Case IH L340 Loader
The Case IH L340 loader fits Case IH Farmall 35A,
Farmall 40A tractors. The loader has double acting bucket and lift hydraulic
cylinders. The Case IH L340 front-end loader has a max lift height of 98.4 in
(2500 mm) at pivot pin and max bucket dump angle of 39 degrees. The lift
capacity is 1250 lbs (567 kg) to max height at pin, and boom breakout force is
2700 lbs (1225 kg).
The rated cycle times are 3.8 seconds raising
to maximum height, and 2.2 seconds maximum bucket dumping. The Case IH
L340 loader is equipped with the following buckets: a 68" (1720 mm)
standard material bucket with a rated capacity of 0.57 m3 (19.9 cu.ft),
or 66" (1670 mm) heavy-duty material bucket with a rated capacity of
0.56 m3 (19.5 cu.ft).
Tractor Models ……………… Case IH Farmall 35A, Farmall 40A
Front Tires ……………… 27x10.50-15
Rear Tires ……………… 44x18-20
Hydraulic System Flow, gpm (lpm) ……………… 9.8 (37.1)
Loader Model ……………… Case IH L340
Attachment Type ……………… Pin-On/Quick-Attach
Leveling System ……………… Non-Self Leveling
Width, in (mm) ……………… 68 (1720)
Struck Capacity, ft3 (m3) ……………… 15.9 (0.45)
Heaped Capacity, ft3 (m3) ……………… 19.9 (0.57)
Weight, lb (kg) ……………… 430 (198)
| Heavy Duty Material Bucket |
Width, in (mm) ……………… 66 (1670)
Struck Capacity, ft3 (m3) ……………… 15.6 (0.45)
Heaped Capacity, ft3 (m3) ……………… 19.5 (0.56)
Weight, lb (kg) ……………… 525 (239)
Maximum Lift Height to Pivot Pin, in (mm) ……………… 98.4 (2500)
Clearance with Bucket Dumped, in (mm) ……………… 75.3 (1913)
Reach at Maximum Lift Height, in (mm) ……………… 31 (787)
Maximum Dump Angle, degrees ……………… 39
Maximum Rollback Angle, degrees ……………… 32
Digging Depth, in (mm) ……………… 8 (203)
Lift Capacity to Full Height at Pivot Pin, lbs (kg) ……………… 1250 (567)
Lift Capacity to Full Height at 19.7" (0.5m) from Pivot Pin, lbs (kg) ……………… 890 (404)
Max Breakout Force at Bucket Pivot Pin, lbs (kg) ……………… 2700 (1225)
Max Breakout Force at 19.7" (0.5m) from Pivot Pin, lbs (kg) ……………… 1900 (862)
Raise Time to Full Height, sec ……………… 3.8
Lower Time, sec ……………… 1.7
Bucket Dump Time, sec ……………… 2.2
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |