Cub Cadet 485 Loader
The Cub Cadet 485 loader is used for Cub Cadet 7360
compact utility tractor. The loader hydraulic system includes double-acting
bucket and lift hydraulic cylinders. The Cub Cadet 485 front end loader has a
lifting capacity (at pivot pin) of 1430 lbs (649 kg) to maximum height of 102"
(2585 mm), and bucket's breakout force of 3220 lbs (1460 kg).
The maximum bucket dump angle is 50 degrees at
full height. The rated cycle times are 3.7 seconds lifting to maximum
height, and 3 seconds to full bucket dump. The Cub Cadet 485 non self
leveling front end loader is compatible with a 66" (1675 mm) standard
material bucket with a rated capacity of 9.7 cu.ft (0.28 m3).
Tractor Models ............. Cub Cadet 7360
Front Tire Size ............. 29x12.5-15
Hydraulic Pressure, bar (psi) ............. 147 (2135)
Hydraulic Pump Flow, gpm (lpm) ............. 8.0 (30.5)
Loader Model ............. Cub Cadet 485
Leveling System ............. Non-Self Leveling
Lift Cylinder Diameter, in (mm) ............. 2.0 (51)
Bucket Cylinder Diameter, in (mm) ............. 2.0 (51)
Width, in (mm) ............. 66 (1675)
Struck Capacity, cu.ft (cu.m) ............. 8.0 (0.23)
Heaped Capacity, cu.ft (cu.m) ............. 9.7 (0.28)
Weight, lbs (kg) ............. 235 (107)
Maximum Lift Height at Pivot Pin, in (mm) ............. 102 (2585)
Clearance with Bucket Dumped, in (mm) ............. 79 (2000)
Reach at Maximum Height, in (mm) ............. 32 (810)
Maximum Dump Angle, deg ............. 50
Digging Depth, in (mm) ............. 4.1 (105)
Maximum Rollback Angle, deg ............. 35
Reach with Bucket on Ground, in (mm) ............. 70 (1770)
Lift Capacity to Full Height at Pivot Pin, lbs (kg) ............. 1430 (649)
Breakout Force at Pivot Pin, lbs (kg) ............. 3220 (1460)
Raising Time, seconds ............. 3.7
Lowering Time, seconds ............. 2.4
Bucket Dumping Time, seconds ............. 3.0
Bucket Rollback Time, seconds ............. 2.4
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |