Ford 768B Loader
The Ford 768B front end loader is designed for Ford
1110, 1210 tractors. The front end loader has double acting hydraulic bucket and
lift cylinders. The Ford 768B front end loader has a lift capacity (at bucket
pin) of 530 lbs (241 kg) to a max height of 70" (1770 mm) and breakout force
(bucket on ground) of 980 lbs (445 kg). The maximum bucket dump angle is 40
degrees at maximum height.
The estimated cycle times are 6 seconds lifting
to maximum height, and 4 seconds maximum bucket rollback. The Ford 768B
loader is compatible with the following buckets: a 40" (1010 mm)
standard material bucket with a heaped capacity of 6.3 cu.ft (0.15 m3),
or 48" (1220 mm) standard material bucket with a heaped capacity of 7.5
cu.ft (0.21 m3).
Tractor models ............... Ford 1110, 1210
Front tires ............... 5.00x12
Rear tires ............... 8.00x16
Hydraulic flow, gpm (lpm) ............... 4.3 (16.5)
Hydraulic pressure, bar (psi) ............... 127 (1850)
Loader model ............... Ford 768B
Attachment control type ............... Hydraulic/Mechanical
Weight, lbs (kg) ............... 540 (245)
| Standard Material Buckets |
Width, in (mm) ............... 40 (1010)
Depth, in (mm) ............... 18 (455)
Height, in (mm) ............... 19 (480)
Capacity (Struck), cu.ft (m3) ............... 4.9 (0.14)
Capacity (Heaped), cu.ft (m3) ............... 6.3 (0.15)
Weight, lbs (kg) ............... 200 (90)
Width, in (mm) ............... 48 (1220)
Depth, in (mm) ............... 18 (455)
Height, in (mm) ............... 19 (480)
Capacity (Struck), cu.ft (m3) ............... 6.0 (0.17)
Capacity (Heaped), cu.ft (m3) ............... 7.5 (0.21)
Weight, lbs (kg) ............... 230 (105)
Maximum lift height at pivot pin, in (mm) ............... 70 (1770)
Reach at maximum height, in (mm) ............... 23 (580)
Clearance, bucket dumped, in (mm) ............... 52 (1315)
Maximum dumping angle, degrees ............... 40
Reach, bucket on ground, in (mm) ............... 47.5 (1200)
Rollback angle, degrees ............... 8
Maximum digging depth, in (mm) ............... 4.5 (115)
Lift capacity to maximum height, lbs (kg) ............... 530 (241)
Breakout force at pivot pin, lbs (kg) ............... 980 (445)
Raising time to full height, sec ............... 6.0
Lowering time, sec ............... 3.5
Bucket rollback time, sec ............... 4.0
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |