Case IH LX156 Loader
The Case IH LX156 front end loader is designed for Case
IH MXU100, MXU110, MXU125, MXU135 tractors. The front end loader has double
acting hydraulic bucket and lift cylinders. The Case IH LX156 front end loader
has a lift capacity (at bucket pin) of 3800 lbs (1725 kg) to a max height of
146" (3710 mm) and breakout force (bucket on ground) of 5300 lbs (2405 kg).
The maximum bucket dump angle is 55 degrees at
maximum height. The estimated cycle times are 4.6 seconds lifting to
maximum height, and 3.7 seconds maximum bucket dumping. The Case IH
LX156 loader is compatible with the following buckets: a 72" (1820 mm)
standard material bucket with a rated capacity of 0.61 m3 (21.3 cu.ft),
and 84" (2130 mm) standard material bucket with a heaped capacity of
0.71 m3 (24.9 cu.ft).
Tractor Models ……………… Case IH MXU100, MXU110, MXU125, MXU135
Front Tires ……………… 14.9R28
Rear Tires ……………… 18.4R38
Pump Capacity, gpm (lpm) ……………… 20.0 (75.7)
Loader Model ……………… Case IH LX156
Attachment Type ……………… Pin-On/Quick-Attach
Leveling System ……………… Non-Self Leveling
Weight, lb (kg) ……………… 1500 (680)
Width, in (mm) ……………… 72 (1800)
Struck Capacity, ft3 (m3) ……………… 16.9 (0.48)
Heaped Capacity, ft3 (m3) ……………… 21.3 (0.61)
Weight, lb (kg) ……………… 455 (207)
Width, in (mm) ……………… 84 (2130)
Struck Capacity, ft3 (m3) ……………… 19.7 (0.56)
Heaped Capacity, ft3 (m3) ……………… 24.9 (0.71)
Weight, lb (kg) ……………… 520 (236)
Maximum Lift Height to Pivot Pin, in (mm) ……………… 146 (3710)
Maximum Lift Height Under Level Bucket, in (mm) ……………… 134 (3405)
Clearance with Bucket Dumped, in (mm) ……………… 109 (2770)
Reach at Maximum Lift Height, in (mm) ……………… 55 (1397)
Reach with Bucket on Ground, in (mm) ……………… 103 (2615)
Maximum Dump Angle, degrees ……………… 55
Maximum Rollback Angle, degrees ……………… 40
Digging Depth, in (mm) ……………… 5 (127)
Lift Capacity to Full Height at 31.5" (0.8m) from Pivot Pin (Gear), lbs (kg) ……………… 3500 (1590)
Lift Capacity to Full Height at 31.5" (0.8m) from Pivot Pin (PFC), lbs (kg) ……………… 3800 (1725)
Max Breakout Force at 31.5" (0.8m) from Pivot Pin (Gear), lbs (kg) ……………… 4800 (2180)
Max Breakout Force at 31.5" (0.8m) from Pivot Pin (PFC), lbs (kg) ……………… 5300 (2405)
Raise Time to Full Height, sec ……………… 4.6
Lower Time, sec ……………… 3.1
Bucket Dump Time, sec ……………… 3.7
Bucket Rollback Time, sec ……………… 2.8
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |