Ford 770A Loader
The Ford 770A loader fits Ford 1910 tractor. The loader
has double acting bucket and lift hydraulic cylinders. The Ford 770A front-end
loader has a max lift height of 94 in (2380 mm) at pivot pin and max bucket dump
angle of 40 degrees. The lift capacity is 1130 lbs (510 kg) to max height at
pin, and boom breakout force is 1860 lbs (845 kg).
The rated cycle times are 4.4 seconds raising
to maximum height, and 2.6 seconds maximum bucket rollback. The Ford
770A front end loader is equipped with the following buckets: a 48"
(1220 mm) standard material bucket with a rated capacity of 13.9 cu.ft
(0.40 m3), or 60" (1520 mm) standard material bucket with a rated
capacity of 17.6 cu.ft (0.50 m3).
Tractor models ............... Ford 1910
Front tires ............... 6.0x16
Rear tires ............... 13.6x24
Hydraulic flow, gpm (lpm) ............... 6.2 (23.5)
Hydraulic pressure, bar (psi) ............... 147 (2130)
Loader model ............... Ford 770A
Attachment control type ............... Hydraulic
Lift cylinder (Number and type) ............... 2, Double action
Bucket cylinder (Number and type) ............... 2, Double action
Weight, lbs (kg) ............... 800 (365)
| Standard Material Buckets |
Width, in (mm) ............... 48 (1220)
Depth, in (mm) ............... 29 (734)
Height, in (mm) ............... 25 (633)
Capacity (Struck), cu.ft (m3) ............... 11.2 (0.32)
Capacity (Heaped), cu.ft (m3) ............... 13.9 (0.40)
Weight, lbs (kg) ............... 385 (175)
Width, in (mm) ............... 60 (1520)
Depth, in (mm) ............... 29 (734)
Height, in (mm) ............... 25 (633)
Capacity (Struck), cu.ft (m3) ............... 14.0 (0.40)
Capacity (Heaped), cu.ft (m3) ............... 17.6 (0.50)
Weight, lbs (kg) ............... 440 (200)
Maximum lift height at pivot pin, in (mm) ............... 94 (2380)
Reach at maximum height, in (mm) ............... 22 (550)
Clearance, bucket dumped, in (mm) ............... 75 (1900)
Maximum dumping angle, degrees ............... 40
Reach, bucket on ground, in (mm) ............... 54 (1370)
Rollback angle, degrees ............... 10
Maximum digging depth, in (mm) ............... 6.2 (157)
Lift capacity to maximum height, lbs (kg) ............... 1130 (510)
Breakout force at pivot pin, lbs (kg) ............... 1860 (845)
Raising time to full height, sec ............... 4.4
Lowering time, sec ............... 2.0
Bucket rollback time, sec ............... 2.6
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |