Mahindra 2538L Loader
The Mahindra 2538L front end loader is designed for
Mahindra 2538 HST compact utility tractor. The front end loader has double
acting hydraulic bucket and lift cylinders. The Mahindra 2538L front end loader
has a lift capacity (at bucket pin) of 1634 lbs (743 kg) to a max height of
101.4" (2575 mm) and breakout force (bucket on ground) of 2696 lbs (1225 kg).
The maximum bucket dump angle is 40 degrees at
maximum height. The estimated cycle times are 3.5 seconds lifting to
maximum height, and 2.6 seconds maximum bucket dumping. The Mahindra
2538L loader is compatible with the following bucket: a 66" (1670 mm)
standard material bucket with a heaped capacity of 14.5 cu.ft (0.41 m3).
Tractor Models ……………… Mahindra 2538 HST
Front Tire Sizes ……………… 10.0-16.5
Rear Tire Sizes ……………… 43x16-20
Pump Flow, gpm (lpm) ……………… 7.6 (28.9)
Loader Model ……………… Mahindra 2538L
Leveling System ……………… Non Self Leveling
Tool Attachment Type ……………… Pin-On
Operating Weight, lb (kg) ……………… 981 (446)
| Standard Materials Bucket |
Width, in (mm) ……………… 66 (1670)
Struck Capacity, ft3 (m3) ……………… 11.8 (0.34)
Heaped Capacity, ft3 (m3) ……………… 14.5 (0.41)
Weight, lb (kg) ……………… 298 (135)
Width, in (mm) ……………… 66 (1675)
Depth, in (mm) ……………… 43 (1090)
Height, in (mm) ……………… 22 (560)
Tine Spacing, in (mm) ……………… 3 (76)
Tine Diameter, in (mm) ……………… 1.13 (28.5)
Number of Tines ……………… 22
Weight, lb (kg) ……………… 625 (284)
Maximum Lift Height to Pivot Pin, in (mm) ……………… 101.4 (2575)
Clearance with Bucket Dumped, in (mm) ……………… 79.3 (2015)
Reach at Maximum Lift Height, in (mm) ……………… 21.5 (545)
Maximum Dump Angle, deg ……………… 40
Digging Depth, in (mm) ……………… 4.5 (114)
Maximum Rollback Angle, deg ……………… 30
Lift Capacity to Full Height at Pivot Pin, lbs (kg) ……………… 1634 (743)
Breakout Force at Pivot Pin, lbs (kg) ……………… 2696 (1225)
Raising Time (Ground Level to Full Height), sec ……………… 3.5
Lowering Time (Full Height to Ground Level), sec ……………… 2.1
Dumping Time (Full Rollback to Full Dump), sec ……………… 2.6
Rollback Time (Full Dump to Full Rollback), sec ……………… 1.5
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |