Toyota 60-8FD30 Specifications
The Toyota 60-8FD30 is a high-performance, mid-capacity
diesel forklift designed for demanding industrial applications requiring
durability, stability, and efficient lifting capability. As a member of Toyota’s
globally respected 8-Series diesel lineup, the 60-8FD30 integrates advanced
engineering, Toyota’s System of Active Stability (SAS), powerful low-RPM diesel
torque, and strong hydraulic performance.
With a nominal lifting capacity of 3,000 kg
(6,614 lb), it is widely used in construction supply yards, logistics
terminals, manufacturing plants, steel and lumber yards, agricultural
operations, and outdoor warehousing environments.
Operators value the 60-8FD30 for its ergonomic controls, low vibration,
excellent visibility through its wide-view mast design, and strong
traction from its pneumatic tires. Maintenance personnel appreciate
Toyota’s reputation for reliability, long component life, and ease of
service. The machine’s robust frame, reinforced mast structure, and
heavy-duty industrial drivetrain ensure long service life in
high-duty-cycle operations.
The Toyota 60-8FD30 is typically equipped with a Toyota
diesel engine from the 1ZS or 1KD series depending on region, emissions
requirements, and production year.
Diesel Engine Characteristics:
- Engine type: 4-stroke, inline-4 industrial diesel
- Displacement: approx. 2.5-3.0 L
- Rated output: approx. 40-55 kW (54-74 hp)
- Peak torque: approx. 150-200 lb-ft (203-271 Nm)
- Idle speed: approx. 700-750 rpm
- Maximum governed speed: approx. 2,400-2,600 rpm
- Fuel type: ultra-low sulfur diesel (ULSD)
- Fuel injection: electronically controlled high-pressure direct injection
- Air intake: heavy-duty dry-element air filter
Lubrication System:
- Type: full-pressure wet-sump
- Oil capacity: approx. 6-8 L (6.3-8.4 qt)
- Idle oil pressure: approx. 25-35 psi (172-241 kPa)
- High-rpm pressure: approx. 55-75 psi (379-517 kPa)
- Recommended oil: SAE 15W-40 diesel engine oil
- Filtration: removable spin-on oil filter
Cooling System:
- Cooling type: liquid-cooled
- Coolant capacity: approx. 8-10 L (8.4-10.5 qt)
- Operating pressure: approx. 12-15 psi (83-103 kPa)
- Thermostat opening temperature: approx. 82°C (180°F)
- Water pump: belt-driven centrifugal
- Fan: mechanical heavy-duty cooling fan
- Radiator: multi-row industrial aluminum core.
Transmission:
- Type: hydraulic powershift (1-speed or 2-speed depending on region)
- Forward travel speed (unladen): approx. 18-20 km/h (11-12 mph)
- Reverse speed: approx. 15-18 km/h (9-11 mph)
- Transmission fluid capacity: approx. 6-8 L (6.3-8.4 qt)
- Fluid type: ATF Dexron III
- Directional shifting: hydraulic clutch packs with electric control
Drive Axle:
- Axle design: cast-steel industrial axle
- Differential type: bevel gear
- Final reduction: planetary reduction hubs
- Axle lubrication capacity: approx. 3-4 L (3.2-4.2 qt)
- Lubricant: SAE 80W-90 gear oil
Braking System:
- Service brakes: hydraulic drum brakes (standard) or optional wet-disc brakes
- Parking brake: mechanical hand-applied brake
- Brake system designed for long service intervals and smooth control.
- System voltage: 12 V
- Battery capacity: approx. 70-90 Ah
- Alternator output: approx. 50-80 A
- Starter motor: approx. 2.0-3.0 kW
- Engine control: ECU-regulated fuel injection and timing
- Safety system: Toyota SAS (System of Active Stability)
- Sensors included: steering angle, mast angle, vehicle speed
Electrical Protection:
- Water-resistant harness connectors
- Industrial-grade insulation
- Fused distribution circuits.
Drive
Configuration:
- Drive wheels: front
- Steering wheels: rear
- Drive layout: 2-wheel drive
Tire Options (Pneumatic Default):
- Front tires: approx. 28x9-15
- Rear tires: approx. 6.50-10
Optional Tires:
- Solid pneumatic
- Non-marking tires for clean environments
Chassis Construction:
- Heavy-gauge welded steel frame
- Integrated counterweight at rear
- Reinforced overhead guard
- Protected routing of electrical and hydraulic lines
Steering axle:
- Steering system type: hydrostatic power steering
- Steering pump flow: approx. 8-12 L/min (2.1-3.2 gpm)
- Steering axle: oscillating center-pivot
- Minimum turning radius: approx. 2.3-2.5 m (91-98 in)
Steering Features:
- Low operator effort
- Enhanced stability due to SAS control inputs
- High durability kingpins and bushings.
- Maximum system pressure: approx. 2,200-2,500 psi
(152-172 bar)
- Hydraulic pump type: engine-driven gear pump
- Pump flow: approx. 35-50 L/min (9.2-13.2 gpm)
- Hydraulic tank capacity: approx. 20-25 L (21-26 qt)
- Recommended fluid: ISO VG 32 or ISO VG 46
Hydraulic Cylinders:
- Lift cylinders: dual or single arrangement depending on mast type
- Tilt cylinders: dual heavy-duty push-back cylinders
- Aftermarket attachments supported: sideshift, fork positioner, clamps
| Service Refill Capacities |
- Engine oil: 6-8 L (6.3-8.4 qt)
- Coolant: 8-10 L (8.4-10.5 qt)
- Transmission fluid: 6-8 L (6.3-8.4 qt)
- Drive axle oil: 3-4 L (3.2-4.2 qt)
- Hydraulic oil: 20-25 L (21-26 qt)
Mast Types
Available:
- Duplex (2-stage)
- Triplex (3-stage full free-lift)
Mast Heights:
- Duplex: 3.0-4.0 m (118-157 in)
- Triplex: 4.3-5.5 m (169-216 in)
Free-Lift Range: 1.0-1.3 m (39-51 in)
Fork Specifications:
- Standard lengths: 1,067-1,219 mm (42-48 in)
- Optional: 1,524 mm (60 in) or 1,829 mm (72 in)
- Width: approx. 100-125 mm (4-5 in)
- Thickness: approx. 40-50 mm (1.6-2.0 in).
Rated Capacity: 3,000 kg (6,614 lb) at a 500 mm (19.7
in) load center
Capacity Derating Factors:
- Increased lift height
- Long or non-standard forks
- Attachment weight
- Off-center loading.
- Lift speed (unladen): approx. 0.45-0.55 m/s (90-110
ft/min)
- Lift speed (laden): approx. 0.30-0.40 m/s (60-80 ft/min)
- Lowering speed: approx. 110-130 ft/min
- Gradeability (unladen): approx. 20-25%
- Gradeability (laden): approx. 12-18%
- Drawbar pull: approx. 3,500-5,500 N (785-1,235 lbf)
- Overall length to fork face: approx. 2.6-2.8 m
(102-110 in)
- Overall width: approx. 1.15-1.20 m (45-47 in)
- Overhead guard height: approx. 2.1-2.2 m (83-87 in)
- Wheelbase: approx. 1.60-1.70 m (63-67 in)
- Ground clearance: approx. 110-150 mm (4.3-5.9 in)
- Turning radius: approx. 2.3-2.5 m (91-98 in)
- Aisle width (1000x1200 pallet): approx. 3.5-3.7 m (138-146 in)
- Maximum fork height: 3.0-5.5 m depending on mast configuration
- Free lift: 1.0-1.3 m
- Fork lengths supported: 42-72 in
- Operating weight: approx. 4,200-4,800 kg (9,259-10,582 lb)
- Counterweight: approx. 1,200-1,500 kg (2,645-3,307 lb)
250-Hour
Maintenance:
- Replace engine oil and filter
- Clean radiator fins
- Lubricate mast and steer axle
- Inspect hoses and belts
500-Hour Maintenance:
- Replace transmission filter
- Inspect hydraulic filter
- Check driveline torque
- Inspect axle seals
1,000-Hour Maintenance:
- Replace transmission oil
- Replace drive axle oil
- Inspect hydraulic cylinders
2,000-Hour Maintenance:
- Replace hydraulic oil
- Replace coolant
- Full mast and carriage inspection.
____________________________________________________________________________________
| Telehandlers Specifications |
| Front-End Loader Specifications |