Mahindra ML112 Loader
The Mahindra ML112 loader is used for Mahindra 3510,
Mahindra 4110 tractors. The loader hydraulic system includes double-acting
bucket and lift hydraulic cylinders. The Mahindra ML112 front end loader has a
lifting capacity (at pivot pin) of 1972 lbs (896 kg) to maximum height of 109.6"
(2785 mm), and bucket's breakout force of 3343 lbs (1520 kg).
The maximum bucket dump angle is 52 degrees at
full height. The rated cycle times are 5.1 seconds lifting to maximum
height, and 4.2 seconds to full bucket dump. The Mahindra ML112 loader
is compatible with a 72" (1820 mm) standard material bucket with a rated
capacity of 14 cu.ft (0.41 m3), and 72" (1820 mm) 4 in1 bucket with a
rated capacity of 17.2 cu.ft (0.49 m3).
Tractor Models ……………… Mahindra 3510, 4110
Front Tire Sizes ……………… 9.50x16
Rear Tire Sizes ……………… 14.9x24
Pump Flow, gpm (lpm) ……………… 7.9 (30.0)
Loader Model ……………… Mahindra ML112
Leveling System ……………… Non Self Leveling
Tool Attachment Type ……………… Pin-On
Operating Weight, lb (kg) ……………… 950 (432)
| Standard Materials Bucket |
Width, in (mm) ……………… 72 (1820)
Struck Capacity, ft3 (m3) ……………… 11.5 (0.33)
Heaped Capacity, ft3 (m3) ……………… 14.0 (0.41)
Weight, lb (kg) ……………… 290 (132)
Width, in (mm) ……………… 72 (1825)
Height, in (mm) ……………… 27.3 (690)
Lenght, in (mm) ……………… 34.5 (875)
Clam Length, in (mm) ……………… 23 (585)
Back Blade Length, in (mm) ……………… 12.4 (315)
Clam Opening, in (mm) ……………… 34.6 (877)
Heaped Capacity, cu.ft (m3) ……………… 17.2 (0.49)
Weight, lb (kg) ……………… 655 (298)
Maximum Lift Height to Pivot Pin, in (mm) ……………… 109.6 (2785)
Clearance with Bucket Dumped, in (mm) ……………… 89.8 (2280)
Reach at Maximum Lift Height, in (mm) ……………… 26.4 (670)
Maximum Dump Angle, deg ……………… 52
Digging Depth, in (mm) ……………… 7.1 (180)
Maximum Rollback Angle, deg ……………… 20
Lift Capacity to Full Height at Pivot Pin, lbs (kg) ……………… 1972 (896)
Breakout Force at Pivot Pin, lbs (kg) ……………… 3343 (1520)
Raising Time (Ground Level to Full Height), sec ……………… 5.1
Lowering Time (Full Height to Ground Level), sec ……………… 3.1
Dumping Time (Full Rollback to Full Dump), sec ……………… 4.2
Rollback Time (Full Dump to Full Rollback), sec ……………… 2.6
____________________________________________________________________________________
| Front-End Loader Specifications |
| Telehandlers Specifications |