Mahindra 2555L Loader
The Mahindra 2555L loader fits Mahindra 2555, 2555HST,
2565 tractors. The loader has double acting bucket and lift hydraulic cylinders.
The Mahindra 2555L front-end loader has a max lift height of 115.4 in (2930 mm)
at pivot pin and max bucket dump angle of 69 degrees. The lift capacity is 3122
lbs (1419 kg) to max height at pin, and boom breakout force is 5225 lbs (2375
kg).
The rated cycle times are 6.1 seconds raising
to maximum height, and 4.9 seconds maximum bucket dumping. The Mahindra
2555L loader is equipped with the following buckets: a 72" (1820 mm)
standard material bucket with a rated capacity of 15.9 cu.ft (0.45 m3),
or 72" (1820 mm) 4 in1 bucket with a rated capacity of 17.2 cu.ft (0.49
m3).
Tractor Models ……………… Mahindra 2555, 2555HST, 2565
Front Tire Sizes ……………… 12x16.5
Rear Tire Sizes ……………… 16.9x24
Pump Flow, gpm (lpm) ……………… 9.5-11.0 (36.1-41.8)
Loader Model ……………… Mahindra 2555L
Leveling System ……………… Non Self Leveling
Tool Attachment Type ……………… Pin-On
Operating Weight, lb (kg) ……………… 1270 (577)
| Standard Materials Bucket |
Width, in (mm) ……………… 72 (1820)
Struck Capacity, ft3 (m3) ……………… 12.8 (0.36)
Heaped Capacity, ft3 (m3) ……………… 15.9 (0.45)
Weight, lb (kg) ……………… 320 (145)
Width, in (mm) ……………… 72 (1820)
Height, in (mm) ……………… 28.1 (715)
Length, in (mm) ……………… 22.4 (570)
Grapple Width, in (mm) ……………… 57.9 (1470)
Grapple Opening, in (mm) ……………… 32.5 (825)
Tooth Position, in (mm) ……………… 19.5 (495)
Tine Spacing, in (mm) ……………… 12 (305)
Weight, lb (kg) ……………… 416 (190)
Width, in (mm) ……………… 72 (1825)
Height, in (mm) ……………… 27.3 (690)
Lenght, in (mm) ……………… 34.5 (875)
Clam Length, in (mm) ……………… 23 (585)
Back Blade Length, in (mm) ……………… 12.4 (315)
Clam Opening, in (mm) ……………… 34.6 (877)
Heaped Capacity, cu.ft (m3) ……………… 17.2 (0.49)
Weight, lb (kg) ……………… 655 (298)
Maximum Lift Height to Pivot Pin, in (mm) ……………… 115.4 (2930)
Clearance with Bucket Dumped, in (mm) ……………… 82.3 (2090)
Reach at Maximum Lift Height, in (mm) ……………… 23 (585)
Maximum Dump Angle, deg ……………… 69
Digging Depth, in (mm) ……………… 5.2 (132)
Maximum Rollback Angle, deg ……………… 39
Lift Capacity to Full Height at Pivot Pin, lbs (kg) ……………… 3122 (1419)
Breakout Force at Pivot Pin, lbs (kg) ……………… 5225 (2375)
Raising Time (Ground Level to Full Height), sec ……………… 6.1
Lowering Time (Full Height to Ground Level), sec ……………… 4.1
Dumping Time (Full Rollback to Full Dump), sec ……………… 4.9
Rollback Time (Full Dump to Full Rollback), sec ……………… 3.2
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |