Ford 730 Loader
The Ford 730 front end loader is designed for Ford
2000, 3000, 3610, 4100, 4110 tractors. The front end loader has double acting
hydraulic bucket and lift cylinders. The Ford 730 front end loader has a lift
capacity (at bucket pin) of 2240 lbs (1020 kg) to a max height of 125" (3170 mm)
and breakout force (bucket on ground) of 3385 lbs (1540 kg).
The maximum bucket dump angle is 42
degrees at maximum height. The estimated cycle times are 3.6 seconds
lifting to maximum height, and 1.8 seconds maximum bucket dumping. The
Ford 730 loader is compatible with the following buckets: a 63" (1575
mm) standard material bucket with a heaped capacity of 15 cu.ft (0.43
m3), and 73" (1855 mm) light material bucket with a heaped capacity of
20.3 cu.ft (0.58 m3).
Tractor Models ..................... Ford 2000, 3000, 3610, 4100, 4110
Front Tires ..................... 6.00x16
Rear Tires ..................... 13.6x24
Pump Capacity, gpm (lpm) ..................... 4.0-8.5 (15.2-32.3)
Hydraulic Pressure, bar (psi) ..................... 152 (2200)
Loader Model ..................... Ford 730
Attachment Control Type ..................... Hydraulic
Lift Cylinder Type ..................... Double action
Lift Cylinder Diameter, in (mm) ..................... 2.0 (50.5)
Bucket Cylinder Type ..................... Double action
Bucket Cylinder Diameter, in (mm) ..................... 2.0 (50.5)
Weight, lbs (kg) ..................... 985 (445)
| Standard Material Buckets |
Width, in (mm) ..................... 62 (1575)
Inside Height, in (mm) ..................... 25.5 (645)
Depth, in (mm) ..................... 23.3 (590)
Struck Capacity, cu.ft (m3) ..................... 13.6 (0.39)
Heaped Capacity, cu.ft (m3) ..................... 15.0 (0.43)
Weight, lbs (kg) ..................... 360 (163)
Width, in (mm) ..................... 68 (1725)
Inside Height, in (mm) ..................... 25.5 (645)
Depth, in (mm) ..................... 21.1 (535)
Struck Capacity, cu.ft (m3) ..................... 13.5 (0.38)
Heaped Capacity, cu.ft (m3) ..................... 16.0 (0.46)
Weight, lbs (kg) ..................... 410 (186)
Width, in (mm) ..................... 73 (1855)
Inside Height, in (mm) ..................... 26.8 (678)
Depth, in (mm) ..................... 25.5 (645)
Struck Capacity, cu.ft (m3) ..................... 16.9 (0.48)
Heaped Capacity, cu.ft (m3) ..................... 20.3 (0.58)
Weight, lbs (kg) ..................... 365 (165)
Maximum Lift Height at Pivot Pin, in (mm) ..................... 125 (3170)
Reach at Maximum Lift Height (Ford 2000, 3000), in (mm) ..................... 17.3 (438)
Reach at Maximum Lift Height (Ford 3610, 4100, 4110), in (mm) ..................... 19.5 (490)
Clearance with Bucket Dumped, in (mm) ..................... 103 (2610)
Maximum Dump Angle, degrees ..................... 42
Digging Depth, in (mm) ..................... 4 (101)
Reach with Bucket on Ground (Ford 2000, 3000), in (mm) ..................... 67.0 (1695)
Reach with Bucket on Ground (Ford 3610, 4100), in (mm) ..................... 62.8 (1590)
Reach with Bucket on Ground (Ford 4110), in (mm) ..................... 62.4 (1580)
Maximum Rollback Angle, degrees ..................... 21
Lift Capacity to Full Height at Pivot Pin (Ford 2000, 3000, 4110), lbs (kg) ..................... 2240 (1020)
Lift Capacity to Full Height at Pivot Pin (Ford 3610, 4100), lbs (kg) ..................... 2350 (1070)
Breakout Force at Pivot Pin (Ford 2000, 3000, 4110), lbs (kg) ..................... 3385 (1540)
Breakout Force at Pivot Pin (Ford 3610, 4100), lbs (kg) ..................... 3550 (1610)
Raising Time to Full Height, sec ..................... 3.6
Lowering Time, sec ..................... 2.5
Bucket Dumping Time, sec ..................... 1.8
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |