55 m/s (90-110 ft/min)
- Lift speed (laden): 0.30-0.40 m/s (60-80 ft/min)
- Lowering speed: 100-130 ft/min
- Gradeability (unladen): 20-25%
- Gradeability (laden): 12-15%
- Drawbar pull: 3,000-4,500 N (674-1,011 lbf).
- Length to fork face: 2.2-2.3 m (87-91 in)
- Overall width: 1.05-1.10 m (41-43 in)
- Overhead guard height: 2.0-2.1 m (79-83 in)
- Wheelbase: 1.40-1.50 m (55-59 in)
- Ground clearance: 75-90 mm (3-3.5 in)
- Turning radius: 1.8-2.0 m (71-79 in)
- Aisle width (pallet 1000x1200): 3.2-3.5 m (126-138 in)
- Max fork height: 2.7-5.0 m
- Free lift: 0.9-1.3 m
- Fork lengths: 42-60 in
- Operating weight: 2,700-3,200 kg (5,952-7,055 lb)
- Counterweight: 700-1,000 kg (1,543-2,204 lb).
250-Hour Service:
- Replace engine oil and filter
- Clean radiator fins
- Lubricate mast and steer axle
500-Hour Service:
- Replace transmission filter
- Inspect hydraulic filter
- Check driveline bolts
1,000-Hour Service:
- Replace transmission oil
- Replace axle oil
- Inspect hoses/cylinders
2,000-Hour Service:
- Replace hydraulic oil
- Replace coolant
- Full mast inspection.
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |